• Polymer(Korea)
• /
• v.35 no.5
• /
• pp.424-430
• /
• 2011

Biodegradable poly[(glycine ethyl ester)-(phenylalanine ethyl ester) phosphazene](PGPP) microparticles were fabricated by electrohydrodynamic atomization to apply drug release test. Atomization parameters such as applied voltage, polymer concentration, and molecular weight were investigated to inspect their effects on the size and morphology of microparticles. The average diameter of PGPP microparticles decreased as increasing applied voltage and solution flow rate. Dichloromethane/dioxane mixture shows better results for the preparation of microparticles than single solvent owing to the different PGPP solubility in solvent. Blending PGPP polymers with proper molecular weights not only favored the production of spherical PGPP microparticles via electrohydrodynamic atomization, but also provided a way to adjust drug (rifampicin) release behavior. Drug-loaded biodegradable polyphosphazene microspheres can be fabricated via electrohydrodynamic atomization, which has potential use in biomedical applications.

• Journal of the Korean Chemical Society
• /
• v.38 no.8
• /
• pp.552-561
• /
• 1994

The cis → trans thermal isomerization of azobenzene derivatives has been studied. A sizable solvent effect on the rates for thermal isomerization of push-pull azobenzenes are observed. It is suggested that the isomerization proceeds via a rotational mechanism. For non push-pull azobenzenes, the lack of solvent effects on the rate of isomerization was observed. This suggests that the isomerization proceeds via an inversional mechanism for non push-pull azobenzenes.

• Journal of Integrative Natural Science
• /
• v.10 no.1
• /
• pp.43-50
• /
• 2017

Synthetic resins were combined 1-aza-12-crown-4 macrocyclic ligand with styrene divinylbenzene copolymer having 1%, 2%, 8%, and 16% crosslink by a substitution reaction. These synthetic resins were confirmed by chlorine content, elementary analysis, SEM, surface area, and IR-spectrum. As the results of the effects of pH, crosslink of synthetic resin, and dielectric constant of a solvent on metal ion adsorption for resin adsorbent, the metal ions showed high adsorption at pH 3 or over. Adsorption selectivity for the resin in ethanol solvent was the order of uranium ($UO_2{^{2+}}$) > cobalt ($Co^{2+}$) > dysprosium ($Dy^{3+}$) ion, adsorbability of the metal ion was the crosslink in order of 1%, 2%, 8%, and 16% and it was increased with the lower dielectric constant. In addition, theses metal ions could be separated in the column with 1% crosslink resin by using nitric acid (pH 2.0) as an eluent.

• Journal of the Korean Ceramic Society
• /
• v.28 no.1
• /
• pp.60-66
• /
• 1991

The polymeric alumina sol was prepared by partial hydrolysis of aluminum sec-butoxide reacted with acetylacetone and its characteristics was investigated. The effects of alcohol solvent, acetylacetone, and acid concentration to the sol were investigated. FT-IR and Al27-MASNMR were used to study hydrolysis and polymerization reaction of aluminum complex. Synthesized sol showed the characteristics of polymeric alumina sol. To make a clear polymeric alumina sol, the optimum contents of acetylacetone, H2O and alcohol solvent were 0.4-0.6 mole, 0.25-1.25 mole, 3-5 mole per one mole alkoxide respectively. As a result of the Al27-MASNMR analysis, it was noted that hexa-penta-coordinated Al were main structure.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.9
• /
• pp.1747-1751
• /
• 2008

Reactions of n-propyl fluoroformate in a variety of pure and binary solvents have been studied at 40.0 {^{\circ}C}. The extended (two-term) Grunwald-Winstein equation has been applied to the specific rates of solvolysis of npropyl fluoroformate. The sensitivities (l = 1.80 ${\pm}$ 0.17 and m = 0.96 ${\pm}$ 0.10) to changes in solvent nucleophilicity and solvent ionizing power and the $k_F/k_{Cl}$ values are similar to those for solvolyses of n-octyl fluoroformate over the full range of solvents, suggesting that the addition step of an addition-elimination mechanism is ratedetermining. These observations are also compared with those previously reported for the corresponding chloroformate and fluoroformate esters.

• Journal of Integrative Natural Science
• /
• v.6 no.2
• /
• pp.104-110
• /
• 2013

1-Aza-12-crown-4 macrocyclic ligand was combined with styrene (2th petroleum in 4th class hazardous materials) divinylbenzene copolymer having 1%, 2%, 3%, and 6% crosslinks by a substitution reaction, in order to synthesize resin. These synthetic resins were confirmed by chlorine content, elementary analysis and IR-spectrum. As the results of the effects of pH, equilibrium arrival time, crosslink of synthetic resin, and dielectric constant of a solvent on uranium ion adsorption for resin adsorbent, the uranium ion showed high adsorption at pH 3 or over and adsorption equilibrium of uranium ion was about 2 hours. In addition, adsorption selectivity for the resin in methanol solvent was the order of uranium ($UO_2{^{2+}}$) > iron ($Fe^{3+}$) > lutetium ($Lu^{3+}$) ions, adsorbability of the uranium ion was in the crosslinks order of 1%, 2%, 3%, and 6% was increased with the lower dielectric constant.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.10a
• /
• pp.152-152
• /
• 2009

유기태양전지 Solvent인 1-2-Dichlorobenzene(DCB)에 1-Bromonaphtalene(BN)을 첨가하여 Air분위기에서 ZnO film을 이용한 유/무기 복합 태양전지를 만들었다. 셀의 구조는 ITO/ZnO nanofilm/Poly(3-hexylthiophene(P3HT):[6,6]-Phenyl C60-Butyric acid methyl ester(PCBM)/PEDOT:PSS/Ag로 제작했다. 두께 70nm ZnO film은 전기화학적 방법으로 ITO위에 전착하였다. AM1.5조건에서 Solar simulator로 측정한 결과 BN을 첨가한 셀에서 Jsc값이 증가되었다. Jsc값의 증가는 BN이 결정화를 향상시켜 효율이 증가됨을 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.1
• /
• pp.53-58
• /
• 1995

Heats of solution of aniline (AN), benzylamine (BA), ethyl-(EBS) and 2-phenylethyl benzenesulfonates (PEB) are calorimetrically measured in acetonitrile-methanol mixtures at 25.0 $^{\circ}C$. The activation parameters, ${\Delta}H^{\neq}$, ${\Delta}S^{\neq}$ and ${\Delta}G^{\neq}$, are determined for the reactions of EBS and PEB with AN and BA using the kinetic data at three temperatures. Calorimetric transfer enthalpies of initial state, ${\delta}H_t^{0{\rightarrow}x})$(IS), and kinetically derived activation enthalpies, ${\delta}\;{\Delta}H^{\neq}$, in the MeCN-MeOH mixtures are combined to determine the transfer enthalpies of transition state, ${\delta}H_t^{0{\rightarrow}x})$(TS); ${\delta}H_t^{0{\rightarrow}x})$(IS) = ${\delta}{\Delta}H^{\neq}\;+\;{\delta}H_t^{0{\rightarrow}x}$(IS) The preferential solvation of anionic charge in the TS predicts a loose TS with a greater degree of bond cleavage for the reactions of PEB than for EBS, and also for the reactions with BA compared to the reactions with AN.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.2
• /
• pp.128-131
• /
• 1996

From Raman spectra, the ${\nu}g$C=O frequencies of 4-substituted benzaldehydes were found to correlate with the ${\sigma}_p$ values of the 4-x atom or group as well as the acceptor number (AN) values of solvents. In various solvents, the ${\nu}g$C=O frequency of benzaldehyde decreased upon the increase of benzaldehyde concentration. This shift was mainly due to the hydrogen bonding between the carbonyl oxygen and/or aldehydic proton of benzaldehyde and the solvent molecules. Over the 1-80 volume % change, the ${\nu}g$C=O frequency of benzaldehyde down shifted from 1709.4 $cm^{-1}$ to 1700.2 $cm^{-1}$ in CCl4 solution and from 1703.0 $cm^{-1}$ to 1698.0 $cm^{-1}$ in $C_2H_5OH$ solution. This is due to the fact that hydrogen bonding between the benzaldehyde and C2H5OH was much stronger than that between the benzaldehyde and the other solvents.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.8
• /
• pp.842-846
• /
• 2001

Solvolyses of N-methyl-N-phenylcarbamoyl chlorides in aqueous binary mixtures of acetone, ethanol, methanol and in water, D2O, and 50% D2O-CH3OD are investigated at 25.0 $^{\circ}C.$ The Grunwald-Winstein plots of first-ord er rate constants for N-methyl-N-phenylcarbamoyl chlorides with YCl (based on 2-adamantyl chloride) show a dispersion phenomenon. The ring parameter (I) has been shown to give considerable improvement when it is added as an hI term to the original Grunwald-Winstein and extended Grunwald-Winstein correlations for the solvolyses of N-methyl-N-phenylcarbamoyl chlorides. This study has shown that the magnitude of l, m and h values associated with a change of solvent composition is able to predict the dissociative SN2 transition state. The kinetic solvent isotope effects determined in deuterated water are consistent with the proposed mechanism of the general base catalyzed and/or a dissociative SN2 mechanism channel for N-methyl-N-phenylcarbamoyl chlorides solvolyses.