• Korean Chemical Engineering Research
• /
• 제58권1호
• /
• pp.98-105
• /
• 2020

By the gravimetric method at atmospheric pressure, the solubility of two α-amino acids was resolved over temperatures from (293.15 to 323.15) K. The α-amino acids studied were L-arginine and L-histidine. Results showed a salting-out effect on the solubility of the tested amino compounds. It is obvious that there was an increase in the solubility, in aqueous chloride solutions, with the increasing temperature. Results were translated regarding the salt hydration shells and the ability of the solute to form hydrogen-bond with water. The solubility data was precisely associated with a semi-empirical equation. The standard molar Gibbs free energies of transfer of selected α-amino compounds (Δ_trG^o) from pure water to aqueous solutions of the chloride salts have been calculated from the solubility data. The decrease in solubility is correlated to the positive (Δ_trG^o) value which is most part of the enthalpic origin.

• 멤브레인
• /
• 제2권2호
• /
• pp.129-134
• /
• 1992

Poly(n-butyl methacrylate)(PnBMA)에 의한 메탄가스의 용해도를 35atm의 압력까지 측정하였다. 용해도의 측정은 -$10^{\circ}$C 에서 30$^{\circ}$C까지의 온도범위에서 용적법에 의하여 실시하였다. PnBMA에 의한 메탄가스의 용해도는 유리 전이온도 이하에서 측정압력에 대하여 비선형으로 나타났으며, dual-mode sorption model로 만족스럽게 해석할 수 있었다. Langmuri capacity constant는 온도가 증가할수록 감소하였으며 유리전이온도 근처에서 영이 되며, 용해도 등온선은 유리 전이온도 이상에서는 직선으로 나타났다. Dual-mode sorption parameter의 온도 의존성도 고찰하였다.

• 한국의류산업학회지
• /
• 제11권4호
• /
• pp.672-677
• /
• 2009

To reduce the dependence of wool dyeing on the temperature several solvents with different properties and structures were added to the dye bath of C. I. Acid Yellow 42. Nearly the same total solubility parameters(${\delta}_t$) of solvents as those of wool fiber and hydrophobic part of the dyestuff were needed to increase disaggregation of dye molecules, loosening the wool fiber and wickabilty of dyeing solution; besides, the large surface tension(${\gamma}$) value of the solvents and the well balanced values of the three-component Hansen solubility parameters such as dispersion(${\delta}_d$), polar(${\delta}_p$), and hydrogen(${\delta}_h$) bonding parameters were required. Among the added solvents dimethyl phthalate(DMP) and acetophenone(AP) were satisfied with these conditions and worked the most successfully in the low temperature wool dyeing. Their effectiveness proven by the dyeing rate and the activation energy ($E_a$) of the dyeing was in the order of DMP > AP > DBE > CH > M >NONE. In conclusion the total solubility parameters(${\delta}_t$), the three-component Hansen parameters and the surface tension(${\gamma}$) of DMP and AP could be the guidelines to select suitable solvents for low temperature wool dyeing.

• 한국재료학회지
• /
• 제24권2호
• /
• pp.81-86
• /
• 2014

The nitrogen solubility and nitride capacity of $CaO-SiO_2-Al_2O_3-MgO-CaF_2$ slag systems were measured by using gas-liquid equilibration at 1773K. The nitrogen solubility of this slag system decreased with increasing CO partial pressure, with the linear relationship between nitrogen contents and oxygen partial pressure being -3/4. This system was expected to show two types of nitride solution behavior. First, the nitrogen solubility decreased to a minimum value and then increased with the increase of CaO contents. These mechanisms were explained by considering that nitrogen can dissolve into slags as "free nitride" at high basicities and as "incorporated nitride" within the network at low basicities. Also, the basicity of slag and nitride capacity were explained by using optical basicity. The nitrogen contents exhibited temperature dependence, showing an increase in nitrogen contents with increasing temperature.

• Korean Chemical Engineering Research
• /
• 제62권3호
• /
• pp.253-261
• /
• 2024

The impact of temperature on electrode reactions in 100 cm² molten carbonate cells operating as Fuel Cells (FC) and Electrolysis Cells (EC) was examined using the Reactant Gas Addition (RA) method across a temperature range of 823 to 973 K. The RA findings revealed that introduction of H₂ and CO₂, reduced the overpotential at Hydrogen Electrode (HE) in both the modes. However, no explicit temperature dependencies were observed. Conversely, adding O₂ and CO₂ to the Oxygen Electrode (OE) displayed considerable temperature dependencies in FC mode which can be attributed to increased gas solubility due to the electrolyte melting at higher temperatures. In EC mode, there was no observed temperature dependence for overpotential. Furthermore, the addition of O₂ led to a decrease in overpotential, while CO₂ addition resulted in an increased overpotential, primarily due to changes in the concentration of O₂ species.

• Bulletin of the Korean Chemical Society
• /
• 제15권2호
• /
• pp.115-118
• /
• 1994

Samples of ($Bi_{2-x}Sb_x)PbSr_2Ca_2Cu_3O_y$, compositions with x=0.0, 0.1, and 0.2 were prepared by solid-state reaction. The solubility of Sb into the 2223 phase is lower than 0.05 for the ratio of Sb/Bi. The lack of stability of the Sb-substituted $Bi_2O_2$ double layers is likely to cause the solubility low. There is no great dependence of lattice parameters on the Sb-content, and bonds around the square-pyramidal Cu atom are not affected by the $Sb^{3+}$ ion substituted. The superconducting transition temperature of this system is decreased gradually with increase of Sb, which is tentatively attributable to the perturbation of the Bi 6p-O 2p band and/or to the low volume fraction of the 2223 phase.

• 한국수소및신에너지학회논문집
• /
• 제19권1호
• /
• pp.49-55
• /
• 2008

The feasibility of ionic liquid as a novel absorbent of $SO_2$ for the separation of $SO_2$ from $SO_2/O_2$ mixture in the thermochemical IS(Iodine-Sulfur) cycle was investigated. 1,3-dimethylimidazolium methylsulfate ([DMIm]$MeSO_4$) had shown twenty five times higher solubility of $SO_2$ than that of $O_2$. The dependence of $SO_2$ solubility by [DMIm]$MeSO_4$ on temperature and $SO_2$ partial pressure was examined, which confirmed the possibility of temperature and pressure swing for the separation process. Through cyclic absorption and desorption with temperature swing the stability of [DMIm]$MeSO_4$ in the separation process was also demonstrated. As a result of the experiments carried out, $SO_2$ separation from $SO_2/O_2$ mixture with ionic liquid([DMIm]$MeSO_4$) can be applied to the thermochemical IS cycle.

• 한국수산과학회지
• /
• 제27권1호
• /
• pp.13-26
• /
• 1994

본 연구에서는 우리나라의 연근해에서 생산되는 해조류를 이용하여 압출 성형물을 제조하기 위하여 단축스쿠류 압출성형기를 이용, corn grits에 미역 분말을 첨가하여 압출성형시켰을 때 일어나는 이화학적 특성변화를 반응표면 실험계획법에 의하여 분석하였다. 미역분말을 첨가한 corn grits압출성형물의 이화학적 측정치인 각 종속변수들간의 단순상관관계를 보면 밀도는 팽화율, 명암도, 파단강도는 수분용해 지수, 명암도, 수분흡수지수는 수분용해도지수에서 유의차를 나타내었다. 독립변수인 수분함량($15{\sim}21\%$), 미역분말함량($10{\sim}30\%$) 및 토출구온도($95{\sim}115^{\circ}C$)의 주어진 범위에서 각 종속변수인 이화학적 특성에 대한 영향을 3차원 반응표면 회귀분석을 하였을 때, 팽화율은 수분함량이 감소하고 토출구 온도가 증가할 때 증가하였으며, 밀도는 수분함량과 미역분말함량이 증가함에 따라 증가하는 것으로 나타났다. 파단강도는 수분함량과 미역분말함량이 증가함에 따라 증가하는 것으로 나타났다. 파단강도는 수분함량이 증가함에 따라 증가하는 반면, 미역분말함량에 따라서는 감소하는 경향이었다. 수분용해도지수는 수분함량이 증가할수록 증가하는 경향으로 나타났고, 명암도는 대체로 미역함량이 증가함에 따라 감소하는 경향을 보여주었다.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.327-327
• /
• 2006

Methyl glycidyl ether has been polymerized in a controlled fashion at low temperature in toluene using the combination of tetraoctyl ammonium bromide and triisobutyl aluminum. Poly(glycidyl methyl ether)s with molar masses ranging from 3 000 to about 90 000 g/mol and narrow polydispersities (<1.2) were prepared and the dependence of their solubility and LCST in water as a function on their molar masses investigated.

• 한국세라믹학회지
• /
• 제35권10호
• /
• pp.1014-1019
• /
• 1998

As results of the study on the sinterbility of YIG at the low temperature using CuO as additive CuO com-pound which contain {{{{ { {Fe }_{2 }O }_{3 } }} was shown liquid in sintering process. YIG crystal dissolved into CuO compound liquid phase and then Y element which is considered no solubility in solid CuO compound moved to the grain during cooling. The abnormal grain growth up to 150${\mu}{\textrm}{m}$ at CuO 8.6mole% was shown due to shape accomdation reaction and local liquid distribution. The apparent density of YIG shows minimum at CuO 8.6 mole% due to abnormal grain growth and the saturation magnetization decrease dramatically at 32.5mole% due to orthoferrite formation.