• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2002년도 추계학술대회 발표 논문집
• /
• pp.20-26
• /
• 2002

The fluid flow, mass transfer, heat transfer and film thickness variation during the spin coating process are numerically studied. The model is said to be 1-dimensional because radial variations in film thickness, concentration and temperature are ignored. The finite difference method is employed to solve the equations that are simplified using the similarity transformation. In early time film thinning is due to the radial convective outflow. However that slows during the first seconds of spinning so the film thinning due to evaporation of solvent becomes sole. The time various film thickness is analyzed according to the var ious solvent fraction in the coating liquid and in the bulk of the overlying gas and the temperature variation in the liquid film during the spin coating is estimated.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.256-257
• /
• 2006

3D printing of NiTi alloys has been successfully achieved. A novel printing process has been developed and used, which consists in selective deposition of a solvent on a granule bed. The granules are composed of metal powders and thermoplastic binder, which are mixed and sieved by conventional methods. A sound green strength is obtained after solvent evaporation. Sintered parts exhibit good density, proper phase composition and shape memory behaviour.

• Archives of Pharmacal Research
• /
• 제27권1호
• /
• pp.1-12
• /
• 2004

Initial burst is one of the major challenges in protein-encapsulated microparticle systems. Since protein release during the initial stage depends mostly on the diffusional escape of the protein, major approaches to prevent the initial burst have focused on efficient encapsulation of the protein within the microparticles. For this reason, control of encapsulation efficiency and the extent of initial burst are based on common formulation parameters. The present article provides a literature review of the formulation parameters that are known to influence the two properties in the emulsion-solvent evaporation/extraction method. Physical and chemical properties of encapsulating polymers, solvent systems, polymer-drug interactions, and properties of the continuous phase are some of the influential variables. Most parameters affect encapsulation efficiency and initial burst by modifying solidification rate of the dispersed phase. In order to prevent many unfavorable events such as pore formation, drug loss, and drug migration that occur while the dispersed phase is in the semi-solid state, it is important to understand and optimize these variables.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2001년도 추계학술발표대회
• /
• pp.849-852
• /
• 2001

The preparation, characterization and drug release behaviour of hydrocortisone(HC) loaded levan acetate microparticles were investigated. Hydrophobic levan acetate was prepared by chemical modification of hydrophilic levan and micro particles were made by dialysis method or solvent evaporation method. The morphology of levan acetate was observed by SEM and drug release profiles were investigated at pH 7.4 and pH 1.2. Newly synthesised levan acetate can be used for carrier of drugs.

• 한국염색가공학회지
• /
• 제9권3호
• /
• pp.33-41
• /
• 1997

Polystyrene microcapsules were prepared by microencapsulation technique of solvent-evaporation. These microcapsules were characterized by Infrared spectroscopy, thermal analysis, scanning electron microscopy, and shape analysis. Fragrant water was used as a core material. Thermal and pH stabilities of polystyrene microcapsules were relatively excellent. And functional finishing on cotton fabric with microcapsules was applied.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 추계학술대회 논문집
• /
• pp.215-218
• /
• 1998

The thermal stability of polyaniline-camphorsulfonic acid(PANI-CSA) film was studied as a function of temperature and time. A decrease in electrical conductivity of PANI-CSA film occurred when PANI-CSA film is subjected to temperature above 60$^{\circ}C$. From the result of thermogravimetry (TG), it was thought that the deterioration in electrical conductivity of PANI-CSA film was due to evaporation of water and residual solvent.

• 한국염색가공학회지
• /
• 제10권2호
• /
• pp.29-36
• /
• 1998

Poly(L-lactide) microcapsules containing hydrophilic penetrate were prepared by interfacial precipitation method through solvent evaporation from w/o/w emulsion. Effect of four determinative process parameters on the particle size distributions, morphologies, and release properties of microcapsules coated with poly(L-lactide) was investigated. Moreover, susceptible functional cotton fabrics treated with the mentioned microcapsules were prepared and laundry test up to 15 times were done to determine fastness properties. As a result, the prepared poly(L-lactide) microcapsules with a more sharp-distributive, rounder, and more permeable membranes could be prepared by means of protective colloid concentration, solution volume and stirring rate.

• Advances in materials Research
• /
• 제2권4호
• /
• pp.195-208
• /
• 2013

A comprehensive theory of the spin coating technique has been reviewed and the basic principles and parameters controlling the process are clearly highlighted, which include spin speed, spin time, acceleration and fume exhaust. The process generally involves four stages: a dispense stage, substrate acceleration stage, a stage of substrate spinning at a constant rate and fluid viscous forces dominate fluid thinning behaviour and a stage of substrate spinning at a constant rate and solvent evaporation dominates the coating thinning behaviour. The study also considered some common thin film defects associated with this technique, which include comet, striation, chucks marks environmental sensitivity and edge effect and possible remedies.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2-2
• /
• pp.230.1-230.1
• /
• 2003

In case of oral application of quinupramine, antidepressants, it may cause adverse effects such as diarrhea, nausea due to transient high blood concentration. Ethylene vinyl acetate (EVA) which is heat-processible, flexible, inexpensive material was used for transdermal drug delivery. The purpose of this study was to develop the new transdermal delivery system of quinupramine using EVA polymer matrix that can provide sustained release and avoid the side effects. The EVA matrix containing quinupramine was prepared by solvent-evaporation method. (omitted)

• 분석과학
• /
• 제6권1호
• /
• pp.21-27
• /
• 1993

54% 순도의 공업용 n-헥산을 HPLC급으로 분리, 정제하였다. 분별증류법으로 분리하기 어려운 methylcyclopentane, 2-methylpentane, 그리고 3-methylpentane 등은 molecular aieve 5A를 이용한 액체-고체 크로마토그래피법으로 분리하였다. HPLC 용매로서 엄격히 규제받는 UV와 형광불순물은 알루미나와 실리카겔을 이용한 흡착법으로 정제하였다. 이와 같은 방법으로 n-헥산을 정제함으로써 수분, 색도(APHA), 산도, 증발잔류물, 황 및 thiophene 등의 불순물 항목을 모두 HPLC급의 규격까지 낮출 수 있었다.