• 상하수도학회지
• /
• 제22권1호
• /
• pp.79-86
• /
• 2008

In Korea, most of the drinking water treatment relied upon the availability of the surface water, of which the raw water quality varied significantly by season and location. Therefore, the comparison of two operation modes (Pressurized type and Submerged type membrane system) must be estimated before the long-term establishment of two systems. In this study, two pilot-scale microfiltration systems with the capacity of $50m^3/day$ were installed and operated in two different modes, and the applicability of the system was determined based on the results such as the TMP (Trans-Membrane Pressure) and flux. For quantitatively comparing the two systems, a new concept, DRF (Differential Resistance Fraction) was introduced. The accumulated sum of the permeate after each cycle of chemical cleaning was also used as a tool for the system comparison.

• 한국재료학회지
• /
• 제14권9호
• /
• pp.649-654
• /
• 2004

In this paper, the fracture toughness and mechanisms of failure in a random SiC-whisker/$Al_{2}O_3$ ceramic composite were investigated using in situ observations during mode I(opening) loading. $SiC_{w}/Al_{2}O_3$ composite was obtained by hot press sintering of $Al_{2}O_3$ powder and SiC whisker as the matrix and reinforcement, respectively. The whisker and powder were mixed using a turbo mill. The composite was produced at SiC whisker volume fraction of $0.3\%$. Compared with monolithic $Al_{2}O_3$, fracture toughness enhancement was observed in $SiC_{w}/Al_{2}O_3$ composite. This improved fracture toughness was attributed to SiC whisker bridging and crack deflection. $SiC_{w}/Al_{2}O_3$ composite exhibited typically brittle fracture behavior, but a fracture process zone was observed in this composite. This means that the load versus load-line displacement curve of $SiC_{w}/Al_{2}O_3$ composite from a fracture test may involve a small non-linear region near the peak load.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.474-478
• /
• 2006

It is becoming more significant to develop a rotary voice coil motor(VCM) type's actuator for small form factor (SFF) optical disk drive(ODD), as portables are getting more and more popularized nowadays. The actuator which is applicable to small-sized ODD with a compact flash(CF) II card size was developed and fabricated. The experimental results showed that the finite element(FE) model is different from the fabricated model. And so flexible mode frequencies did not satisfy specifications of small-sized ODD, and tuning. Tuning procedures were required to improve dynamic characteristics of the fabricated actuator through finite difference method(FDM). At first, design variables were extracted through parameter study and the tuned FE model was improved by design of experiment(DOE). Consequently, It was confirmed that the improved model was applicable to SFF ODD.

• 정보처리학회논문지C
• /
• 제8C권2호
• /
• pp.189-197
• /
• 2001

공안된 통신 언어인 SDL을 이용하여 시스템을 설계하고, SDL 개발 도구인 SDT를 이용하여 실행 가능한 소프트웨어를 개발하고 실제 타겟 시스템과 동일한 환경에서 개발된 기증을 검증하는 개발 순기를 모두 수용하는 시뮬레이터의 개발이 대규모의 복잡한 통신 프로토콜에서는 필요하다. 본 논문에서는 IMT-2000 무선 프로토콜의 한 엔티티인 계층 2의 무선 링크제어 프로토콜 엔티티 RLC-AM(Acknowledged mode)의 개발 및 검증을 위하여, RLC-AM을 설계 및 구현한 후 이의 실행화일을 호스트 상에서 수행시킬 수 있는 호스트 시뮬레이터를 개발하였다. 호스트 컴퓨터상에서 SDT 개발환경, 컴파일 환경 및 운영체제 환경을 연동하여 개발된 호스트 시뮬레이터는 대상 프로토콜 엔티티를 MAC등 타 엔티티로 바꾸어서도 같은 방식으로 수행할 수 있다.

• 한국소음진동공학회논문집
• /
• 제18권9호
• /
• pp.972-981
• /
• 2008

The blower which is installed in a FCEV(fuel cell electric vehicle) may cause noise due to misalignment and unbalance of mechanical components that rotate at high speed. One of the key points in efforts to minimize the noise radiation from a blower is the knowledge of the main radiating component and the relation between the surface vibration of a blower and the sound pressure. In this research, the blower model is developed based on FEM(finite element method). FE(finite element) model is reliable by correlation of frequencies and MAC(modal assurance criterion) values between EMA(experimental modal analysis) and FEA(finite element analysis). This model is applied to predict the vibration of a blower by using inverse force identification method and predict the radiating noise by using BEM(boundary element method). Comparing the frequencies of resonance and those mode shapes between EMA and FEA, a structural modification of the FE model is evaluated for reducing the parameters of the blower noise.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 학술대회 논문집 정보 및 제어부문
• /
• pp.536-537
• /
• 2008

최근 홈 네트워킹 기술과 연동된 가전제어 및 서비스에 대한니즈가 증대�� 있어 다양한 디지털 가전기기가 개발되고 있다. 특히 국내외적으로 많은 홈 네트워크 관련 제품들이 생산되고 있으며 이는 궁극적으로 이기종 네트워크 환경에서 유무선 통신의 구된 없이 다양한 기기를 네트워크에 접속할 수 있는 서비스를 제공한다. 기존 중 저속 전력선 모뎀의 경우 홈 네트워크에서 전력선으로 들어오는 신호를 수신하기 위해 전력소모가 가장 많은 Main Processor에서는 항상 Wake-On 상태를 유지하고 있다. 하지만 중 저속 전력선 모뎀의 송수신을 관장하는 Main Processor를 보게 되면 크게 통신 프로토콜을 관장하는 Main CPU와 실제 전력선 신호 송수신을 관장하는 PLC Core로 나뉠 수 있다. 홈네트워크상에 전력선으로 들어오는 신호를 수신하기 위해서는 PLC Core는 항상 Wake-On 상태를 유지해야 하지만 Main CPU의 경우는 전력소모를 최소화하기 위해 Idle 상태를 유지하더라도 Host Controller와의 Stand-by & Wake On 신호와 인터럽트 발생기능을 이용하게 되면 전력선 통신에 문제가 없이 대기모드를 지원하는 저전력 전력선 통신 모뎀 개발이 가능하다. 이에 본 연구에서는 저전력 대기모드를 지원하는 전력선 통신 모뎀 개발에 관한 연구를 하고자 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전력기술부문
• /
• pp.379-381
• /
• 2008

TETRA(Terrestrial Trunked Radio) is a digital trunked radio standard developed by the ETSI(European Telecommunications Standards Institute). Currently, TETRA was set Digital TRS in electric power If wireless backbone network. In this time, we use many company's TETRA modem. So, TETRA modem performance evaluation is very important. TETRA modem use two type of Data transfer mode. One is Packet Data using UDP/IP. and the other is SDS(Short Data Service). In this paper, We generate Packet Data using Traffic Generator module. Packet Data transfer 1000 times each 10 bytes to 400 bytes. We analyze transmission delay time, success rate and standard deviation.

• 전기학회논문지
• /
• 제62권7호
• /
• pp.1045-1052
• /
• 2013

In this study we deal with design procedures for the flywheel energy storage system that has the capacity to store the regenerative energy produced from the railway vehicles. The flywheel energy storage system (FESS) stores the regenerative electrical energy into the high speed rotational flywheel, by conversion the electrical energy into the mechanical rotational energy. Thus the FESS is composed of the energy conversion components, such as the motor and generator, mechanical support components, such as the rotational rotor, the magnetic bearings to support the rotor, and the digital controller to control the air gap between the rotor and the magnetic bearings. In this paper the design procedures for the rotor operating at the rigid mode and the magnetic bearings to support the rotational rotor without contact are presented.

• 한국산학기술학회논문지
• /
• 제14권2호
• /
• pp.919-926
• /
• 2013

신합리주의가 불러일으킨 도시와 유형의 관련성은 현대의 도시건축 디자인에 있어서 자주 제기되는 주제이며, 필수적인 개념이자 방법론으로 다루어지고 있다. 이에 본 연구는 형이상학적인 형태와 단일한 이미지로만 인식되고 다루어졌던 신합리주의 건축을 도시적 관점에서 살펴보고자 한다. 즉, 신합리주의 건축가들의 유형학적 건축이론 및 작품분석을 통해 도시와 건축의 해석개념을 고찰하고, 그에 따른 수용방식을 살펴봄으로써 신합리주의 건축의 도시 맥락적 특성을 파악하고자 하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 추계학술대회 논문집
• /
• pp.105-108
• /
• 2001

This paper compared a Modified C-dump converter and energy efficient converter topologies, derived from the conventional C-dump converter, for switched reluctance motor (SRM) drives. The proposed topologies overcome the limitations of the conventional C-dump converter, and could reduce the whole cost of the SRM drive. Also, the above converters have simple control requirements; and allow the motor phase current to freewheel during chopping mode. Specially, the voltage ratings of the dump capacitor and some of the switching devices in the proposed an Energy efficient C-dump converter is reduced to the supply voltage ($V_{dc}$) level compared to twice the supply voltage ($2V_{dc}$) in the conventional C-dump converter. Simulation and experimental results of the proposed converters are presented and verified.