• Applied Biological Chemistry
• /
• v.49 no.3
• /
• pp.192-195
• /
• 2006

For the development of a qualitative PCR detection method for genetically modified perilla (Perilla frutescens), perilla species-specific gene, KAS-I (Beta-ketoacyl-ACP synthase I), was selected and validated as suitable for the use as an endogenous reference gene in perilla. Primer specificity was first tested by the means of qualitative PCR analysis. The primer pair Pfru3-F/R amplifying the perilla endogenous gene, KAS-I, gave rise to an amplicon 95 bp. No amplified product was observed when DNA samples from 15 different plants were used as templates. Qualitative PCR detection method was assayed with vitamin E-enriched GM Perilla developed in Korea. For the qualitative PCR detection method, the construct-specific detection primer pairs were constructed. The primer pair TMTO-F/R amplifying the junction region of TMT (${\gamma}$-tocopherol methyltransferase) gene and OCS (Octopine synthase) terminator introduced in GM perilla gave rise to an amplicon 148 bp.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.11 no.3
• /
• pp.198-205
• /
• 2001

Many reactive dyes have been used in occupational settings without knowing their toxicity and health hazard information. To investigate the toxicity of reactive dye, C.I.No. Reactive Red 195 was exposed to male and female Sprague Dawley rats by inhalation for 28 days. The rats were exposed C.I.No. Reactive Red 195 for 6 hrs per day and 5days per week. The concentrations for the inhalation exposure were 0, 10, 40 and $160mg/m^3$. After 4 weeks of exposure, rats were examined for exposure related changes through pathology, blood biochemistry and hematology. There were no dose related changes including clinical signs, body weight and relative organ weight changes, hematological and biochemical and histopathological findings. The results indicate that no observed adverse effect level (NOAEL) of 28 days inhalatrion toxicity test for C.I.No. Reactive Red 195 was $160mg/m^3$.

• Journal of Korea Foundry Society
• /
• v.26 no.5
• /
• pp.222-226
• /
• 2006

Steel making slag has gained a considerable attraction as one candidate of eco-materials in research fields for recycling resources. Thus, many researches have been performed but were limited to development of substitute for cement being used in the construction field. A little research work also has been done on development of higher value-added materials, including heat resistant and sound absorbing materials. For this reason, the present study were focused on macrostructure characterization of fabricated slag fibers which are applicable to heat resistant materials. The slag fibers were fabricated through a modified melt extraction method. The processing variables employed were the wheel speed and molten slag temperature. The synthesized fibers were characterized by optical microscope and scanning electron microscopy. It was found that the wheel speed of 1400 rpm generated better quality of mineral fibers in terms of the relative amount of shot, diameter and length. This was attributed to the relative extent of contact width between the flowing melt and the rotating wheel. The thickness of the slag fibers also were decreased with increasing the slag melt temperature due mainly to significant decrease in the viscosity of the slag melt. In addition, the lower melt temperature caused an increase in number of shots plus the mineral fibers.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.7
• /
• pp.533-541
• /
• 1999

Multi-discharge type ozonizer(MDO) using superposed silent discharge has been designed and manufactured. It consists of three electrodes( central electrode, internal electrode, and external electrode ) and double gaps( gap between central electrode and internal electrode, gap between internal electrode and external electrode ). Therefore, ozone is generated by superposing silent discharges generated between the gaps respectively. And the MDO consists of three types of superposed discharge ozonizers according to voltage appling method for each electrode ; A.C. high voltages are applied two of three electrodes with phase difference of 180[˚], the other electrode is a ground. This paper describes that discharge and ozone generation characteristics of MDO which comprising central electrode and internal electrode applied A.C. high voltages with phase difference of 180[˚] respectively, and the grounded external electrode. As a result, the maximum ozone concentration, generation, and yield can be obtained 10208[ppm], 6.4[g/h], and 280[g/kwh] respectively.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.8
• /
• pp.63-70
• /
• 2002

In end milling process, the undeformed chip section area and cutting forces vary periodically with phase change of the tool. However the real undeformed chip section area deviates from the geometrically ideal one owing to cutter runout and tool shape error. In this study, a method of estimating the real undeformed chip section area which reflects cutter runout and tool shape error was presented in up end milling process using measured cutting forces. The average specific cutting resistance, Ka is defined as the main cutting force component divided by the modified chip section area. Ka value becomes smaller as the helix angle increases from $30^circC \;to\;40\circC$. But it becomes larger as the helix angle increases from $40^\circ$to 50 . On one hand, the Ka value shows a tendency to decrease with increase of the modified chip section area and this tendency becomes distinct with smaller helix angle.

• Journal of Korea Foundry Society
• /
• v.28 no.2
• /
• pp.79-84
• /
• 2008

Metal foam is one of the most interesting materials with various multi-functional properties such as light weight, energy absorption, high stiffness and damping capability. Among them, energy absorption property has keen interests in the field of automotives for passenger protection. Nowadays, researches about pore size and porosity control of the foam are increased to correspond them. However, though energy absorption properties are improved, these results are not cost-effective process. In present research, however, as a part of improving the energy absorption property of metallic foams, 606X aluminum alloy was used for cell wall material which has higher strength than pure aluminum. And its morphological features are characterized. As a results, porosity and pore size are uniformity distribution with increasing foaming temperature in the case of 6061 alloy foams. 6063 alloy foam specimens have opposite tendency because of the influence of alloying element and viscosity of the molten melt.

• Proceedings of the KIEE Conference
• /
• 1979.08a
• /
• pp.94-103
• /
• 1979

A 16-bit computer system, called X77, is designed and constructed using bit-slice micro-slice microprogrammable. A cross-assembler/simulator software has been implemented and used to debug the entire system design including actual microcodes prior to hardware realizations. Prototypes of X77 CPU, I/O processing subsystem and their interconnections have been constructed and are in the process of being debugged.

• Journal of Chest Surgery
• /
• v.17 no.2
• /
• pp.250-256
• /
• 1984

Eisenmenger syndrome is a condition which systemic arterial blood oxygen unsaturation occurs if obstruction in the pulmonary capillaries raises the pulmonary vascular resistance and pulmonary arterial pressure to or beyond systemic levels and then a significant right to left shunt develops across a preexisting cardiac septal defect or an aortopulmonary communication-We have experienced 3 cases of similar condition. Case I is 24 year old man who has had cyanosis and dyspnea on exertion since childhood. His pulmonary arterial pressure was 110/80mmHg. He was operated under diagnosis of the mitral stenosis and tetralogy of Fallot, but it was finally discovered that he had patent ductus arteriosus and ventricular defect was closed with perforated prosthetic patch, but the patient expired due to right heart failure low cardiac output. Case II was 16 year old female who had pulmonary hypertension of 110/85mmHg. She was diagnosed as Eisenmenger syndrome combining with atrial septal defect and patent ductus arteriosus. Case III was 20 year old male. His pulmonary arterial pressure was 110/70mmHg and the underlying defect was patent ductus arteriosus.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.04a
• /
• pp.892-895
• /
• 2017

본 논문에서는 비분할 비디오로부터 이 비디오에 담긴 사람의 행동을 효과적으로 탐지해내기 위한 심층 신경망 모델을 제안한다. 일반적으로 비디오에서 사람의 행동을 탐지해내는 작업은 크게 비디오에서 행동 탐지에 효과적인 특징들을 추출해내는 과정과 이 특징들을 토대로 비디오에 담긴 행동을 탐지해내는 과정을 포함한다. 본 논문에서는 특징 추출 과정과 행동 탐지 과정에 이용할 심층 신경망 모델을 제시한다. 특히 비디오로부터 각 행동별 시간적, 공간적 패턴을 잘 표현할 수 있는 특징들을 추출해내기 위해서는 C3D 및 I-ResNet 합성곱 신경망 모델을 이용하고, 시계열 특징 벡터들로부터 행동을 자동 판별해내기 위해서는 양방향 BI-LSTM 순환 신경망 모델을 이용한다. 대용량의 공개 벤치 마크 데이터 집합인 ActivityNet 비디오 데이터를 이용한 실험을 통해, 본 논문에서 제안하는 심층 신경망 모델의 성능과 효과를 확인할 수 있었다.

• Journal of Species Research
• /
• v.5 no.3
• /
• pp.324-332
• /
• 2016

Two feather mites, Zachvatkinia larica Mironov, 1989 and Ardeacarus ardeae (Canestrini, 1878) are reported for the first time in Korea. Specimens of Z. larica and A. ardeae were collected from the blacktailed gull Larus crassirostris and little egret Egretta garzetta, respectively. The genera Zachvatkinia Dubinin, 1949 and Ardeacarus Dubinin, 1951 are new to this country. Here, we provided morphological descriptions and illustrations of these two species. Additionally, we provide the partial sequences of the mitochondrial cytochrome c oxidase subunit I (COI) as DNA barcode markers.