• Journal of Appropriate Technology
• /
• v.6 no.1
• /
• pp.28-36
• /
• 2020

Sustainable appropriate technology requires user-centered design with consideration of the political, cultural and environmental aspects of the area. However, in the preparation of appropriate technology, there is a limit to the prior grasp of the user's intention and experience leading to the actual behavior of the user after the dissemination. As a result, appropriate technologies are often inconvenient for practical use or used for other purposes, contrary to the designer's intention. This study analyzes the case of appropriate technology with an analysis framework that reflects Maier's affordance theory, and proposes a design solution that can overcome the limitations of existing design. Affordance theory is the theory of factors that cause the user to identify and use features through interpretation based on prior knowledge and experience about things. The analysis cases in this study are the interviews with the designers, management education materials, and manager interviews for water purification systems at three of six schools in Binh Dinh Province, Vietnam, from August 2015 to January 2018. The case was attempted to be improved by periodic installation, maintenance, and inspection, but similar problems continued to occur. First, the facility inspections and manager interviews are compared with manager training materials distributed at the time of installation to find inconsistencies. Next, we analyze the designer's intended affordance and the affordances that actually influenced the management behavior. And then, we propose design solutions based on commonly found problems and affordances. This study suggests that it is necessary to apply the design considering the user's behavior before distributing the appropriate technology, and this study will be precedent in the process of finding the improvement through the analysis framework based on the affordance.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.6
• /
• pp.651-662
• /
• 2022

The electrochemical impedance spectroscopy(EIS) method was used to evaluate the concrete deterioration process related to chloride-induced steel corrosion with various corrosion levels(initiation, rust propagation and acceleration periods). The impressed current technique, with four total current levels of 0C, 13C, 65C and 130C, was used to accelerate steel corrosion in concrete cylinder samples with w/c ratio of 0.4, 0.5, and 0.6, immersed in a 0.5M NaCl solution. A series of EIS measurements was performed to monitor concrete deterioration during the accelerated corrosion test in this study. Some critical parameters of the equivalent circuit were obtained through the EIS analysis. It was observed that the charge transfer resistance(R_c) dropped sharply as the impressed current increased from 0C to 13C, indicating a value of approximately 10kΩcm². However, the sensitivity of R_c significantly decreased when the impressed current was further increased from 13C to 130C after corrosion of steel had been initiated. Meanwhile, the double-layer capacitance value(C_dl) linearly increased from 50×10^-6μF/cm² to 250×10^-6μF/cm² as the impressed current in creased from 0C to 130C. The results in this study showed that monitoring C_dl is an effective measurement parameter for evaluating the progress of internal concrete damages(de-bonding between steel and concrete, micro-cracks, and surface-breaking cracks) induced by steel corrosion. The findings of this study provide a fundamental basis for developing an embedded sensor and signal interpretation method for monitoring concrete deterioration due to steel corrosion at various corrosion levels.

• Korean Chemical Engineering Research
• /
• v.61 no.2
• /
• pp.302-311
• /
• 2023

This study was conducted to evaluate the applicability of castor oil (CSO) as a natural wood preservative. CSO was treated into wood blocks prepared with domestic and imported wood species using a vacuum-pressure method, and then treatability, leachability and decay resistance of the CSO-treated wood blocks were examined. Although CSO was penetrated effectively into wood blocks of all wood species, the CSO-treatability was the highest in Western hemlock, followed by Japanese larch (LA), soft maple and Mongolian oak due to the difference of its anatomical structure. Except for LA, the more retained, the more leached during a saline water-immersing process for 48h. The use of ethanol added to reduce the viscosity of CSO affected negatively the treatability and leachability of wood blocks. Decay resistance, which was evaluated by the weight loss of wood blocks exposed against Fomitopsis palustris (FOP) and Trametes versicolor, of the CSO-treated/leached wood blocks was superior to that of control. Especially, most of wood blocks treated with preserving solution composed of only CSO (CSO-2) did not decayed and showed a very low weight loss against FOP. The decay resistance results from CSO retained in wood blocks after leaching. The retention of CSO could identify using the observation of X-ray microscope. Length of wood strips, which were treated with CSO-2 and then immersed in saline water for 2 weeks, hardly changed in all cutting directions. In addition, weight gain and length-swelling rate of the wood strips were extremely low compared to those of control. These results indicate that moisture resistance of the wood strips was improved by the CSO treatment. It is concluded that the treatment of CSO using a vacuum-pressure method provides the decay resistance and dimensional stability of wood, and thus CSO can be used as a natural wood preservative on various indoor and outdoor circumstances.

• Applied Chemistry for Engineering
• /
• v.34 no.3
• /
• pp.258-263
• /
• 2023

In this study, conductive polymers and the enzyme tyrosinase (Tyr) were deposited on the surface of a screen printed carbon electrode (SPCE), which can be fabricated as a disposable sensor chip, and applied to the detection of bisphenol F (BPF), an endocrine disruptor with proven links to male diseases and thyroid disorders, using electrochemical methods. On the surface of the SPCE working electrode, which was negatively charged by oxygen plasma treatment, a positively charged conductive polymer, poly(diallyldimethyl ammonium chloride) (PDDA), a negatively charged polymer compound, poly(sodium 4-styrenesulfonate) (PSS), and another layer of PDDA were layered by electrostatic attraction in the order of PDDA, PSS, and finally PDDA. Then, a layer of Tyr, which was negatively charged due to pH adjustment to 7.0, was added to create a PDDA-PSS-PDDA-Tyr sensor for BPF. When the electrode sensor is exposed to a BPF solution, which is the substrate and target analyte, 4,4'-methylenebis(cyclohexa-3,5-diene-1,2-dione) is generated by an oxidation reaction with the Tyr enzyme on the electrode surface. The reduction process of the product at 0.1 V (vs. Ag/AgCl) generating 4,4'-methylenebis(benzene-1,2-diol) was measured using cyclic and differential pulse voltammetries, resulting in a change in the peak current with respect to the concentration of BPF. In addition, we compared the detection performance of BPF using an ionic liquid electrolyte as an alternative to phosphate-buffered saline, which has been used in many previous sensing studies. Furthermore, the selectivity of bisphenol S, which acts as an interfering substance with a similar structure to BPF, was investigated. Finally, we demonstrated the practical applicability of the sensor by applying it to analyze the concentration of BPF in real samples prepared in the laboratory.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.12
• /
• pp.157-167
• /
• 2009

Recently, the leakage of confidential information and personal information is taking place on the Internet more frequently than ever before. Most of such online security incidents are caused by attacks on vulnerabilities in web applications developed carelessly. It is impossible to detect an attack on a web application with existing firewalls and intrusion detection systems. Besides, the signature-based detection has a limited capability in detecting new threats. Therefore, many researches concerning the method to detect attacks on web applications are employing anomaly-based detection methods that use the web traffic analysis. Much research about anomaly-based detection through the normal web traffic analysis focus on three problems - the method to accurately analyze given web traffic, system performance needed for inspecting application payload of the packet required to detect attack on application layer and the maintenance and costs of lots of network security devices newly installed. The UTM(Unified Threat Management) system, a suggested solution for the problem, had a goal of resolving all of security problems at a time, but is not being widely used due to its low efficiency and high costs. Besides, the web filter that performs one of the functions of the UTM system, can not adequately detect a variety of recent sophisticated attacks on web applications. In order to resolve such problems, studies are being carried out on the web application firewall to introduce a new network security system. As such studies focus on speeding up packet processing by depending on high-priced hardware, the costs to deploy a web application firewall are rising. In addition, the current anomaly-based detection technologies that do not take into account the characteristics of the web application is causing lots of false positives and false negatives. In order to reduce false positives and false negatives, this study suggested a realtime anomaly detection method based on the analysis of the length of parameter value contained in the web client's request. In addition, it designed and suggested a WAF(Web Application Firewall) that can be applied to a low-priced system or legacy system to process application data without the help of an exclusive hardware. Furthermore, it suggested a method to resolve sluggish performance attributed to copying packets into application area for application data processing, Consequently, this study provide to deploy an effective web application firewall at a low cost at the moment when the deployment of an additional security system was considered burdened due to lots of network security systems currently used.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6B
• /
• pp.731-741
• /
• 2008

Previous studies on the numerical simulation at the tidal reach of Han River tend to restrict downstream boundary as Jeon-ryu station due to difficulties in gaining cross section data and tidal elevation values at Yu-do. But, in this study, geometries beyond the confluence of Gok-reung stream and Im-jin River are constructed based on the numerical sea map; tidal elevation at the downstream boundary, Yu-do is estimated by harmonic analysis of In-cheon tide gage station so that hydrodynamic and diffusion behavior have been analyzed. The domain ranging from Shin-gok submerged weir to Yu-do is selected (which is 36.8 km in length). RMA-2 and RAM4 developed by Il Won Seo (2008) are applied to simulate flow and diffusion behavior, respectively. Numerical results of flow characteristic are compared with the measured data at Jeon-ryu station. Simulation is carried out from June 23 to 25 in 2006 on the ground that hydrologic data is satisfactory and tidal difference is huge during that period. The result shows that reverse flow occurs 5 times according to the tidal elevation at Yu-do and the maximum reverse flow is observed up to Jang-hang IC, which is 32.9 km in length. Also analysis is focused on the process of generation and disappearance of reverse flow, the distribution of water surface elevation and velocity along the maximum velocity line, and the transport of nonconservative pollutant. Pollutant injected from Gul-po stream spreads widely across the river; however, the size of BOD cloud entering from Gok-reung stream is relatively small because water depth at the mid and left side becomes deeper and maximum velocity occurs along the right bank so that transverse mixing is completed quickly. Finally, mixing characteristic of horizontal salinity distribution is obtained by estimating the salinity input with analytical solution of 1D advection-dispersion equation.

• Economic and Environmental Geology
• /
• v.56 no.6
• /
• pp.715-728
• /
• 2023

Tracksite of pterosaurs, birds, and dinosaurs in Chungmugong-dong in Jinju was designated as a natural monument in 2011 and is known as the world's largest in terms of the number and density of pterosaur footprints. This site has been managed by installing protection buildings to conserve in 2018. About 17% of the footprints of pterosaur, theropod, and ornithopod in this site under management in the 2nd protection building are of great academic value, but observation of footprints has difficulties due to continuous physical and chemical damage. In particular, the accumulation of milk-white contaminants is formed by the gypsum and air pollutant complex. Gypsum remains evaporated with a plate or columnar shape in the process of water circulation around the 2nd protection building, and the dust is from through the inflow of the gallery windows. The aqueous solution of gypsum, consisting of calcium from the lower bed and sulfur from grass growth, is catchmented into the groundwater from the area behind the protection building. Pollen and a few minerals other constituents of contaminants, go through the gallery window, which makes it difficult to expel dust. To conserve the fossil-bearing beds from two contaminants of different origins, controlling the water and atmospheric circulation of the 2nd protection building and removing the contaminants continuously is necessary. When cleaning contaminants, the steam cleaning method is sufficiently effective for powder-shaped milk-white contaminants. The fossil-bearing bed consists of dark gray shale with high laser absorption power; the laser cleaning method accompanies physical loss to fossils and sedimentary structures; therefore, avoiding it as much as possible is desirable.

• Journal of Adhesion and Interface
• /
• v.24 no.4
• /
• pp.136-142
• /
• 2023

In this study, TEOS was used as a silica source, and a triblock copolymer (P123) was used as a template to produce mesoporous silica with a well-ordered hexagonal mesopore array through a self-assembly method and hydrothermal process under acidic condition. (Surfactant-extracted SBA-15). Surfactant-extracted SBA-15 showed the particle shape of a short rod with a size of approximately 980 nm. The surface area and pore diameter were 730 m²g^-1 and 70.8 Å, respectively. Meanwhile, aminosilane (3-aminopropyltriethoxysilane, APTES) was grafted into the mesopores using a post-synthesis method. Mesoporous silica (APTES-SBA-15) modified with aminosilane had a well-ordered pore structure (p6mm) and well-maintained the particle shape of short rods. The surface area and pore diameter of APTES-SBA-15 decreased to 350 m²g^-1 and 60.7 Å, respectively. APTES-modified mesoporous silica was treated with a solution of rare earth metal ions (Eu³⁺, Tb³⁺) to synthesize a mesoporous silica material in which rare earth metal complexes were introduced into the mesopores. (Eu/APTES-SBA-15, Tb/APTES-SBA-15) These materials exhibited characteristic photoluminescence spectra by λ_ex=250 nm. (⁵D₄→⁷F₅ (543.5 nm), ⁵D₄→⁷F₄ (583.5 nm), ⁵D₄→⁷F₃ (620.2 nm) transitions for Tb/APTES-SBA-15; ⁵D₀→⁷F₀ (577.7 nm), ⁵D₀→⁷F₁ (592.0 nm), ⁵D₀→⁷F₂ (614.9 nm), ⁵D₀→⁷F₃ (650.3 nm) and ⁵D₀→⁷F₄ (698.5 nm) transitions for Eu/APTES-SBA-15)

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.18 no.5
• /
• pp.17-32
• /
• 2023

The entrepreneurial activities of college students play a significant role in modern economic and social development, particularly as a solution to the changing economic landscape and youth unemployment issues. Introducing innovative ideas and technologies into the market through entrepreneurship can contribute to sustainable economic growth and social value. Additionally, the entrepreneurial intentions of college students are shaped by various factors, making it crucial to deeply understand and appropriately support these elements. To this end, this study systematically explores the importance and impact of role models through a multiple serial mediation analysis. Through a survey of 300 college students, the study analyzed how two psychological variables, growth mindset and entrepreneurial self-efficacy, mediate the influence of role models on entrepreneurial intentions. The presence and success stories of role models were found to enhance the growth mindset of college students, which in turn boosts their entrepreneurial self-efficacy and ultimately strengthens their entrepreneurial intentions. The analysis revealed that exposure to role models significantly influences the formation of a growth mindset among college students. This mindset fosters a positive attitude towards viewing challenges and failures in entrepreneurship as learning opportunities. Such a mindset further enhances entrepreneurial self-efficacy, thereby strengthening the intention to engage in entrepreneurial activities. This research offers insights by integrating various theories, such as mindset theory and social learning theory, to deeply understand the complex process of forming entrepreneurial intentions. Practically, this study provides important guidelines for the design and implementation of college entrepreneurship education. Utilizing role models can significantly enhance students' entrepreneurial intentions, and educational programs can strengthen students' growth mindset and entrepreneurial self-efficacy by sharing entrepreneurial experiences and knowledge through role models. In conclusion, this study provides a systematic and empirical analysis of the various factors and their complex interactions that impact the entrepreneurial intentions of college students. It confirms that psychological factors like growth mindset and entrepreneurial self-efficacy play a significant role in shaping entrepreneurial intentions, beyond mere information or technical education. This research emphasizes that these psychological factors should be comprehensively considered when developing and implementing policies and programs related to college entrepreneurship education.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.17 no.2
• /
• pp.65-80
• /
• 2022

Despite the uncertainty and risky factors of startups, the special and critical role of accelerators in carrying out professional nurturing and investment for them is becoming increasingly significant in the startup social-system. However, academic research on investment determinants that have a profound impact on the survival of accelerators is lacking, and there are only a few empirical studies on the classification and importance of factors, and they do not enjoy the benefits of theoretical studies. This study proposes a business model innovation framework based on the business model innovation theory that reflects the nature and properties of startups that are investment targets of accelerators and derives 12 investment decision factors. The framework defines that the target, direction, and performable force of startup innovation are a business model, strategy, and dynamic capability. Besides, the framework analyzes the investment decision factors of the existing accelerators based on the business model innovation framework to verify the suitability and sufficiency of the composition. As a result of the analysis, first, most of the items were faithfully composed from a static point of view of business model innovation, but it was found that the factors related to the core activities to evaluate the activity and customer relationship were insufficient. Second, from the strategic point of view, the necessity of developing factors that can encompass the definition and content of core resources, which are internal strategic factors, was raised. Third, from the dynamic point of view, it was found that many of the investment determinants of accelerators were concentrated on the lower level of dynamic competencies. This can be judged as a result of reflecting the characteristics of a startup that needs to develop a solution with few resources and a small number of team members. In addition, the roles and interrelationships between each factor are not clear, thus it was found as a limiting point for startups to view and evaluate the direction and process in which startups dynamically innovate their business models. This study is considerably differentiated in that it provides a business model innovation framework and offers a theoretical basis for investment determinants by deriving the investment determinants of accelerators based on the framework and design the foundation for subsequent research. The business model innovation framework presented in this study has great implications in that it contributes to the achievement of startups, accelerators, and startup support organizations.