• Bulletin of the Korean Chemical Society
• /
• 제30권12호
• /
• pp.2935-2937
• /
• 2009

Asymmetric glycolate alkylation reactions in the solid phase were investigated for the first time with good stereoselectivities being obtained by using a Wang resin supported 2-imidazolidinone chiral auxiliary.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(I)
• /
• pp.532-535
• /
• 1987

A laser interferometry of very high spatial resolution was built to study the solid phase epitaxial regrowth of furnace-annealed silicon wafers. As boron concentration increases up to $1.0E20/cm^3$, regrowth rate increases, but pre-exponential term and activation energy are decreased.

• Archives of Pharmacal Research
• /
• 제27권1호
• /
• pp.25-30
• /
• 2004

Combinatorial homoserine lactone mixtures and individual products were obtained from the methionine-functionalized resin in solid-phase synthesis. The four-step process consisting of a coupling step of an N-Fmoc-L-methionine, deprotection of N-Fmoc group, N-coupling with a carboxylic acid, and cleavage reaction through a polymer supported strategy is described. Gas chromatography-mass selective detector (GC-MSD) techniques provide the most powerful methods for identifying both the combinatorial mixtures and individual products.

• Archives of Pharmacal Research
• /
• 제27권4호
• /
• pp.371-375
• /
• 2004

The silicon linker is the foremost traceless linker used in solid-phase reactions. Hydrogen fluo-ride (HF) or trifluoroacetic aicd (TFA) can remove the silicon linker with the silicon atom being replaced by a hydrogen atom. In this experiment, the linkers 1c and 2d, which are the most useful in solid-phase reactions, were synthesized, Linker 1c is composed of seven linearly linked carbons and linker 2d includes an oxygen atom in the linear carbon chain to increase the solvation capacity. The carboxylic acid component of linker 1c and 2d forms an amide or ester bond with resin. The synthesized linkers 1c and 2d could be utilized in constructing a chemical compound library that includes indole, benzodiazepine and phenothiazine (aromatic ring compounds).

• 한국식품영양학회지
• /
• 제12권2호
• /
• pp.119-123
• /
• 1999

Test of the optimum condition of solid phase micro extraction(SPME) was performed by use of 5 vol-atile components in dilute aqueous solution. Volatile components of Sancho(Zanthoxylum schinifolium) were isolated by SPME method and were analyzed by GC/MSD and compared with volatile compone-nts isolated by simultaneous distillation extraction (SDE) method. Total 31 components were identified by comparing gas chromatography retention time and mass spectral data. The major compounds were limonene geranyl acetate $\beta$-phellandrene phellandral mycene linalool rose oxide caproic acid and caprylic acid SPME sampling procedure was found to be a good method for qualitative analysis of the volatile components.

• Macromolecular Research
• /
• 제13권3호
• /
• pp.253-256
• /
• 2005

We prepared amino acid-derived diacetylene monomers using solid-phase organic synthesis. The solid-phase synthetic method allowed for the rapid and efficient preparation of functional diacetylenes. Amino acids having hydrophobic sidechains such as alanine, leucine, and phenylalanine, as well as hydrophilic sidechains such as aspartic acid and lysine, were successfully coupled to the diacetylene lipid. The diacetylene monomers prepared in this way were subjected to routine procedures for the generation of polydiacetylene vesicles. Depending on the nature of the side-chains, pink to blue colored polydiacetylenes were generated.

• Bulletin of the Korean Chemical Society
• /
• 제10권1호
• /
• pp.19-22
• /
• 1989

The suitability of BMPI (2-bromo-N-methyl pyridinium iodide) for solid-phase peptide synthesis was investigated. The coupling rate of BMPI/HOBT procedure. BMPI/HOBT was superior to DCC/HOBT couplings using the solid-phase peptide bond formation proceeded to a greater degree of completion than DCC/HOBT method did. Double couplings with 2 equiv. of Bocamino acids and 1.5 equiv. of BMPI and $NEt_3$ and 2 equiv. of HOBT in DMF/MC (1:1 v/v) gave the best result for the preparation of a model compound. Stepwise solid phase peptide synthesis using BMPI/HOBT procedure was successfully utilized for the preparation of $(D-Ala)^2$-dynorphine A. BMPI/HOBT procedure for the synthesis of $(D-Ala)^2$-dynorphine gave better yield (20%) than DCC/HOBT procedure did.

• Bulletin of the Korean Chemical Society
• /
• 제24권3호
• /
• pp.389-392
• /
• 2003

• 소성∙가공
• /
• 제7권4호
• /
• pp.364-374
• /
• 1998

It is the objective of this study to analyze the effect of various process variables on the quality of extruded product and extrusion force for semi-solid extrusion of Al2024 with solid phase structure of globular type by the finite element method. Process variables are initial solid fraction, ram speed, semi-angle of die, and reduction in area. The results of experiment are compared with those of simulation in order to verify the usefulness of the developed finite element program. The flow and deformation of semi-solid alloy are analyzed by coupling by coupling the deformation of porous skeleton and the flow of liquid phase. It is also assumed that initial solid fraction is homogeneous.

• KSBB Journal
• /
• 제21권2호
• /
• pp.133-139
• /
• 2006

혈액 내 순환시 안정성 향상과 면역원성의 감소를 위해, rhIFN-${\alpha}$-2a은 N-terminus의 ${\alpha}$-아민기에 mPEG aldehyde를 solid-phase PEGylation 시킨다. CM-Sepharose와 같은 양이온 교환수지가 고체 지지체로 사용되었다. Mono-PEGylate는 양이온 교환 수지에서 unmodified 단백질과 분리되어 용출된다. Site-srecific PEGylation과 mono-PEGylate의 분리가 한 단계의 공정으로 얻어진다는 점은 solid-phase PEGylation의 이점을 뒷받침해준다. 위치 특이성은 peptide digest의 질량 분석과 Edman degradation을 이용한 N-terminal sequencing에 의해 확인하였다. Mono-PEGylate는 항바이러스 활성과 면역원성의 감소를 나타내고, 감소 정도는 결합되는 mPEG의 분자량에 비례한다. Trypsin 저항성과 온도 안정성은 mono-PEGylation에 의해 두드러지게 개선되었다. Solid-phase PEGylation을 통해 종래의 액상 반응에서 나타날 수 있는 재현성 낮은 반응, 부 반응물 생성, 부 반응물 제거 공정 등의 단점을 극복할 수 있었다. 그러나 solid-phase PEGylation의 문제점인 액상 반응에 비교하여 많은 양의 PEG를 사용하여야 한다는 점은 개선되어야 한다.