• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XII)
• /
• pp.386-389
• /
• 2003

Pseudomonas savastanoi BCNU 106은 o-xylene 뿐만 아니라 m-, p-xylene을 분해할 수 있는 능력을 나타내었고, 비교적 높은 농도인 10 mM toluene, 2 mM o-xylene, 10 mM m-xylene, 10 mM p-xylene에서 높은 분해율을 보여주었다. Pseudomonas savastanoi BCNU 106의 resting cell을 이용하여 o-xylene의 중간대사산물을 GC-MS를 통하여 조사하였다. 주로 2-methylbenzyl alcohol, 2-methylbenzoic acid 등이 발견되었다.

• 한국염색가공학회지
• /
• 제18권4호
• /
• pp.28-36
• /
• 2006

The polyurethane prepolymers, which were previously synthesized from 2,4-toluene disocyanate(2,4-TDI) and polypropylene glycol(PPG), were chain extended by ethylene diamine or hydroxyl terminated polydimethylsiloxane(HTPMS) having hydroxy group at both ends of the chain, giving polyurethaneurea(PU) and polyurethane containing HTPMS segment(SiPU), respectively. In thermal gravimetric analysis, PU was almost completely degraded at $500^{circ}$ but SiPU showed about 11% residue at the same temperature. Suspension of SiPU and pigment showed more good compatibility than that of PU and pigment. The crocking fastness, migration fastness and solvent wicking were enhanced to 4.5 grades, 4 grades and 4 grades, respectively.

• 한국포장학회지
• /
• 제10권1호
• /
• pp.63-68
• /
• 2004

The regulations for migration amounts in USA, EU and Korea are investigated to compare the actual overall and specific migration date from plastic food packaging materials. Among the packaging materials regulated in above countries, printing ink solvents on packaging materials is used very widely and sometimes cause off-flavor in the food by migration of residual solvents. Even though migration of the residual solvents dose not generally cause safety problems in the contained food, it certainly can generate off-flavor and finally deteriorate quality of the finished product. Therefore regulation and development of analytical method for amount of residual ink solvents are very important issue in food industry. The headspace analytical method and tenax method for residual ink solvent on food packaging materials were evaluated from the accuracy, precise, swiftness and convenience of viewpoint. Headspace analytical method was selected and recommended for using in food industry field.

• 한국안전학회지
• /
• 제11권4호
• /
• pp.84-89
• /
• 1996

The Oxidation of aflatoxin $G_1$ ($AFG_1$) with ozone in chloroform solvent gave the stable ozonide into ozonization of the double bond in the terminal furan ring, and this reaction have been carried out for 3hr at -78. 5$^{\circ}C$. The chloroform solvent was removed in a stream of nitrogen and the residue was separated by elution chromatography(EC). The structure of this compound have been identified by using MS, $^1H-NMR$, $^l3C-NMR$ and I. R spectroscopy, respectively. This compound was formed the normal stable AFG$_1$-ozonide into spontaneous rearrangement after unstable ozonide according to sigmatropic rearrange ment dependent upon cyclo addition by ozone.

• 대한화학회지
• /
• 제11권1호
• /
• pp.17-21
• /
• 1967

For utilization of Bunker-C residual oil produced at KOCO., the auther tested the properties of vacuum fraction and blown asphalt, and as the result of it, (1) Vacuum fraction had so broad range of viscosity and high flash point that could be produced all kind of lublicating oil, but had to be dewaxed for high pour point, (2) Urea dewaxing was suitable to lighter fraction but not to heavier fraction, so, for heavier fraction, solvent dewaxing was needed. (3) Blown asphalt produced from vacuum residue had uniform relation between softening point and penetration in spite of broad change of blowing condition and adding of catalyst.

• Korean Chemical Engineering Research
• /
• 제55권3호
• /
• pp.358-362
• /
• 2017

커피침출 공정의 부산물인 커피박을 이용한 고부가가치 식품 및 화장품 소재 생산을 위해 열수추출 공정의 폴리페놀 추출인자(용매, 온도, 시간, 농도) 최적화를 수행하였다. 실험에 적용 된 모든 추출인자가 폴리페놀 생산에 유의한 효과가 있음을 확인할 수 있었고 NaOH 농도가 폴리페놀 생산에 미치는 효과가 가장 큰 것으로 평가되었다. 특히, 열수추출 보다는 산 또는 염기를 이용한 열수추출이 폴리페놀 추출 효과가 높았으며 NaOH 0.1 mol 첨가 시 증류수를 이용한 열수추출에 비해 1.5배 추출 효과가 증가하여 열수를 이용한 추출에 비해 염기-열수 추출이 보다 효과적임을 알 수 있었다. 폴리페놀 추출의 최적 조건인 $100^{\circ}C$, 2 mol NaOH와 30 min 추출 조건에서 36.5 mg GAE/g DM를 얻을 수 있었다. 이는 최적화 이전의 열수추출에서 얻은 12.5 mg GAE/g DM 대비 2.9배 증가된 결과로 커피박은 항산화 활성 등 기능성 강화 소재로 식품 및 화장품 산업에 활용이 가능할 것으로 판단된다.

• 한국연초학회지
• /
• 제36권1호
• /
• pp.26-33
• /
• 2014

Simultaneous determination of crop protection agents(CPAs) in food are done with multi-residue methods, which are composed of sample clean-up, concentration, chromatographic separation and detection. Stir Bar Sorptive Extraction(SBSE) technique is used for sample preparation of various analytes in several fields. The aim of this study was to develop a sensitive and fast method based on SBSE followed by thermal desorption - gas chromatography - mass spectrometry(TD - GC/MS) to determine CPAs in tobacco sample. For the analysis of tobacco sample prior to the SBSE method, solvent extraction or ultrasound-assisted solvent extraction was performed. methanol was used as the extraction solvent. The extract was then diluted with water. Finally, the sample was subjected to SBSE. A method for fast screening of crop protection agents in tobacco using SBSE-TD - GC/MS has been developed. About 17 CPAs including organochlorine, organophosphorous and others were identified and quantified. This method showed good linearity and high sensitivity for most of the target CPAs. The method was applied to the determination of CPAs at ng/mL levels in tobacco sample. This method is simple, rapid and may be applied in detection of other components.

• 분석과학
• /
• 제6권1호
• /
• pp.21-27
• /
• 1993

54% 순도의 공업용 n-헥산을 HPLC급으로 분리, 정제하였다. 분별증류법으로 분리하기 어려운 methylcyclopentane, 2-methylpentane, 그리고 3-methylpentane 등은 molecular aieve 5A를 이용한 액체-고체 크로마토그래피법으로 분리하였다. HPLC 용매로서 엄격히 규제받는 UV와 형광불순물은 알루미나와 실리카겔을 이용한 흡착법으로 정제하였다. 이와 같은 방법으로 n-헥산을 정제함으로써 수분, 색도(APHA), 산도, 증발잔류물, 황 및 thiophene 등의 불순물 항목을 모두 HPLC급의 규격까지 낮출 수 있었다.

• Nuclear Engineering and Technology
• /
• 제52권1호
• /
• pp.109-114
• /
• 2020

This work presents the results of laboratory scale tests of the CARBOFLUOREX (CARBOnate FLUORide EXtraction) process - a novel technology for the recovery of U and Pu from the solid fluorides residue (fluorination ash) of Fluoride Volatility Method (FVM) reprocessing of spent nuclear fuel (SNF). To study the oxidative leaching of U from the fluorination ash (FA) by Na₂CO₃ or Na₂CO₃-H₂O₂ solutions followed by solvent extraction by methyltrioctylammonium carbonate in toluene and purification of U from the fission products (FPs) impurities we used a surrogate of FA consisting of UF₄ or UO₂F₂, and FPs fluorides with stable isotopes of Ce, Zr, Sr, Ba, Cs, Fe, Cr, Ni, La, Nd, Pr, Sm. Purification factors of U from impurities at the solvent extraction refining stage reached the values of 10⁴-10⁵, and up to 10⁶ upon the completion of the processing cycle. Obtained results showed a high efficiency of the CARBOFLUOREX process for recovery and separating of U from FPs contained in FA, which allows completing of the FVM cycle with recovery of U and Pu from hardly processed FA.

• 공업화학
• /
• 제8권2호
• /
• pp.220-229
• /
• 1997

펜탄용매를 이용하여 상압잔사유로부터 고급 경질 탄화수소의 추출실험을 수행하였다. 추출공정 계산에 앞서 복잡한 혼합물로 구성된 상압잔사유의 진비점을 계산하기 위하여 모사증류방법을 이용하였다. 추출공정 계산절차를 간단히 하기 위하여 재분류 방법을 이용하여 많은 성분을 포함하고 있는 상압잔사유를 성상이 유사한 몇 개의 가상성분으로 분류하였다. 상압잔사유-펜탄계 추출공정의 모사는 등온 플래시 방법에 기초를 두고 있으며, 계산과정 중 기상과 액상에서의 퓨개시티 계수를 계산하기 위하여 Peng-Robinson 상태방정식을 이용하였다. 복잡한 계산과정을 포함하고 있는 추출공정 모사에 비하여 실험치는 계산치와 잘 일치 하였다.