• 한국전기전자재료학회논문지
• /
• 제18권4호
• /
• pp.338-343
• /
• 2005

Pb(Zr,Ti)O₃[PZT] thin films were prepared on a highly (100) oriented LaNiO₃[LNO] and a randomly oriented LNO by sol-gel process. The PZT thin films on a highly (100) oriented LNO show a high (100) crystal orientation (F=100 ％), those on a randomly oriented LNO show a random crystal orientation (F=60 ％). All the PZT layer have a flat and dense microstructure with large columnar grains and their grain size are 25 nm. In the ferroelectric curves at electric field of 40 kV/cm, a highly (100) oriented PZT/LNO samples show coercive field, E/sub c/=10 kV/cm and remanent polarization, P/sub r/=14.5 μC/㎠, while a randomly oriented PZT/LNO sample show E/sub c/=10 kV/cm and P/sub r/=5.4 μC/㎠.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.732-734
• /
• 2003

A solvothermal synthetic method to $BaTiO_3$ nanoparticle has been investigated in toluene solution with $BaTi(OR)_6$ as precursor. A precursor prepared from barium metal with toluene, isopropanol and titanium isopropoxide was used as a starting material. Weight ratio of precursor to solvent prepared in the mixture are 5/100, 10/100, 20/100 and 50/100wt%. At the weight ratio of 50/100wt%, $BaTiO_3$ butterfly twin crystalline(${\fallingdotseq}100nm$) was obtained after synthesis at $250^{\circ}C$ for 20hrs in an autoclave. X-ray diffraction and transmission electron microscopy showed that the product of 50/100wt% has crystallization. At 5/100, 10/100, and 20/100wt%, however, red colloidal solution was obtained after synthesis and crystalline phase of $BaTiO_3$ was not produced.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.894-897
• /
• 2004

Sodum bismuth titanate $(Na_{0.5}Bi_{0.5}TiO_3$ or NBT) thin films coated on the $LaNiO_3$ (LNO) electrode by sol-gel methode and rapid thermal annealing (RTA) technique. The NBT (NBT/LNO/Si) thin films examined by x-ray diffraction (XRD). The orientation of NBT was observed for films coated at $900^{\circ}C$, 5 min and $600^{\circ}C$, 60 min. Filed emission scanning electron microscopy (FE-SEM) showed uniform surface composed of grains. The grain size of NBT thin films increased with increasing annealing temperature.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.675-678
• /
• 2004

[ $CuAlO_2$ ] was used as P-type transparent conducting oxide. $CuAlO_2$ ceramics was obtained from heating a stoichiometric mixture of $Cu_2O$ and $Al_2OH_3$ at $1200^{\circ}C$ for 6h. $CuAlO_2$ ceramics were doped by the rate of 0, 5, 7 and 10% of the $BeSO_4{\cdot}4H_2O$. Sintered ceramics were investigated by X-ray diffraction (XRD) and electrical measurements. The room temperature conductivity of the ceramics, which were doped with $BeSO_4{\cdot}4H_2O$ 5wt% was of the order of $3.19\times10^{-3}S\;cm^{-1}$, and the density was $4.98g/cm^3$. Therefor the conductivity and density in $BeSO+4{\cdot}4H_2O$ 5wt% were better than other cases. Additionally, Seebeck cofficient measurements revealed that these ceramics were p-type semiconductors and the ceramic conductivity increased with the growth temperature.

• 대한금속재료학회지
• /
• 제47권1호
• /
• pp.50-58
• /
• 2009

In this study, alumina matrix composites reinforced with carbon nanotubes (CNTs) were fabricated by ultrasonic dispersion, ball milling, mixing, compaction, and sintering processes, and their relative density, electrical resistance, hardness, flexure strength, and fracture toughness were evaluated. 0~3 vol.% of CNTs were relatively homogeneously dispersed in the composites in spite of the existence of some pores. The three-point bending test results indicated that the flexure strength increased with increasing volume fraction of CNTs, and reached the maximum when the CNT fraction was 1.5 vol.%. The fracture toughness increased as the CNT fraction increased, and the fracture toughness of the composite containing 3 vol.% of CNTs was higher by 40% than that of the monolithic alumina. According to observation of the crack propagation path after the indentation fracture test, a new toughening mechanism of grain interface bridging-induced CNT bridging was suggested to explain the improvement of fracture toughness in the alumina matrix composites reinforced with CNTs.

• Journal of Korean Neurosurgical Society
• /
• 제54권6호
• /
• pp.496-500
• /
• 2013

Objective : To evaluate the successful fusion rate in postmenopausal women with single-level anterior cervical discectomy and successful fusion (ACDF) and identify the significant factors related to bone successful fusion in pre- and postmenopausal women. Methods : From July 2004 to December 2010, 108 consecutive patients who underwent single-level ACDF were prospectively selected as candidates. Among these, the charts and radiological data of 39 women were reviewed retrospectively. These 39 women were divided into two groups : a premenopausal group (n=11) and a postmenopausal group (n=28). To evaluate the significant factors affecting the successful fusion rate, the following were analyzed : the presence of successful fusion, successful fusion type, age, operated level, bone mineral density, graft materials, stand-alone cage or plating with autologous iliac bone, subsidence, adjacent segment degeneration, smoking, diabetes mellitus, and renal disease. Results : The successful fusion rates of the pre- and postmenopausal groups were 90.9% and 89.2%, respectively. There was no significant difference in the successful fusion rate or successful fusion type between the two groups. In the postmenopausal group, three patients (10.8%) had successful fusion failure. In the postmenopausal group, age and subsidence significantly affected the successful fusion rate (p=0.016 and 0.011, respectively), and the incidence of subsidence in patients with a cage was higher than that in patients with a plate (p=0.030). Conclusion : Menopausal status did not significantly affect bone successful fusion in patients with single-level ACDF. However, in older women with single-level ACDF, the combination of use of a cage and subsidence may unfavorably affect successful fusion.

• Journal of Animal Science and Technology
• /
• 제51권5호
• /
• pp.421-426
• /
• 2009

본 연구는 산란계의 사육공간의 크기별 발성음의 특성을 파악하기 위해 하이라인브라운(Hy-Line Brown) 80주령의 산란계를 대상으로 2008년 10월부터 2009년 2월까지의 기간 동안 발성음을 수집 및 녹음하였다. 산란계의 사육 케이지는 무항생제 축산물 사육밀도조건을 만족하는 0.0231 $m^3$ (0.3m ${\times}$ 0.14m ${\times}$ 0.55m)을 개체당 사육공간의 기준(control)으로 하고, 좁은 공간(small, 0.21m ${\times}$ 0.14m ${\times}$ 0.55m)과 넓은 공간(large, 0.3m ${\times}$ 0.3m ${\times}$ 0.55m) 등의 3가지 유형으로 구분하였다. 하루 3회, 각각 1시간씩 디지털 녹음기(PMD-650, Marantz)와 마이크(MKH 416P48, RF Condenser Mic.)를 이용하여 발성음을 녹음하여 분석을 실시하였다. 발성음의 스펙트로그램을 비교한 결과 케이지의 크기별로 차이가 있는 것으로 나타났으며, 스펙트럼을 비교한 결과 역시 차이가 있었다. 또한 발성음의 주파수, 강도 및 길이 역시 통계적으로 유의한 차이를 나타내었다. 본 연구를 통해 산란계의 사육공간과 발성음 사이에는 깊은 관련이 있었으며, 사육공간에 의한 스트레스의 정도를 파악하기 위해 발성음은 매우 유용할 것으로 판단된다.

• Journal of Korean Neurosurgical Society
• /
• 제54권6호
• /
• pp.501-506
• /
• 2013

Objective : Spinal cord stimulation (SCS) is an effective means of treatment of chronic neuropathic pain from failed back surgery syndrome (FBSS). Because the success of trial stimulation is an essential part of SCS, we investigated factors associated with success of trial stimulation. Methods : Successful trial stimulation was possible in 26 of 44 patients (63.6%) who underwent insertion of electrodes for the treatment of chronic pain from FBSS. To investigate factors associated with successful trial stimulation, patients were classified into two groups (success and failure in trial). We investigated the following factors : age, sex, predominant pain areas (axial, limb, axial combined with limbs), number of operations, duration of preoperative pain, type of electrode (cylindrical/paddle), predominant type of pain (nociceptive, neuropathic, mixed), degree of sensory loss in painful areas, presence of motor weakness, and preoperative Visual Analogue Scale. Results : There were no significant differences between the two groups in terms of age, degree of pain, number of operations, and duration of pain (p>0.05). Univariate analysis revealed that the type of electrode and presence of severe sensory deficits were significantly associated with the success of trial stimulation (p<0.05). However, the remaining variable, sex, type of pain, main location of pain, degree of pain duration, degree of sensory loss, and presence of motor weakness, were not associated with the trial success of SCS for FBSS. Conclusion : Trial stimulation with paddle leads was more successful. If severe sensory deficits occur in the painful dermatomes in FBSS, trial stimulation were less effective.

• 환경영향평가
• /
• 제8권3호
• /
• pp.61-76
• /
• 1999

For the effective management of urban forest, a variety of informations on urban forest needs to be accurately measured and effectively used in decision-making processes. This study aims at developing an urban forest management system with reference to GIS and making it possible to effectively manage urban forests. A detailed forest type map were constructed with the help of aerial photograph and terrestrial inventory. A geographical map in terms of slope, aspect and altitude were also prepared by Digital Elevation Model(DEM). A soil type map containing chemical characteristics were also made through soil analysis. These thematic maps which contain informations on forest type, geography and soil were digitalized with reference to GIS, and an urban forest management system of user interface were developed. With the help of this urban forest management system, various spatial and attribute informations which need for urban forest management could be easily used in decision-making processes in relation to urban forest.

• Journal of Microbiology and Biotechnology
• /
• 제24권11호
• /
• pp.1574-1582
• /
• 2014

Bacteria recognize changes in their population density by sensing the concentration of signal molecules, N-acyl-homoserine lactones (AHLs). AHL-mediated quorum sensing (QS) plays a key role in biofilm formation, so the interference of QS, referred to as quorum quenching (QQ), has received a great deal of attention. A QQ strategy can be applied to membrane bioreactors (MBRs) for advanced wastewater treatment to control biofouling. To isolate QQ bacteria that can inhibit biofilm formation, we isolated diverse AHL-degrading bacteria from a laboratory-scale MBR and sludge from real wastewater treatment plants. A total of 225 AHL-degrading bacteria were isolated from the sludge sample by enrichment culture. Afipia sp., Acinetobacter sp. and Streptococcus sp. strains produced the intracellular QQ enzyme, whereas Pseudomonas sp., Micrococcus sp. and Staphylococcus sp. produced the extracellular QQ enzyme. In case of Microbacterium sp. and Rhodococcus sp., AHL-degrading activities were detected in the whole-cell assay and Rhodococcus sp. showed AHL-degrading activity in cell-free lysate as well. There has been no report for AHL-degrading capability in the case of Streptococcus sp. and Afipia sp. strains. Finally, inhibition of biofilm formation by isolated QQ bacteria or enzymes was observed on glass slides and 96-well microtiter plates using crystal violet staining. QQ strains or enzymes not only inhibited initial biofilm development but also reduced established biofilms.