• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.4
• /
• pp.852-856
• /
• 2009

Poly(ethyleneglycol methacrylate-co-benzyl methacrylate) (P(PEGMA-co-BMA)) microgel was prepared by precipitation copolymerization of PEGMA and benzyl methacrylate in poly(acrylic acid)/ethanol solution. The microgels with various sizes were obtained by changing the concentration of poly(acrylic acid), monomer and nature of solvents. The particle size of P(PECMA-co-BMA) microgels was decreased with increasing the concentration of poly(acrylic acid) and increased with that of monomer. By increasing solubility parameter of solvents, the particle size was inecreased. The size of P(PEGMA-co-BMA) microgels was controlled by experimental conditions from $0.1{\mu}m$ to $0.35{\mu}m$.

• Journal of Pharmaceutical Investigation
• /
• v.18 no.3
• /
• pp.139-144
• /
• 1988

Piperacillin phthalidyl ester was synthesized by reacting piperacillin with triethylamine and bromophthalide in acetone and its chemical structure was determined by UV, IR, and PMR. The partition coefficient of the ester was increased and the ester was more lipophilic and less water soluble than piperacillin. The ester did not show the antimicrobial activity against Bacillus subtilis ATCC 6633 in vitro, but when hydrolyzed, the parent drug of ester, piperacillin, revealed antimicrobial activity in vivo. After a single oral dose of both piperacillin and the ester to rabbits, the serum piperacillin concentration was measured by bioassay. The ester exhibited improved pharmatokinetic characteristics: $T_{max}\;of\;2hr,\;C_{max}\;of\;4.26{\mu}g{\cdot}ml^{-1},K_{el}\;of\;0.057hr^{-1},\;and\;total\;AUC\;of\;85.42{\mu}g{\cdot}hr{\cdot}ml^{-1}$. Piperacillin on the other hand, did not exhibit any gastro-intestinal absorption.

• Korean Chemical Engineering Research
• /
• v.47 no.4
• /
• pp.410-417
• /
• 2009

Carbon dioxide was absorbed into GMA solution in a stirred flat cell using mesoporous catalyst Imidazole-CP-MS41, which was synthesized by CP-MCM41 with imidazole. Experiments were carried out at a batch-type absorber with different conditions, varying reaction temperature, concentration of GMA, solvent but maintaining 50 rpm of agitation speed and 2 g of catalyst. Absorption rate of $CO_2$ was used to obtain the kinetics based on the film theory using zwitterion mechanism with 2 elementary reaction and the kinetics were correlated with the solubility parameter of the solvents.

• Polymer(Korea)
• /
• v.24 no.1
• /
• pp.23-28
• /
• 2000

Autoadhesion strength of PS/PS Interfaces in solvent welding was determined as a function of processing conditions by butt joint test. It was verified that the chain mobility and surface roughness at PS/PS interface were enhanced by the applied solvent having a similar solubility parameter as PS and resulted in the dramatic improvement of autoadhesion strength at PS/PS interface. It was found that the mechanism of solvent welding is dependent upon the chain mobility due to the diffusion of solvent to PS interface and the contact area at interface. When the welding temperature is lower than the boiling point of applied solvent, the effect of chain mobility on autoadhesion strength was dominated, while contact area took more important role when welding temperature is above the boiling point of solvent. Autoadhesion strength increased with increasing contact time and contact temperature but :he effect of solvent on autoadhesion strength became smaller.

• Korean Chemical Engineering Research
• /
• v.47 no.3
• /
• pp.380-385
• /
• 2009

The absorption rate of carbon dioxide with 2-amino-2-methyl-1-propanol(AMP) was measured in such non-aqueous solvents as methanol, ethanol, n-propanol, n-butanol, ethylene glycol, propylene glycol, and propylene carbonate, and in water at 298 K and 101.3 kPa using a semi-batch stirred tank with a plane gas-liquid interface. The overall reaction rate constant, obtained under the condition of fast reaction regime, from the measured rate of absorption was used to get the elementary reaction rate constants in complicated reactions represented by reaction mechanism of carbamate formation and the order of overall reaction of $CO_2$ with amine. The correlation between the elementary reaction rate constant and the solubility parameter of the solvent was also presented.

• Korean Journal of Food Science and Technology
• /
• v.2 no.2
• /
• pp.49-55
• /
• 1970

In preparation of textured soybean protein, drying process of the isolated protein affected its gelling property and other related characteristics such as water holding capacity and viscosity. In model systems, denaturation of the protein, as determined in terms of nitrogen solubility index (NSI), was appeared to be a parameter of the gel strength of soybean protein isolate. The gel strength was maximum when the protein was denatured properly during drying process of which the NSI was 43 in this experiment and decreased at either the higher or the lower NSI. It indicated that proper denaturation of the protein during drying operation is advantagous for the preparation of textured soybean protein but not neccesary to make highly undenatured one.

• Journal of the Korean Chemical Society
• /
• v.39 no.1
• /
• pp.76-80
• /
• 1995

Polydimethylsiloxane(PDMS)-co-poly(2-hydroxyethyl methacrylate)(PHEMA) was prepared and the degree of swelling of solvents into the polymers was examined. It was confirmed that the solubility parameter of PHEMA homopolymer is 26 (J/cm3)1/2. Ethanol was significantly absorbed into copolymers containing large amount of PHEMA, while tetrahydrofuran was effectively absorbed into copolymers containing large amount of PDMS. Absorption of polar solvents into the copolymers were increased with the increase of PDMS content. The model drug, crystal violet (CV), was more absorbable into PDMS-HPEMA copolymers than PHEMA homopolymer. Absorption of CV was decreased with the increase of PDMS content of the copolymers.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.7
• /
• pp.2713-2718
• /
• 2010

To improve the CNT's dispersion, we tried to chemically modify the surface of MWNT with the butyllithium and the hexyllithium solution in sonicated reactor. The functionalized-MWNTs were characterized by Fourier transform infrared spectrometer(FT-IR) and Raman spectrophotometer. Also, we investigated the amount of alkyl moiety incorporated into MWNT's surface with Thermal gravimetric analyzer(TGA) and dispersibility in various organic solvents. Finally, we could find organic content was about 5% of the functionalized MWNT and dispersibility was enhanced in some solvents having intermediate solubility parameter.

• Journal of the Korean Applied Science and Technology
• /
• v.19 no.2
• /
• pp.79-85
• /
• 2002

The cutaneous tolerability of detergent formulations can be improved by means of suitable additives. They complex the surfactant molecules lowering the concentration of their free monomeric species. Proteins derivatives used as additives for detergency are usually prepared by partial hydrolysis of plant reserve proteins. The main purpose of the hydrolytic cleavage is to make them water soluble and suitable for liquid products. Water solubility and stability are obtained by means of complexation with surfactants which also increase their actual hydrophobicity, an important parameter affecting cosmetic properties of proteins. Transepidermal water loss (TEWL) and electric capacitance (EC) have been adopted as investigation technigues to evaluate the skin integrity/damage in vitro tests, The performance of native wheat protein / surfactant complexes has been compared with traditional protein hydrolysates as detergent additives. The results show a noticeable reduction of skin irritation in surfactant formulations with addition of native wheat protein.

• Prospectives of Industrial Chemistry
• /
• v.23 no.5
• /
• pp.21-32
• /
• 2020

유기전자소자는 용액공정을 통한 대량생산이 가능하기 때문에 기존 무기전자소자에 비해 제조비용이 저렴하고 대면적 생산이 가능하며, 유기분자의 본연 특징으로 인해 유연하고 가벼운 소자를 구현할 수 있다. 그러나 무기 반도체에 비하여 현저히 낮은 전하이동도 특성은 유기전자소자의 상용화에 걸림돌이 되고 있다. 따라서 공액고분자의 결정화도, 모폴로지, 분자배향 최적화를 통한 자기조립 박막 제조는 전하이동을 원활히 하기 때문에 유기전자소자의 개발에 필수적이다. 본 기고에서는 유기전자소자의 활성층으로 사용되는 공액고분자의 자기조립을 유도하기 위한 다양한 특성을 갖는 용매 첨가제의 효과에 대해서 알아보고, 특히 첨가제의 용해도 계수가 공액고분자의 자기조립 거동에 미치는 영향에 대해 자세히 논의하고자 한다.