• Computers and Concrete
• /
• v.21 no.1
• /
• pp.31-37
• /
• 2018

This paper deals with the stability analysis of concrete pipes mixed with nanoparticles conveying fluid. Instead of cement, the $Fe_2O_3$ nanoparticles are used in construction of the concrete pipe. The Navier-Stokes equations are used for obtaining the radial force of the fluid. Mori-Tanaka model is used for calculating the effective material properties of the concrete $pipe-Fe_2O_3$ nanoparticles considering the agglomeration of the nanoparticles. The first order shear deformation theory (FSDT) is used for mathematical modeling of the structure. The motion equations are derived based on energy method and Hamilton's principal. An exact solution is used for stability analysis of the structure. The effects of fluid, volume percent and agglomeration of $Fe_2O_3$ nanoparticles, magnetic field and geometrical parameters of pipe are shown on the stability behaviour of system. Results show that considering the agglomeration of $Fe_2O_3$ nanoparticles, the critical fluid velocity of the concrete pipe is decreased.

• Biomolecules & Therapeutics
• /
• v.1 no.1
• /
• pp.31-36
• /
• 1993

To evaluate the feasibility of transmucosal delivery of methionine enkephalin analog, [$D-Ala^2$]-me-thionine enkephalinamide (YAGFM), the influence of pH, temperature, ionic strength and initial peptide concentration on the physicochemical stability of YAGFM in aqueous buffered solutions were investigated using a stability-indicating HPLC method. The degradation of YAGFM followed the pseudo-first-order kinetics. From the pH-rate profile, the maximum stability of YAGFM was shown to be at the pH of about 5.0. The halflife for the degradation of YAGFM was found to be 181.3 days at pH 5.0 and $37^{\circ}C.$ Arrhenius plots of the data obtained at 25~$45^{\circ}C$ were reasonably linear with a correlation coefficient greater than 0.99, and the activation energy was calculated to be 8.9 kcal/mole. A higher ionic strength and/or a higher peptide concentration in buffered solutions retarded the degradation of YAGFM.

• YAKHAK HOEJI
• /
• v.28 no.6
• /
• pp.299-303
• /
• 1984

In order to eluciate the effect of humidity and organic solvent on the decomposition of carbamide peroxide, the kinetic study was carried out. The carbamide peroxide was prepared from urea and 30%-hydrogen peroxide. The accelerated stability analysis for carbamide peroxide crystal in various relative humidity, and for 10%-carbamide peroxide solution of organic solvents were investigated. Both humidity and temperature were important factors influencing the decomposition rate of carbamide peroxide crystal. The higher the humidity and temperature, the greater was the reaction rate. The breakdown rate of crystal was observed as an apparent zero-order, and was faster than the rate of decomposition in dilute propylene glycol, glycerine or sorbitol solutioos which were measured as an apparent first-order reaction. The more dilute to 10% the organic solvents of 10%-carbamide peroxide, the slower was breakdown rate. It is, therefore, useful in the aspects of stability and economics to substitute solvent of carbamide peroxide topical solution (USP XXI) with 10%-propylene glycol or glycerine instead of anhydrous glycerine.

• Fibers and Polymers
• /
• v.2 no.1
• /
• pp.148-151
• /
• 2001

The effect of main chain structure of anion-containing copolyesters on the properties of copolyester sizing agents was investigated. The copolyesters were prepared by conventional two step polymerization technique from DMT, DMI, DMS, EG, and DEG. The copolyesters synthesized were characterized by atomic absorption spectroscopy, $^1$H-NMR Spectroscopy, GC, FTIR Spectroscopy, and DSC. The solubility decreased as the DMT content increased. The copolyesters having DMT:DMI = 1:1 showed the minimum viscosity. The effect of EG content on the solution stability was not clear and the samples having high DMI content showed better solution stability. The water resistance was best when only DMI and EG were used, while it was worst when DMT:DMI was 1:0.

• Journal of applied mathematics & informatics
• /
• v.30 no.5_6
• /
• pp.1031-1049
• /
• 2012

In this paper, a class of impulsive fuzzy bi-directional associative memory (BAM) neural networks with distributed delays and variable coefficients are considered. Using Lyapunov functional method and fixed point theorem, we derived some sufficient conditions for the existence and globally exponential stability of unique periodic solution of the networks. The results obtained are new and extend the previous known results. In addition, an example is given to show the effectiveness of our results obtained.

• Korean Journal of Clinical Pharmacy
• /
• v.8 no.2
• /
• pp.147-158
• /
• 1998

The purpose of this study was to test the stability of TPN basic solutions containing amino acids and dextrose. Test solutions containing $4.25\%$ amino acids in $25\%$ dextrose (central TPN basic solution) or $4.25\%$ amino acids in $10\%$ dextrose (peripheral TPN basic solution) were prepared. Two different amino acids solutions $(Fravasol^{(R)}\;vs\;Freamine^{(R)})$ were tested. The samples were taken from each admixture and stored in the evacuated, sterile containers at $2{\sim}8^{\circ}C$ and ambient room temperature. Each sample was analyzed at 0, 3, 7, 14 and 30 days of storage. Each amino acid was analyzed by amino acid analyzer. Dextrose content was measured by polarimeter. The pH and chromagen formation were also monitored. The decomposition was measured by the changes in concentration of amino acids and dextroser TPN basic $solution-Freamine^{(R)}$ admixture stored at $2\sim8^{\circ}C$ were stable for 30 days. Central and peripheral TPN basic solutions stored at room temperature were stable for 7 days and 14 days, respectively. There were no changes in color for 30 days by naked eye. Amino acid concentrations in TPN basic $solution-Fravasol^{(R)}$ admixture stored at $2\sim8^{\circ}C$ or room temperature were stable for 30 days. But, significant color change was detected according to passing time. In conclusion, Peripheral TPN basic $solution-Fravasol^{(R)}$ admixture stored at room temperature and in refrigerator were stable for 3 days and 7 days, respectively. However, central TPN basic solution-Fravasol admixtures were unstable. Therefore, it is recommended that it should be admixed right before use.

• Bulletin of the Korean Mathematical Society
• /
• v.44 no.4
• /
• pp.825-840
• /
• 2007

In this paper, we will find out the general solution and investigate the generalized Hyers-Ulam-Rassias stability problem for the following cubic functional equation 3f(x+3y)+f(3x-y)=15f(x+y)+15f(x-y)+80f(y). The concept of Hyers-Ulam-Rassias stability originated from Th. M. Rassias# stability theorem that appeared in his paper: On the stability of the linear mapping in Banach spaces, Proc. Amer. Math. Soc. 72(1978), 297-300.

• Journal of the Chungcheong Mathematical Society
• /
• v.26 no.1
• /
• pp.197-211
• /
• 2013

We study some stability properties in discrete Volterra equations by employing to change Yoshizawa's results in [13] for the nonlinear equations into results for the nonlinear discrete Volterra equations with unbounded delay.

• Journal of Pharmaceutical Investigation
• /
• v.41 no.6
• /
• pp.331-336
• /
• 2011

The instability of hirsutenone (HST), a potential therapeutic candidate for the treatment of atopic dermatitis (AD) and ovarian carcinoma, is one of the main concerns for the development of drug product. In the present study, aqueous stability of HST was investigated by kinetic analysis, and the effect of several factors covering temperature, nitrogen gas ($N_2$) flushing, and selection of proper antioxidant was compared. Cosolvent system composed of distilled water and methanol (9:1 v/v) was used as a vehicle to dissolve HST at the concentration of $200{\mu}g/mL$. Samples of aqueous solution were prepared under the absence or presence of antioxidants, such as ascorbic acid (AA), sodium edetate (EDTA), and ascorbyl palmitate (AP), and subjected for stability test. The degradation of HST in aqueous solution was followed by the first order kinetics with an extremely short half life of less than a week at room temperature, and was accelerated as the temperature increased. $N_2$ flushing brought a little enhancement in stability compared to control solution, but the effect was insufficient. The addition of AA and EDTA (0.1%) significantly enhanced the stability of HST at $40^{\circ}C$, but the addition of AP (0.01%) was limited due to its water insolubility and revealed no promising result. The stability of HST was increased proportionally by the amount of AA added, showing the difference in degree of stabilization as an order of magnitude. Finally, we conclude that HST was stabilized by the addition of a suitable antioxidant, suggesting AA as the most effective stabilizer.

• Textile Coloration and Finishing
• /
• v.31 no.4
• /
• pp.249-257
• /
• 2019

Baker's yeast(Saccharomyces cerevisiae) was used as a biocatalyst for eco-friendly indigo dyeing and the reducing power of yeast according to the alkaline solution type was compared. NaOH solution, lye, and buffer solution were used as alkaline solutions. The reducing power(K/S value, oxidation/reduction potential(ORP), pH) was monitored according to the elapsed time including the initiation of reduction, peak reduction, and the end of reduction. In all alkaline solutions, it was confirmed that yeast can be used reducing agent in indigo reduction dyeing. The pH stability and reducing power of buffer solution was better than that of NaOH alone. Although, pH and ORP stability of the reduction bath in lye were better than that of buffer solution, K/S value in buffer solution was higher compared to lye. The reducing power was different depending on the starting pH of the dye bath, and it was better when starting at pH 10.70 than at pH 11.30. Fastnesses to washing, rubbing, and light were relatively good with above rating 4. There was no significant difference in colorfastness depending on the type of alkaline solutions.