• 제목/요약/키워드: Solvent Free Synthesis

검색결과 120건 처리시간 0.023초

액체 이산화탄소 이용한 Monasil PCA 추출에 대한 연구 (A Study on the Extraction of Monasil PCA using Liquid CO2)

  • 조동우;오경실;배원;김화용;이갑수
    • Korean Chemical Engineering Research
    • /
    • 제50권4호
    • /
    • pp.684-689
    • /
    • 2012
  • Poly(acrylic acid) (PAA) 구형 입자는 바이오 분야의 소재에서부터 전자 재료에 이르기까지 다양한 분야에 사용되는 고분자 물질이다. 이를 생산하기 위해서는, 분산제(surfactant)를 이용한 중합 방법으로 합성을 한 후, 사용한 분산제를 제거하기 위한 별도의 Purification 과정을 거치게 된다. 일반 유기 용매를 사용하면 막대한 폐수 발생, 별도의 분리 공정 추가, 잔류 용매의 가능성 등의 문제점이 발생한다. 이에 이러한 문제를 해결하고자, 액체 이산화탄소를 용매로 하여, high-pressure Soxhlet extraction 방법을 개발하였다. 본 연구에서는 compressed liquid dimethyl ether (DME) 상에서 PAA 분산 중합에 사용된 pyrrolidene carboxylic acid-g-poly (siloxane) 계열의 분산제, Monasil PCA 제거하는 연구를 진행하였다. 추출된 PAA 입자의 모양은 field emission scanning electron microscopy (FE-SEM)으로 확인을 하였고, Monasil PCA의 농도는 Inductively Coupled Plasma-Optical Emission Spectrometer (ICP-OES)로 분석하였다. 용매의 효과를 비교하기 위해서, 액체 이산화탄소와 n-hexane과 liquid DME를 대상으로 추출 실험을 하였다. 그 결과 n-hexane의 경우 일부 정제된 PAA 구형 입자를 얻을 수 있었지만, 일부는 n-hexane 증기의 높은 열에 의해서 변형된 형태의 입자를 얻었다. Liquid DME의 경우엔, 추출이 잘 되지 않았다. 액체 $CO_2$를 이용하는 경우에 구형의 형태는 유지하면서 분산제가 제거된 입자를 얻을 수 있었다. 그리고 최적 운전 조건을 알기 위해서 8시간 동안 재비기와 응축기의 온도를 달리하면서 실험을 실시하였다. 그 결과 추출기의 온도가 $19.6{\pm}0.2^{\circ}C$, 압력이 $51.5{\pm}0.5$ bar일 때, 가장 좋은 제거 효율을 보였다.

Solution-Processed Nontoxic and Abundant $Cu_2ZnSnS_4$ for Thin-Film Solar Cells

  • 문주호
    • 한국재료학회:학술대회논문집
    • /
    • 한국재료학회 2012년도 춘계학술발표대회
    • /
    • pp.65-65
    • /
    • 2012
  • Copper zinc tin sulfide ($Cu_2ZnSnS_4$, CZTS) is a very promising material as a low cost absorber alternative to other chalcopyrite-type semiconductors based on Ga or In because of the abundant and economical elements. In addition, CZTS has a band-gap energy of 1.4~1.5eV and large absorption coefficient over ${\sim}10^4cm^{-1}$, which is similar to those of $Cu(In,Ga)Se_2$(CIGS) regarded as one of the most successful absorber materials for high efficient solar cell. Most previous works on the fabrication of CZTS thin films were based on the vacuum deposition such as thermal evaporation and RF magnetron sputtering. Although the vacuum deposition has been widely adopted, it is quite expensive and complicated. In this regard, the solution processes such as sol-gel method, nanocrystal dispersion and hybrid slurry method have been developed for easy and cost-effective fabrication of CZTS film. Among these methods, the hybrid slurry method is favorable to make high crystalline and dense absorber layer. However, this method has the demerit using the toxic and explosive hydrazine solvent, which has severe limitation for common use. With these considerations, it is highly desirable to develop a robust, easily scalable and relatively safe solution-based process for the fabrication of a high quality CZTS absorber layer. Here, we demonstrate the fabrication of a high quality CZTS absorber layer with a thickness of 1.5~2.0 ${\mu}m$ and micrometer-scaled grains using two different non-vacuum approaches. The first solution-processing approach includes air-stable non-toxic solvent-based inks in which the commercially available precursor nanoparticles are dispersed in ethanol. Our readily achievable air-stable precursor ink, without the involvement of complex particle synthesis, high toxic solvents, or organic additives, facilitates a convenient method to fabricate a high quality CZTS absorber layer with uniform surface composition and across the film depth when annealed at $530^{\circ}C$. The conversion efficiency and fill factor for the non-toxic ink based solar cells are 5.14% and 52.8%, respectively. The other method is based on the nanocrystal dispersions that are a key ingredient in the deposition of thermally annealed absorber layers. We report a facile synthetic method to produce phase-pure CZTS nanocrystals capped with less toxic and more easily removable ligands. The resulting CZTS nanoparticle dispersion enables us to fabricate uniform, crack-free absorber layer onto Mo-coated soda-lime glass at $500^{\circ}C$, which exhibits a robust and reproducible photovoltaic response. Our simple and less-toxic approach for the fabrication of CZTS layer, reported here, will be the first step in realizing the low-cost solution-processed CZTS solar cell with high efficiency.

  • PDF

신규 화장품용 천연유래 보존제의 물성 측정, 용액 거동 및 보존제 포함 화장품의 제형 안정성 (Basic Properties and Solution Behavior of New Naturally Derived Cosmetic Preservative, and Stability of Cosmetic Formulation)

  • 신수빈;박정은;고나연;김미정;신혜원;이다솜;김나래;엄태식;정국인;배준원
    • 공업화학
    • /
    • 제35권2호
    • /
    • pp.122-127
    • /
    • 2024
  • 화장품 보존제는 화장품의 유효 사용 기간에 매우 중요한 성분으로, 최근에는 저독성 자연유래 화장품 보존제에 대한 관심이 급증하고 있다. 본 연구에서는 기존 다이올(diol) 계통 보존제를 대체할 수 있으며 천연유래 성분으로부터 얻어진 신규 보존제(laurimino bispropanediol, LB)의 기초적인 물성을 측정하고 신규 보존제를 포함한 수용액을 제조하여 용액 거동을 고찰하였다. 특히, 신규 보존제의 수용액에서의 micelle 형성 가능성을 pyrene 분자를 이용한 실험법으로 고찰하였다. 이를 통해 신규 보존제는 상대적으로 긴 소수성 탄화수소와 늘어난 하이드록실 그룹(hydroxyl group)으로 인해 micelle 형성이 가능함을 추론할 수 있었다. 보존제의 제형 속에서의 성능을 검증하기 위해 유화력 테스트를 수행하였으며, 유기용매와 유지 성분에 대해 유화력을 지님을 확인할 수 있었다. 추가로, 점도가 상대적으로 낮은 에센스 및 비교적 점도가 높은 로션 제형에 도입하였을 때 제형의 분산 안정성이 확보됨을 파악할 수 있었다. 본 연구는 향후 새로운 저독성 천연유래 화장품 보존제의 개발 및 사용에 중요한 정보를 제공할 것이다.

Sesquiterpenoids Bioconversion Analysis by Wood Rot Fungi

  • Lee, Su-Yeon;Ryu, Sun-Hwa;Choi, In-Gyu;Kim, Myungkil
    • 한국균학회소식:학술대회논문집
    • /
    • 한국균학회 2016년도 춘계학술대회 및 임시총회
    • /
    • pp.19-20
    • /
    • 2016
  • Sesquiterpenoids are defined as $C_{15}$ compounds derived from farnesyl pyrophosphate (FPP), and their complex structures are found in the tissue of many diverse plants (Degenhardt et al. 2009). FPP's long chain length and additional double bond enables its conversion to a huge range of mono-, di-, and tri-cyclic structures. A number of cyclic sesquiterpenes with alcohol, aldehyde, and ketone derivatives have key biological and medicinal properties (Fraga 1999). Fungi, such as the wood-rotting Polyporus brumalis, are excellent sources of pharmaceutically interesting natural products such as sesquiterpenoids. In this study, we investigated the biosynthesis of P. brumalis sesquiterpenoids on modified medium. Fungal suspensions of 11 white rot species were inoculated in modified medium containing $C_6H_{12}O_6$, $C_4H_{12}N_2O_6$, $KH_2PO_4$, $MgSO_4$, and $CaCl_2$ for 20 days. Cultivation was stopped by solvent extraction via separation of the mycelium. The metabolites were identified as follows: propionic acid (1), mevalonic acid lactone (2), ${\beta}$-eudesmane (3), and ${\beta}$-eudesmol (4), respectively (Figure 1). The main peaks of ${\beta}$-eudesmane and ${\beta}$-eudesmol, which were indicative of sesquiterpene structures, were consistently detected for 5, 7, 12, and 15 days These results demonstrated the existence of terpene metabolism in the mycelium of P. brumalis. Polyporus spp. are known to generate flavor components such as methyl 2,4-dihydroxy-3,6-dimethyl benzoate; 2-hydroxy-4-methoxy-6-methyl benzoic acid; 3-hydroxy-5-methyl phenol; and 3-methoxy-2,5-dimethyl phenol in submerged cultures (Hoffmann and Esser 1978). Drimanes of sesquiterpenes were reported as metabolites from P. arcularius and shown to exhibit antimicrobial activity against Gram-positive bacteria such as Staphylococcus aureus (Fleck et al. 1996). The main metabolites of P. brumalis, ${\beta}$-Eudesmol and ${\beta}$-eudesmane, were categorized as eudesmane-type sesquiterpene structures. The eudesmane skeleton could be biosynthesized from FPP-derived IPP, and approximately 1,000 structures have been identified in plants as essential oils. The biosynthesis of eudesmol from P. brumalis may thus be an important tool for the production of useful natural compounds as presumed from its identified potent bioactivity in plants. Essential oils comprising eudesmane-type sesquiterpenoids have been previously and extensively researched (Wu et al. 2006). ${\beta}$-Eudesmol is a well-known and important eudesmane alcohol with an anticholinergic effect in the vascular endothelium (Tsuneki et al. 2005). Additionally, recent studies demonstrated that ${\beta}$-eudesmol acts as a channel blocker for nicotinic acetylcholine receptors at the neuromuscular junction, and it can inhibit angiogenesis in vitro and in vivo by blocking the mitogen-activated protein kinase (MAPK) signaling pathway (Seo et al. 2011). Variation of nutrients was conducted to determine an optimum condition for the biosynthesis of sesquiterpenes by P. brumalis. Genes encoding terpene synthases, which are crucial to the terpene synthesis pathway, generally respond to environmental factors such as pH, temperature, and available nutrients (Hoffmeister and Keller 2007, Yu and Keller 2005). Calvo et al. described the effect of major nutrients, carbon and nitrogen, on the synthesis of secondary metabolites (Calvo et al. 2002). P. brumalis did not prefer to synthesize sesquiterpenes under all growth conditions. Results of differences in metabolites observed in P. brumalis grown in PDB and modified medium highlighted the potential effect inorganic sources such as $C_4H_{12}N_2O_6$, $KH_2PO_4$, $MgSO_4$, and $CaCl_2$ on sesquiterpene synthesis. ${\beta}$-eudesmol was apparent during cultivation except for when P. brumalis was grown on $MgSO_4$-free medium. These results demonstrated that $MgSO_4$ can specifically control the biosynthesis of ${\beta}$-eudesmol. Magnesium has been reported as a cofactor that binds to sesquiterpene synthase (Agger et al. 2008). Specifically, the $Mg^{2+}$ ions bind to two conserved metal-binding motifs. These metal ions complex to the substrate pyrophosphate, thereby promoting the ionization of the leaving groups of FPP and resulting in the generation of a highly reactive allylic cation. Effect of magnesium source on the sesquiterpene biosynthesis was also identified via analysis of the concentration of total carbohydrates. Our current study offered further insight that fungal sesquiterpene biosynthesis can be controlled by nutrients. To profile the metabolites of P. brumalis, the cultures were extracted based on the growth curve. Despite metabolites produced during mycelia growth, there was difficulty in detecting significant changes in metabolite production, especially those at low concentrations. These compounds may be of interest in understanding their synthetic mechanisms in P. brumalis. The synthesis of terpene compounds began during the growth phase at day 9. Sesquiterpene synthesis occurred after growth was complete. At day 9, drimenol, farnesol, and mevalonic lactone (or mevalonic acid lactone) were identified. Mevalonic acid lactone is the precursor of the mevalonic pathway, and particularly, it is a precursor for a number of biologically important lipids, including cholesterol hormones (Buckley et al. 2002). Farnesol is the precursor of sesquiterpenoids. Drimenol compounds, bi-cyclic-sesquiterpene alcohols, can be synthesized from trans-trans farnesol via cyclization and rearrangement (Polovinka et al. 1994). They have also been identified in the basidiomycota Lentinus lepideus as secondary metabolites. After 12 days in the growth phase, ${\beta}$-elemene caryophyllene, ${\delta}$-cadiene, and eudesmane were detected with ${\beta}$-eudesmol. The data showed the synthesis of sesquiterpene hydrocarbons with bi-cyclic structures. These compounds can be synthesized from FPP by cyclization. Cyclic terpenoids are synthesized through the formation of a carbon skeleton from linear precursors by terpene cyclase, which is followed by chemical modification by oxidation, reduction, methylation, etc. Sesquiterpene cyclase is a key branch-point enzyme that catalyzes the complex intermolecular cyclization of the linear prenyl diphosphate into cyclic hydrocarbons (Toyomasu et al. 2007). After 20 days in stationary phase, the oxygenated structures eudesmol, elemol, and caryophyllene oxide were detected. Thus, after growth, sesquiterpenes were identified. Per these results, we showed that terpene metabolism in wood-rotting fungi occurs in the stationary phase. We also showed that such metabolism can be controlled by magnesium supplementation in the growth medium. In conclusion, we identified P. brumalis as a wood-rotting fungus that can produce sesquiterpenes. To mechanistically understand eudesmane-type sesquiterpene biosynthesis in P. brumalis, further research into the genes regulating the dynamics of such biosynthesis is warranted.

  • PDF

죽황(竹黃)으로부터 분리한 미백활성 성분의 멜라닌생성 억제효과 (The Antimelanogenic Effects of Compounds Extracted from Bamboo Inner Film)

  • 이기무;이은창;조순장;문석식
    • 대한화장품학회지
    • /
    • 제34권4호
    • /
    • pp.287-301
    • /
    • 2008
  • 천연물로부터 미백활성 성분의 개발을 위하여 국내 자생식물 60종으로부터 추출물을 얻어, 이들의 멜라닌 생성과정의 주된 효소인 tyrosinase 활성 억제력을 평가하였다. 평가결과 노랑하늘타리(열매), 죽황, 누리장나무(잎), 우산고로쇠(잎) 추출물이 비교적 높은 tyrosinase 활성억제효과를 보였고, 이들의 $IC_{50}$ 값은 $50{\sim}100{\mu}g/mL$ 이었다. 이들의 멜라닌생성 억제효과를 B16F10 흑색종세포주를 이용하여 실험한 결과, 죽황추출물이 가장 높은 52%의 멜라닌생성 저해활성을 보였으며, 이는 기존 미백제인 arbutin (42%)에 비해 10% 높은 것이다. 죽황추출물로부터 용매추출 및 크로마토그래피 등의 분리과정을 거쳐 10가지 미백활성 성분을 분리하였다. 이들은 모두 페놀유도체 화합물로서, SM701과 SM702, SM703, BPR211은 hydroquinone계 화합물이며, SM707은 gallic acid계, SM704와 SM705, SM706, SM708, SM709는 ferulic acid계로 확인되었다. 이들의 유리기 소거효과를 hydorquinone과 비타민 C와 비교하여 측정하였을 때. $SC_{50}$ 값이 SM702와 SM709의 경우 $60{\sim}70{\mu}M$로 hydroquinone과 유사하였고, SM701과 SM708은 $30{\sim}40{\mu}M$로 비타민 C ($45{\mu}M$)보다 낮은 값을 보여 죽황추출물은 항산화활성이 높은 성분들을 함유하고 있음을 확인하였다. 이들 중 1,2-O-diferulylglycerol로 확인된 SM709 성분은 tyrosine hydroxylase 및 DOPA oxidase 활성을 각각 18, 60% 억제하였고, B16F10 흑색종세포주를 이용한 멜라닌생성량 억제시험에서 62%의 저해효과를 나타내 가장 높은 미백활성을 보였다. 따라서 죽황추출물의 미백활성은 주로 멜라닌 생성과정의 DOPA oxidsae 저해효과와 항산화효과에 의해 나타나는 것으로 생각된다.

우주항공의 신소재를 위한 New Austria Tunnel Method 수지합성에 대한 Fume silica의 영향 (Effects of Fume silica on synthesis of New Austria Tunnel Method Resin for new material in space aviation)

  • 김기준;이주호;박태술;이주엽
    • 한국응용과학기술학회지
    • /
    • 제31권4호
    • /
    • pp.595-601
    • /
    • 2014
  • NATM의 미세 구조는 SEM, FT-IR, 인장특성, 그리고 [NCO]/[OH]의 mole %, 입도분석에 의해 측정하였다. 친환경적인 NATM에 관한 관심이 고조됨에 따라 스테인레스 등의 금속코팅에 더욱더 중요한 무용제 도료의 발전을 이끈다. 우리는 스테인레스 스틸의 부식을 방지할 수 있는 NATM(New Austria Tunnel Method)의 수지를 합성하였다. 폴리우레탄과 에폭시로 합성한 혼성 수지는 일반적 NATM 수지와 도료와 비교하여 강도와 내구력이 매우 양호하다. 혼성수지는 폴리올, 에폭시, MDI, 실리콘 계면활성제, 촉매, 가교제, 충전제로 구성된다. 충전제인 fume silica는 경화속도를 가속시킬 뿐만 아니라 열적 장벽으로 물성이 우수함을 나타냈다. NATM 수지의 기계적 특성은 [NCO]/[OH]의 mole%와 fume silica가 증가함에 따라 강도가 증가하였다. 결론적으로 가교제와 fume silica가 함유된 혼성수지의 미세구조는 스테인레스 스틸같은 금속물질의 열경화코팅을 위한 좋은 물질이다.

Precoated Metal용 Copolyester Resin의 합성 및 물성 (Synthesis and Properties of Copolyester Resin for Precoated MeTAL)

  • 박이순;이태형;김순학;장진규
    • 공업화학
    • /
    • 제10권3호
    • /
    • pp.427-431
    • /
    • 1999
  • 알루미늄 혹은 철판의 코일 코팅 (coil coating) 공정에 사용되는 기본 수지인 copolyester의 중합 방법 맞 생성된 copolyester의 분자량, 열적 성질 및 용해 특성에 대해 조사를 하였다. Copolyester 수지의 합성은 1단계 반응에서 bishydroxyethyl terephthalate (BHET). bishydroxyneopentyl tereph-thalate (BHNPT), bishydroxyethyl isophthalate (BHEI), bishydroxyneopentyl sebacate (BHNPS), bishydroxyncopentyl adipicate (BHNPA), bishydro-xyethyl adipicate (BHEA) 올리고머를 esterification 반응을 통해 얻고 이들을 적정 mole 비로 혼합한 다음 polycondensation 반응을 시키는 2단계 반응으로 진행시켜 GPC로 측정된 중량 평균 분자량이 30,000~59,000 g/mole의 범위에 있는 비교적 고분자량의 copolyester를 얻을 수 있었다. 합성된 copolyester 시료들은 모두 $T_m$을 냐타내지 않아 비결정성 수지임을 알 수 있었고 이것은 고분자 주쇄 내에 kink 구조를 유발하는 BHEI와 bulky 한 neopentyl 연결기를 가지는 BHNPT, BHNPS와 같은 올리고머를 포함하는데 기인한 것으로 생각되었다. Copolyester 시료 중에서 BHEI (0.3 mole), BHNPS (0.1 mole) 올리고머를 같은 비율로 유지하고 BHET의 약 반 정도를 benzene 환 내에 같은 para 연결 구조를 가지나 bulky한 neopentyl glycol로 치환된 BHNPT로 바꾸어줌으로서 $40^{\circ}C$ 이상의 비교적 높은 $T_g$를 유지하면서 상온 및 서온 ($-5^{\circ}C$)에서 톨루엔 용매에 용해성이 높은 copolyester 수지를 얻을 수 있었다.

  • PDF

코직산 유도체의 합성과 미백효과 (Synthesis of Novel Kojic Acid Derivative and Its Anti-pigmentation Effect)

  • 김기호;김기수;김진국;한창성;김영희;박수남
    • 대한화장품학회지
    • /
    • 제30권3호
    • /
    • pp.409-414
    • /
    • 2004
  • 코직산은 티로시나제의 억제에 의한 미백효능을 가지는 물질로 널리 알려져 있으나, 낮은 안정성으로 인하여 화장품 원료로의 사용에 제약을 갖고 있다. 이에 본 연구에서는 유기합성적 방법에 의해 안정성과 미백효과를 가지는 코직산 유도체를 고수율로 합성하였다. $O-pentaacetyl-{\beta}-D-glucose를$ 루이스산과 유기염기를 이용하여 위치 선택적이고, 입체 선택적으로 코직산의 6번 위치에 도입시켜 $kojic\;acid\;6-O-2',3',4',6'-tetraacetyl-{\beta}-D-glucopyranoside\;(KTGP, 80{\%})를$ 합성한 후, 가수분해하여 kojic acid 6-0-f-D-glucopyranoside $(KGP, 70\%)를$ 수득하였다. $^1H-NMR과\;^{13}C-NMR$ 분석으로 구조를 확인하였다. KGP를 가지고 티로시나제 활성저해, 프리라디칼소거능과 멜라닌합성저해 실험을 실시하였고, 그 결과 티로시나제 활성저해와 프리라디칼소거능에서 코직산보다 높거나 비슷한 활성을 보여주었다. 코직산 수준의 미백효능을 확인하였기에 유기 화학적으로 합성된 KGP의 미백원료로서 사용을 기대할 수 있다.

메타게놈유래의 저온성 에스터라제 EM2L8의 효소적 특성과 이를 활용한 고지혈증 치료제 키랄소재의 생산 (Characterization of a Psychrophilic Metagenome Esterase EM2L8 and Production of a Chiral Intermediate for Hyperlipemia Drug)

  • 정지혜;최윤희;이정현;김형권
    • 한국미생물·생명공학회지
    • /
    • 제37권2호
    • /
    • pp.118-124
    • /
    • 2009
  • 에스터라제 EM2L8 유전자를 E. coli 균에서 발현하고 에스터라제 활성을 분석한 결과, $40-45^{\circ}C$에서 최적의 효소활성을 보였다. $15^{\circ}C$에서 최대활성의 45% 활성을 보였고 $15-45^{\circ}C$ 사이의 활성화에너지는 4.9 kcal/mol로 계산됨으로써 전형적인 저온 적응효소인 것으로 밝혀졌다. 또한, $4^{\circ}C$에서 장기보관해도 효소활성이 전혀 줄어들지 않음을 통해서 저온에서 안정한 효소임을 알게 되었다. 반응액에 에탄올, 메탄올, 아세톤을 15% 농도까지 첨가해도 효소활성이 줄어들지 않았으며 DMSO의 경우, 40% 농도까지 첨가해도 효소활성이 유지되는 것으로 나타났다. 이 효소 40 U을 Tris-HCl 용액(1.2 mL, pH 9.0)에 넣고 $30^{\circ}C$에서 (R,S)-ECHB(0.5%, 38 mM)의 분해반응을 수행한 결과, 기질이 가수분해되어 CHBacid가 생성되며 기질의 분해속도는 $6.8\;{\mu}mole/h$로 계산되었다. (R)-ECHB 보다 (S)-ECHB 기질을 빠르게 분해하였으며 전환수율이 80%일 때, e.e.s 값이 40%로 측정되었다. 반응액에 DMSO를 10% (v/v) 농도로 각각 첨가한 결과, 기질의 분해 속도는 $10.4\;{\mu}mole/h$로 증가되었다. 하지만 DMSO의 유무와 상관없이 전환수율에 따른 e.e.s 값은 유사하게 나타났다. 결론적으로 이 효소는 저온과 각종 유기용매 하에서도 높은 안정성과 활성을 갖고 있기 때문에 각종 의약품의 유기합성공정에서 효소촉매로 활용될 수 있을 것으로 기대된다.

PIT유화시스템을 이용한 제주산 유채씨앗 오일추출물의 나노에멀젼의 제조 및 효과 (Effectiveness and Preparation of Nano-emulsion of a Rapeseed Oil Extract Originated from Jeju with PIT Emulsifying System)

  • 주세진;이정구;김학수;이민희;김인영
    • 한국응용과학기술학회지
    • /
    • 제29권3호
    • /
    • pp.486-494
    • /
    • 2012
  • 다양한 화장품에 응용을 위하여 제주산 유채오일 추출물을 대상으로 PIT유화시스템을 이용한 나노에멀젼을 제조하였다. 천연 유채오일 추출물은 n-헥산을 용매로 사용하여 추출하였다. 천연유채오일 추출물은 엷은 노란색의 점성을 가진 액체이었고, 수율은 $43{\pm}2.5%$이었다. 산가는 $2.76{\pm}0.5$이었고, 비중은 $0.89{\pm}0.05$ 이었다. 20wt%의 유채오일을 사용한 PIT-Yuche-NE의 입자크기는 50-120nm (평균입자크기: $82{\pm}5.8nm$)이었고, 제타 포텐셜은 -29.5mV 이었다. 이것은 $(PEG)_{5-30}$ 지방산 에테르를 사용하기 때문에 열역학적으로 안정하였다. 특징적인 결과로부터 얻은 몇 개의 결론을 다음과 같이 나열하였다. 첫째, DPPH (1,1-diphenyl-2-picrylhydrazyl radical)방법을 이용한 자유 라디칼 소거력을 측정하였다. PIT-Yuche-NE의 항산화력은 $37.2{\pm}6.7%$이었고, 비교군인 10 mg/mL의 PIT-Toco-NE(토코페롤 20wt% 나노에멀젼)은 $28.8{\pm}6.5%$, 10 mg/mL의 PIT-Nokcha-NE (녹차추출물 20wt% 나노에멀젼)은 $29.6{\pm}7.2%$이었다. 둘째, PIT-Yuche-NE의 콜라겐합성율은 $148{\pm}15.2%$ 이었고, 동일 농도에서 비교군인 PIT-Toco-NE은 $121{\pm}13.5%$, PIT-Nokcha-NE은 $95{\pm}12.7%$이었다. 셋째, 6시간 후, Aramo-TS를 사용한 Yuche-CRM의 피부보습효과는 $47{\pm}3.9%$ (*p-value£0.05, n=7)이었다. 반면, Toco-CRM은 $30{\pm}5.2%$(*p-value£0.05, n=7)이었고, Nokcha-CRM은 $35{\pm}4.5%$이었다. 따라서 Yuche-CRM은 다른 두 크림보다 높은 보습효과를 보였다. 최종적으로 본 연구는 화장품 산업 및 제약산업에서도 폭넓게 응용될 것으로 기대한다.