• Journal of Sensor Science and Technology
• /
• v.8 no.5
• /
• pp.377-387
• /
• 1999

A piezoelectric flextentional deep-water sonar transducer has been designed using a coupled FE-HEM. The dynamics of the sonar transducer is modelled in three dimensions and is analyzed with external electrical excitation conditions. Different results are available such as steady-state frequency response for TX displacement modes, directivity patterns, resonance frequencies, TVRs. While the conventional barrel-stave typed sonar transducer of the piezoelectric material is designed, the external surface of the transducer is modified in order to allow the same hydrostatic pressure to be applied onto the inner and the outer surfaces of the transducer. With this modification for deep-water application, a new resonance mode is generated at lower frequency. This lower resonance mode can be adjusted according to the degree of the outer surface modification.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.3
• /
• pp.149-153
• /
• 2008

General underwater target detection methods adopt short-time FFT for estimate target doppler. This paper proposes the efficient target detection method, instead of conventional FFT, using approximate FFT for distributed sensor network target detection, which requires lighter computations. In the proposed method, we decrease computational rate of FFT by the quantization of received signal. For validation of the proposed method, experiment result which is applied to FFT based active sonar detector and real oceanic data is presented.

• Electrical & Electronic Materials
• /
• v.10 no.9
• /
• pp.916-921
• /
• 1997

In this study Characteristics of 3-D underwater object recognition independent of translation using the self-made ultrasonic sensor fabricated with porous piezoelectric resonator and presented. The sensor was satisfied with requirement of ultrasonic sensor. The recognition rates for the training data and the testing data are 97.45 and 91.25[%] respectively using the self-made ultrasonic sensor and SCL(Simple Competitive Learning) neural network. According to the experimental results It is believed that the self-made ultrasonic sensor can be applied as sensor of SONAR system.

• Journal of Ocean Engineering and Technology
• /
• v.18 no.4 s.59
• /
• pp.33-39
• /
• 2004

This paper presents a hybrid underwater navigation system for unmanned underwater vehicles, using an additional range sonar, where the navigation system is based on inertial and Doppler velocity sensors. Conventional underwater navigation systems are generally based on an inertial measurement unit (IMU) and a Doppler velocity log (DVL), accompanying a magnetic compass and a depth sensor. Although the conventional navigation systems update the bias errors of inertial sensors and the scale effects of DVL, the estimated position slowly drifts as time passes. This paper proposes a measurement model that uses the range sonar to improve the performance of the IMU-DVL navigation system, for extended operation of underwater vehicles. The proposed navigation model includes the bias errors of IMU, the scale effects of VL, and the bias error of the range sonar. An extended Kalman filter was adopted to propagate the error covariance, to update the measurement errors, and to correct the state equation, when the external measurements are available. To illustrate the effectiveness of the hybrid navigation system, simulations were conducted with the 6-d.o.f. equations of motion of an AUV in lawn-mowing survey mode.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.9
• /
• pp.362-369
• /
• 2012

Recently, a target detection based on a distributed sensor network has been much studied in active sonar. Zhou et al. proposed a target localization method using line fitting based on a distributed sensor network which consists of low complexity sensors that only report binary detection results. This method has three advantages relative to ML estimator. First, there is no need to estimate propagation model parameters. Second, the computation is simple. Third, it only use sensors with "detection", which implies less data to be collected by data processing center. However, this method has larger target localization error than the ML estimator. In this paper, a target localization method which modifies Zhou's method is proposed for reducing the localization error. The modified method shows the performance improvement that the target localization error is reduced by 40.7% to Zhou's method in the point of RMSE.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.4
• /
• pp.591-598
• /
• 2017

The changes of technology and the size of markets for unmaned aerial vehicle are getting bigger presently. Damage happens because of user's poor operation since accesses to the drones are easy. To minimize the damage, drone's stabilized flight skills are required, and controlling the motor to balanced speed is also needed. Thus, the essay shows that we use Arduino as a main control device for controlling a drone, and used acceleration sensor and gyro sensor for the drone stabilization. Also, we made it able to hover at a certain height by using a sonar sensor. We also controlled a drone by using an Android application, and made the drone hover stably at 0~2 meters.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.6
• /
• pp.697-703
• /
• 2009

Target Motion Analysis(TMA) means to detect target position, velocity and course for using passive sonar system with bearing-only measurement. In this paper, we apply the TMA algorithm for a submarine with Multi-Sensor Data Fusion(MSDF) and we will decide the best TMA algorithm for a submarine by a series of computer simulation runs.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.119-124
• /
• 1993

This paper describes a method of producing maps of an indoor environment with an autonomous mobile robot equipped with sonar array. This method uses the certainty grid suitable for accommodation of inaccurate sensor data and real-time navigation. Each grid contains a certainty vale that indicates the measure of confidence that an obstacle exists within th grid area. The scheduled firing method is used to eliminate the crosstalk between ultrasonic sensors. The effectiveness of the method is verified by a series of experiments.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.10 no.4
• /
• pp.281-286
• /
• 2010

We propose a space and time based sensor fusion method and a robust landmark detecting algorithm based on sensor fusion for mobile robot navigation. To fully utilize the information from the sensors, first, this paper proposes a new sensor-fusion technique where the data sets for the previous moments are properly transformed and fused into the current data sets to enable an accurate measurement. Exploration of an unknown environment is an important task for the new generation of mobile robots. The mobile robots may navigate by means of a number of monitoring systems such as the sonar-sensing system or the visual-sensing system. The newly proposed, STSF (Space and Time Sensor Fusion) scheme is applied to landmark recognition for mobile robot navigation in an unstructured environment as well as structured environment, and the experimental results demonstrate the performances of the landmark recognition.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.7
• /
• pp.324-325
• /
• 2001

In this study, the characteristics of ultrasonic sensor fabricated with PZT-Polymer 1-3 type composites are investigated. The 3-D Underwater object recognition using the self-made ultrasonic sensor and SOFM neural network is presented. The ultrasonic sensor is satisfied with the required condition of commercial ultrasonic sensor in underwater. The 3-D underwater object recognition for the training data and the testing data are 100[100%], respectively. The experimental results have shown that the ultrasonic sensor fabricated with PZT-Polymer 1-3 type composites can be applied for sonar system.