• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.4
• /
• pp.53-59
• /
• 2000

Based on the polarization selectivity of fiber-to-planar waveguide coupler, a novel fiber optic polarizer has been designed and fabricated. The large structural birefringence of a metal-clad planar waveguide enables the polarizer to have wide operating wavelength range. The polymer and gold were used for the guiding layer and cladding layer of the planar waveguide, respectively. The experimental results showed that either TE or TM polarized lightwave could be created by adjusting the thickness of planar waveguide. Operating wavelegth range satisfying more than 16㏈ polarization extinction ratio was 130nm. The average insertion loss of fabricated devices was order of 0.5㏈.

• Transactions of the Korean hydrogen and new energy society
• /
• v.26 no.4
• /
• pp.357-362
• /
• 2015

There is potential method to utilize the liquid carbon dioxide ($LCO_2$) in coal gasification plants. The $LCO_2$ could be used to effectively transport coal particles instead of conventional carrier such as liquid water ($H_2O$) particularly in wet-fed gasifier. However, there is a lack of fundamental study on the atomization behavior of $LCO_2$ coal slurry under high pressure condition. In this study, the flashing spray characteristics of a coal mixture with $LCO_2$ was examined during a throttling process by using a flow visualization system. The spray of coal water slurry which is in the Rayleigh-type break up mode was significantly different. This difference indicates that the coal water slurry did not effectively transport the coal, as compared to $LCO_2$ coal slurry.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.247-248
• /
• 2015

Wind turbines causes instabilities on the grid as their penetration increase. To mitigate harmful effects from wind turbines, transmission system operator(TSO) set up some requirements to obligate for wind generation operator for grid connection. So wind farm management system(WFMS) has important role to follow requirement from TSO, WFMS calculates available real power by considering wake effects, and dispatches real power order to each wind turbine in wind farm to optimize for decreasing load fatigue. To verify operation of WFMS, real-time simulator(RTS) is necessary. This paper deals with RTS configuration to verify WFMS operation. RTS includes wind farm model and power flow code. Normally, wind farm equivalent simple model makes wind turbines in wind farm to one wind turbine mode which cannot verify power flow in wind farm and WFMS operation. Thus, this paper makes wind farm model using simple wind turbine model with transfer function. Matlab is used for make power flow code and wind farm model to impose RTS and those model is certified by PSCAD/EMTDC.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.8
• /
• pp.75-81
• /
• 2014

It has been widely accepted that open phase may separate one of the power lines from power supply which is mainly caused by fuse melting, malfunction for source circuit breaker, contact failure, and disconnection under normal operating conditions, and is considered a kind of failure mode during disconnection of neutral wires as well. When open phase occurs, unequal voltage between phase might happen in the unbalanced load connected each phase, and further, depending on conditions of load, malfunction by providing low voltage. Moreover, load could be burned or overheated with overvoltage, which, in turn, can be a contributor to starting fires. Accordingly, in order to clearly overcome these problems, the current study aims to introduce the theory of uninterruptible power open phase compensation device, meaning that unbalanced power automatically restores balanced power and provides continuously the power supply without blackout, and verify it through simulation and experiments.

• Structural Engineering and Mechanics
• /
• v.63 no.2
• /
• pp.195-206
• /
• 2017

This paper presents the parametric numerical analysis on the ultimate bearing capacity of the purlin-sheet roofs connected by standing seam clips. The effects of several factors on failure modes and ultimate bearing capacity of the purlins are studied, including setup of anti-sag bar, purlin type, sheet thickness and connection type et al. A simplified design formula is proposed for predicting the ultimate bearing capacity of purlins. Results show that setting the anti-sag bars can improve the ultimate bearing capacity and change the failure modes of C purlins significantly. The failure modes and ultimate bearing capacity of C purlins are significantly different from those of Z purlins, in the purlin-sheet roof connected by standing seam clips. Setting the anti-sag bars near the lower flange is more favorable for increasing the ultimate bearing capacity of purlins. The ultimate bearing capacity of C purlins increases slightly with sheet thickness increasing from 0.6 mm to 0.8 mm. The ultimate bearing capacity of the purlin-sheet roofs connected by standing seam clips is always higher than those by self-drilling screws. The predictions of the proposed design formulas are relatively in good agreement with those of EN 1993-1-3: 2006, compared with GB 50018-2002.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.8 s.227
• /
• pp.1203-1211
• /
• 2004

A traction control systems (TCSs) composed of either a wheel slip controller or a throttle valve controller or an integrated controller of both systems are proposed in this study. To validatethe dynamic characteristics of a vehicle and TCS, a full car model that can simulate the responses of both front wheel drive (2WD) and four wheel drive (4WD) vehicle is also developed. The wheel slip controller uses a sliding mode control scheme and the throttle valve is controlled by a PID controller. The results shows that tHe brake TCS and the engine TCS achieve rapid acceleration, and reduce slip angle on slippery road. When a vehicle is cornering and accelerating maneuver with the brake or engine TCS, understeer or oversteer occur, depending on the driving conditions. The integrated TCS prevents most of these problems and improves the stability and controllability of the vehicle.

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.2
• /
• pp.201-208
• /
• 2006

Several carbonyl compounds are important because of their irritant and toxic properties, mutagenicity and carcinogenicity. Therefore, they are regulated in korean odor emission standard. In this study, atmospheric pressure ionization-mass spectrometry(API-MS) is used for the analysis of carbonyl compounds after derivatization with 2, 4-dinitrophenylhydrazine (DNPH) and liquid chromatographic separation. In the negative ion mode, the $[M-H]^-$ pseudomolecular ions are most abundant for the carbonyls. Analytical parameters such as linearity, repeatability and minimum detection limit were evaluated. The linearities ($r^2$) for carbonyls were $0.9977{\sim}0.9999$ when analyte concentration ranges from $25\;to\;250{\mu}g/L$(n=6). The relative standard deviations (%RSD) for carbonyls were $0.55{\sim}3.51%$ for concentration of $100{\mu}g/L$(n=5). The minimum detection limit (MDL) was $1.88{\mu}g/L$(0.27 ppb) for i-valeraldehyde. It was shown that LC-MS method has a great potential for carbonyl compounds analysis.

• Journal of Advanced Navigation Technology
• /
• v.12 no.6
• /
• pp.554-558
• /
• 2008

In this paper, we show that the SIDMA(Self-organized Time Division Multiple Access) protocol using aviation surveillance data link now, designs to the ICAO DO 9816 documentation sequence. This protocol makes use of the VDL(VHF Data Link) Mode 4 and UAT(Universal Access Transceiver) system's MAC(Media Access Control) layer. We make sure of the simulation result and implementation of STDMA protocol program in accompany with the ICAO documentation sequence. This program operates the slot allocation and reservation with report rate when protocol transmits data and calculates slot address.

• Preventive Nutrition and Food Science
• /
• v.11 no.2
• /
• pp.120-126
• /
• 2006

Fish backbone, a major by-product in the fish processing industry, accounts for about 15% of whole fish weight. In this study, recovery of bioavailable calcium from Alaska pollack (Theragra chalcogramma) backbone by-products using enzymatic hydrolysis was investigated. Finely ground fish backbones were hydrolyzed with two proteolytic enzymes (pepsin and protease) to obtain soluble calcium from the by-products. The pepsin digest had a higher degradation efficiency (88%) than protease. Four different concentrations of the fish backbone calcium (100, 250, 500 and 1000 mg/L) prepared by the pepsin digest were treated with $Na_2HPO_4$ at a concentration gradient (0, 1, 2, 4, 8, 10, 15 and 20 mM) to evaluate their solubility, revealing that solubilities of the fish backbone calcium were superior to those of $CaCl_2$ at all the calcium and $Na_2HPO_4$ concentrations. Among the tested concentrations the highest solubility was found in the pepsin digest containing a calcium concentration of 1000 mg/L. Thus, hydrolyzing with pepsin is an effective mode of recovering bioavailable calcium from Alaska pollack fish backbones.

• Journal of Wetlands Research
• /
• v.7 no.4
• /
• pp.51-65
• /
• 2005

The insects and Benthic Macro-Invertebrates are very important for index of investigation. This reserch is executed a field investigation with a date analysis of the laboratory under such as above hypothesis and we have grasped the change of the creature according to the season through the executing of field investigation(We executed six times about the insects, seven times about the Benthic Macro-Inbertebrates each expending from Apr. to Oct. 2004). The result of summary in 2004 show that, we have grasped 12 orders 56 familys 116 species on 2001 and 10 orders 42 familys 78 species on 2002 through the investigation. Also we have grasped 13 orders 53 familys 114 species on 2003 and 12 orders 63 familys 121 speceies on 2004 through the investigation. In the case of enthic Macro-Invertebrates, we executed the analysis through the investigation result expending from 2003 to 2004 due to there is no literature investigation record from 2001 to 2002. We have grasped 8 orders 17 familys 24 species on 2003 and 7 orders 11 familys 24 species on Aug. 2004 through the investigation. We executed the analysis about an each condition due to it is difficult to compare the above result simply by the various variable at the investigation. We expect that it become the fundamental reference data to establish a efficient mode of life undo plan after grasped the inhabitation and movement route of creature inside the river through this reserch.