• Design Convergence Study
• /
• v.17 no.4
• /
• pp.17-29
• /
• 2018

In the semi-autonomous vehicle, before reaching a fully autonomous driving stage, it is imperative for the system to issue a take-over request(TOR) that asks a driver to operate manually in a specific situation. The purpose of this study is to compare whether head-up display(HUD) is a better human-vehicle interaction than head-down display(HUD) in the event of TOR. Upon recognition of TOR in the experiment with a driving simulator, participants were prompted to switch over to manual driving after performing a secondart task, that is, playing a game, while in auto-driving mode. The results show that HUD is superior to HDD in 'ease of use' and 'satisfaction' although there is no significant difference in reaction time and subjective workload. Therefore, designing secondary tasks through HUD during autonomous driving situation improves the user experience of the TOR function. The implication of this study lies in the establishing an empirical case for setting up UX design guidelines for autonomous driving context.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.8 no.11
• /
• pp.523-530
• /
• 2018

It has been studied over the long time for the high efficiency and high power density of the power converter. It is possible to obtain higher power conversion efficiency and small volume by increasing switching frequency, however, the switching loss is also increased. The soft switching technique can overcome of the above deficiency. The design and analysis method for ZVS(Zero Voltage Switching) Phase Shifte Full bridge converter is presented in this paper. The power transfer depends on the phase difference between two legs of the power stage and the maximum power conversion efficiency is achieved by the optimum leakage inductance value. The waveform of the current and voltage of the operational mode is analysed and the corresponding switch status is plotted as on/off status. A ZVS full bridge converter for a communication rectifier with 2kW output power is implemented and its performance are verified through PSIM software simulation and experimental results.

• Journal of the Korean Wood Science and Technology
• /
• v.51 no.4
• /
• pp.239-252
• /
• 2023

In this study, bending and compression strength tests were performed to investigate effect of composition of layer layout of Larix cross-laminated timber (CLT) on mechanical properties. The Larix CLT consists of five laminae, and specimens were classified into four types according to grade and composition of layer. The layer's layout were composited as follows 1) cross-laminating layers in major and minor direction (Type A), and 2) cross-laminating external layer in major direction and internal layer applied grade of layer in minor direction (Type B). E12 and E16 were used as grades of lamina for major direction layer of Type A and external layer of Type B according to KS F 3020. In results of the bending test of CLT using same grade layer according to layer composition, the modulus of elasticity (MOE) of Type B was higher than Type A. In case of prediction of bending MOE of Larix CLT, the experimental MOE was higher than 1.00 to 1.09 times for Shear analogy method and 1.14 to 1.25 times for Gamma method. Therefore, it is recommended to predict the bending MOE for Larix CLT by shear analogy method. Compression strength of CLT in accordance with layer composition was measured to be 2% and 9% higher for Type A using E12 and E16 layers than Type B, respectively. In failure mode of Type A, progress direction of failure generated under compression load was confirmed to transfer from major layer to minor layer by rolling shear or bonding line failure due to the middle lamina in major direction.

• Journal of Korean Society on Water Environment
• /
• v.39 no.5
• /
• pp.396-412
• /
• 2023

Species from the mayfly genus Ephemera (Order Ephemeroptera) was assessed for their physical microhabitat suitability (namely E. strigata, E. separigata, and E. orientalis-sachalinensis). Probability distribution models (Exponential, Normal, Lognormal, Logistic, Weibull, Gamma, Beta, and Gumbel) based on the data collected from 23,957 sampling units of 6,787 sites in Korea from 2010 to 2021 were used. Mode and standard deviation calculated from the best-fitting models to species distribution along a water depth gradient were 265 cm and 159 cm in E. orientalis-sachalinensis; 10 cm and 83 cm in E. strigata; 20 cm and 15 cm in E. separigata, respectively. The current velocity gradient was 22 cm/s and 40 cm/s in E. orientalis-sachalinensis; 60 cm/s and 53 cm/s in E. strigata; 82 cm/s and 25 cm/s in E. separigata, respectively. The mean diameter (phi scale) of substrate grains were -3.6 and 2.2 in E. orientalis-sachalinensis; -7.4 and 1.5 in E. strigata; -5.8 and 0.9 in E. separigata, respectively. Habitat suitability range of E. orientalis-sachalinensis was estimated to be 161~369 cm (water depth), 5~44 cm/s (current velocity), -5.2~-2.0 (mean diameter); 3~34 cm (water depth), 36~94 cm/s (current velocity), -8.1~-6.3 (mean diameter) for E. strigata; 12~32 cm (water depth), 63~96 cm/s (current velocity), -6.3~-5.2 (mean diameter) for E. separigata. In relative comparison, E. orientalis-sachalinensis was estimated to be rheophobic, eurybathophilic, and eurypsephophilic; E. strigata to be euryrheophilic, bathophobic, and lithophilic; E. separigata to be stenomesorheophilic, stenobathophobic, stenolithophilic.

• Korean journal of applied entomology
• /
• v.62 no.3
• /
• pp.193-205
• /
• 2023

Botanical insecticides derived from plant extracts exhibit repellent, antifeedant and enzyme-inhibiting activities against insect pests. Among such pests, phytophagous mites are major threats to horticultural crops. Botanical extracts derived from neem, chrysanthemum, and shrubby sophora are employed as field acaricides. These botanical extracts have low toxicities against natural enemies of the insect pests and, thus, are valuable in pest management. This review focuses on the potential for botanical extracts in the controls of mites, with comparisons of the spectrum of activity, the lethal dose and times and their mode of action. This information will enable better formulation of botanical extracts in integrated mite control.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.5
• /
• pp.885-894
• /
• 2023

Setting RAM target value for a defense system plays a crucial role in the development and design phases and the production phase as well. It is apparent that the achieved RAM target value can help maximizing the combat capability of a defense system and improving its performance throughout the system's life cycle from acquisition phase to disposal. Usually a defense system operates according to its OMS/MP (Operational Mode Summary / Mission Profile) and it consists of several subsystems which are supposed to be operated at each utilization rate under its operating conditions and the mission profiles assigned. In this study, a method of setting RAM target value is proposed for a defense system that are composed of several independent subsystems considering their utilization rates and the mission profiles assigned. And the case study of applying the proposed method of setting RAM target value to system A is dealt with.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.50 no.4
• /
• pp.443-451
• /
• 2023

The purpose of this study was to evaluate whether the newly introduced calcium silicate-based materials with fast-setting properties could be appropriately used as basement materials in indirect pulp treatment (IPT). This was performed by quantifying the durability of adhesion between the material and composite resin, measured by the shear bond strength (SBS). Five calcium silicate-based materials, TheraCal LC^® (TLC), TheraCal PT^® (TPT), TheraBase^® (TB), Well-Root^TM PT (WPT), and Endocem^® MTA (EMTA), as well as two glass ionomer-based materials, Fuji II and Fuji II LC, were included. Specimens containing these materials were manufactured and bonded to composite resin with a universal adhesive applied in self-etch mode. The SBS values and failure modes were recorded, and the mean SBSs of the materials were compared. Both TPT and TB exhibited SBS values that were similar to TLC, while both WPT and EMTA appeared to have statistically lower SBS values. Mixed failure was commonly observed in TLC and TPT, while all WPT and EMTA samples showed cohesive failure. In comparison with TLC and TPT, more samples with cohesive failure were observed in TB, implying that this material forms a stronger bond with composite resin. Together with the ability of TB to chemically bind to dentin due to its 10-methacryloyloxydecyl dihydrogen phosphate component, TB seems to be a promising material for IPT within the limitations of this in vitro study.

• Korean Journal of Food Science and Technology
• /
• v.39 no.4
• /
• pp.432-437
• /
• 2007

In this study, we examined the conditions for an auto-aging system placed within a kimchi refrigerator for optimal fermentation, and to prolong the storage time of kimchi. Various characteristics of kimchi fermented at different temperatures ($5-23^{\circ}C$) were compared. We observed that the higher the fermentation temperature, the less desirable the overall acceptability of the product. To establish the time point in which to convert the fermentation mode to the storage mode, kimchi was stored at $-1^{\circ}C$ for 1 week once it reached the designated acidity (0.4, 0.6, and 0.8%). The results indicated that the lower the kimchi acidity, the higher the sensory score. The storage temperature of $-1^{\circ}C$ was not low enough to retard microorganism growth completely; however, the kimchi stored at $-2{\pm}0.5^{\circ}C$ became frozen. Accordingly, $15^{\circ}C$ and $-2{\pm}0.5^{\circ}C$ are suggested as the fermentation and storage temperatures for the kimchi refrigerator, respectively. A kimchi acidity of 0.4% can be used as an index for the time point to convert fermentation to storage. Subsequently, the time required for the fermentation course can be calculated based on this.

• Sijohaknonchong
• /
• v.22
• /
• pp.85-113
• /
• 2005

This paper's target is two music books, 100 man's Gagok songs and 88 woman's Gagok songs compiled by Kim Kee-soo. The next is an interpretation on 9 subject classifications. 1. There is a similiarity in subject between $\lceil$kyobonyukdaesijo's collection$\rfloor$ and man's Gagok song. 2. There is a wide difference in man and woman's love subject between man's Gagok songs and woman's Gagok songs. 3. The subject changes as Gagok progreasses. 4. There are many nameless writers in the prograss of Nong$\cdot$Na k$\cdot$Peon. 5. Taepeongga, whose theme is to enjoy pleasure, forms the last beauty. Sijo poem's subjects, which belongs to the noble class, shows the mode of scholar's elegant life at that time.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.11
• /
• pp.1619-1625
• /
• 2012

The purpose of this study is to determine long-term storage conditions for winter kimchi. Kimchi was stored in a kimchi refrigerator for 6 months with or without fermentation. Four different temperature systems used were as follows: 5 days at $10^{\circ}C$ followed by storage at $-2.5^{\circ}C$ (F1), 1 day at $15^{\circ}C$ followed by storage at $-2.5^{\circ}C$ (F2), storage at $-1^{\circ}C$ (S1), or at $-2.5^{\circ}C$ (S2). Time periods required for F1, F2, S1, or S2 kimchi to reach pH 4.4 and acidity 0.6% were 2, 8, 12, and 22 weeks, respectively. Lactobacillus spp. growth on F1 and F2 kimchi was faster and greater than that on S1 and S2 kimchi, revealing a maximum concentration of 8~9 verses 6.8 log CFU/mL, respectively. However, Leuconostoc spp. were fully grown (8~9 log CFU/mL) on all four kimchi samples regardless of temperature, even at $-2.5^{\circ}C$, although the times required to reach maximum growth were different. Growth of Lactobacillus and Leuconostoc spp. both decreased after reaching maximum levels, except for F1 kimchi. Sensory evaluation results for 3 month storage showed that F1 kimchi was the best among kimchi samples in terms of appearance, acidic taste, carbonated taste, crispiness, and moldy smell. For 6 months of storage, F1 and S1 kimchi were the most highly evaluated among the kimchi samples. Sensory evaluation result for S1 kimchi stored at $-1^{\circ}C$ was comparable to that of F1 kimchi due to fully grown Leuconostoc spp. Acidities of F1 and S1 kimchi after 6 months of storage were 0.8 and 0.7%, respectively. Taken together, fermentation of kimchi at $10^{\circ}C$ for 5 days followed by storage at $-2.5^{\circ}C$ for 6 months was optimal for high quality kimchi. Sensory properties of winter kimchi were significantly influenced by the degree of fermentation.