• Bulletin of the Korean Chemical Society
• /
• v.31 no.7
• /
• pp.1887-1890
• /
• 2010

Cross-linked polystyrene supported aluminium triflate (Ps-Al(OTf)$_3$) was found to be an efficient and chemoselective heterogeneous Lewis acid catalyst for the direct conversion of arenes to sulfones using sulfonic acids as sulfonylating agents. The solid acid catalyst is stable (as a bench top catalyst) and can be easily recovered and reused without appreciable change in its efficiency.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.541-543
• /
• 2006

The feasibility of biodiesel production from soapstock by acid catalyst was tested. The water content of soapstock was more than 40%. Before the esterification of soapstock, the pre-treatment of soapstock was conducted adding potassium hydroxide and sulfuric acid. The pre-treated soapstock contained 99.6wt% of free fatty acid. When the free fatty acid was esterified with methanol, the fatty acid methyl ester content became 91.7wt% under the solid acid catalyst, Amberlyst-15. When this biodiesel was distilled the methyl ester content was 98.1wt% which satisfied the biodiesel Standard. Amberlyst-15 could be recovered easily because it was the soliid catalyst. When sulfuric acid was used as the acid catalyst, the fatty acid methyl ester content was 91.0wt%. From the results, it was possible to produce biodiesel efficiently from soapstock after pre-treatment. Because soapstock is very cheap, it will become good feedstock for biodiesel product ion.

• Journal of Industrial Technology
• /
• v.29 no.A
• /
• pp.89-94
• /
• 2009

The efficiency of heterogeneous catalysts has been investigated in ozonation process for organic removal. Heterogeneous catalytic ozonation was conducted for the degradation of humic acid in the presence of Granular Activated Carbon or Zeolite as a solid catalyst. And the results were compared to those of ozonation alone and adsorption alone without ozonation. The degradation characteristics of humic acid in each process were examined with the values of pH, TOC, $UV_{254}$ and $COD_{Cr}$.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.3
• /
• pp.263-266
• /
• 2001

Isopropylation of phenol with 2-propanol has been carried out over Na-exchanged ZSM-5 zeolites to determine the effect of catalyst acidity on phenol conversion and product selectivity. The acid type and strength of the catalyst such as Lewis, weak and strong Bronsted acid sites are measured by pyridine adsorbed XPS and the catalytic properties are interpreted in terms of the acid properties. The active site and mechanism for the reaction are suggested based on evidence of study from the reactant adsorbed FT-IR.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.4
• /
• pp.1279-1284
• /
• 2012

Silica supported $Cs_{2.5}H_{0.5}PMo_{12}O_{40}$ catalyst was prepared through sol-gel method with ethyl silicate-40 as silicon resource and characterized by X-ray diffraction, infrared spectroscopy, scanning electron microscopy, nitrogen adsorption-desorption and potentiometric titration methods. The $Cs_{2.5}H_{0.5}PMo_{12}O_{40}$ particles with Keggin-type structure well dispersed on the surface of silica, and the catalyst exhibited high surface area and acidity. The catalytic performance of the catalysts for benzene liquid-phase nitration was examined with 65% nitric acid as nitrating agent, and the effects of various parameters were tested, which including temperature, time and amount of catalyst, reactants ratio, especially the recycle of catalyst was emphasized. Benzene was effectively nitrated to mononitro-benzene with high conversion (95%) in optimized conditions. Most importantly, the supported catalyst was proved has excellent stability in the nitration progress, and there were no any other organic solvent and sulfuric acid were used in the reaction system, so the liquid-phase nitration of benzene that we developed was an eco-friendly and attractive alternative for the commercial technology.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.11
• /
• pp.3213-3218
• /
• 2014

A metal organic framework-supported Nickel nanoparticle (Ni-MOF-5) was successfully synthesized using a simple impregnation method. The obtained solid acid catalyst was characterized by Powder X-ray diffraction (XRD), scanning electron microscopy (SEM), nitrogen adsorption-desorption and thermogravimetric analysis (TGA). The catalyst was highly crystalline with good thermodynamic stability (up to $400^{\circ}C$) and high surface area ($699m^2g^{-1}$). The catalyst was studied for the oxidation of ethyl benzene, and the results were monitored via gas chromatography (GC) and found that the Ni-MOF-5 catalyst was highly effective for ethyl benzene oxidation. The conversion of ethyl benzene and the selectivity for acetophenone were 55.3% and 90.2%, respectively.

• Korean Journal of Materials Research
• /
• v.33 no.7
• /
• pp.265-272
• /
• 2023

In this study, the synthesis of nitrobenzene was carried out using sulfated silica catalyst. The study delved into H₂SO₄/SiO₂ as a solid acid catalyst and the effect of its weight variation, as well as the use of a microwave batch reactor in the synthesis of nitrobenzene. SiO₂ was prepared using the sol-gel method from TEOS precursor. The formed gel was then refluxed with methanol and calcined at a temperature of 600 ℃. SiO₂ with a 200-mesh size was impregnated with 98 % H₂SO₄ by mixing for 1 h. The resulting 33 % (w/w) H₂SO₄/SiO₂ catalyst was separated by centrifugation, dried, and calcined at 600 ℃. The catalyst was then used as a solid acid catalyst in the synthesis of nitrobenzene. The weights of catalyst used were 0.5; 1; and 1.5 grams. The synthesis of nitrobenzene was carried out with a 1:3 ratio of benzene to nitric acid in a microwave batch reactor at 60 ℃ for 5 h. The resulting nitrobenzene liquid was analyzed using GC-MS to determine the selectivity of the catalyst. Likewise, the use of a microwave batch reactor was found to be appropriate and successful for the synthesis of nitrobenzene. The thermal energy produced by the microwave batch reactor was efficient enough to be used for the nitration reaction. Reactivity and selectivity tests demonstrated that 1 g of H₂SO₄/SiO₂ could generate an average benzene conversion of 40.33 %.

• Applied Chemistry for Engineering
• /
• v.3 no.1
• /
• pp.7-17
• /
• 1992

The acid stronger than $H_0=-11.93$, which corresponds to the acid strength of 100% $H_2SO_4$, is known as superacid. However, solid superacid catalysts have many advantages such as an easy separation of products from catalyst, the repeated uses and regeneration of catalysts, as compared with liquid superacids. In this paper, the kinds of solid superacids, the preparation methods, and their applications for chemical reactions are introduced.

• Journal of Microbiology and Biotechnology
• /
• v.28 no.5
• /
• pp.732-738
• /
• 2018

Novel carbon-based solid acid catalysts were synthesized through a sustainable route from lipid-extracted microalgal residue of Dunaliella tertiolecta, for biodiesel production. Two carbon-based solid acid catalysts were prepared by surface modification of bio-char with sulfuric acid ($H_2SO_4$) and sulfuryl chloride ($SO_2Cl_2$), respectively. The treated catalysts were characterized and their catalytic activities were evaluated by esterification of oleic acid. The esterification catalytic activity of the $SO_2Cl_2$-treated bio-char was higher ($11.5mmol\;Prod.{\cdot}h^{-1}{\cdot}gCat.\;^{-1}$) than that of commercial catalyst silica-supported Nafion SAC-13 ($2.3mmol\;Prod.{\cdot}h^{-1}{\cdot}gCat.^{-1}$) and $H_2SO_4$-treated bio-char ($5.7mmol\;Prod.{\cdot}h^{-1}{\cdot}gCat.^{-1}$). Reusability of the catalysts was examined. The catalytic activity of the $SO_2Cl_2$-modified catalyst was sustained from the second run after the initial activity dropped after the first run and kept the same activity until the fifth run. It was higher than that of first-used Nafion. These experimental results demonstrate that catalysts from lipid-extracted algae have great potential for the economic and environment-friendly production of biodiesel.

• Korean Journal of Materials Research
• /
• v.34 no.5
• /
• pp.223-234
• /
• 2024

This review explores the potential of pillared bentonite materials as solid acid catalysts for synthesizing diethyl ether, a promising renewable energy source. Diethyl ether offers numerous environmental benefits over fossil fuels, such as lower emissions of nitrogen oxides (NO_x) and carbon oxides (CO_x) gases and enhanced fuel properties, like high volatility and low flash point. Generally, the synthesis of diethyl ether employs homogeneous acid catalysts, which pose environmental impacts and operational challenges. This review discusses bentonite, a naturally occurring alumina silicate, as a heterogeneous acid catalyst due to its significant cation exchange capacity, porosity, and ability to undergo modifications such as pillarization. Pillarization involves intercalating polyhydroxy cations into the bentonite structure, enhancing surface area, acidity, and thermal stability. Despite the potential advantages, challenges remain in optimizing the yield and selectivity of diethyl ether production using pillared bentonite. The review highlights the need for further research using various metal oxides in the pillarization process to enhance surface properties and acidity characteristics, thereby improving the catalytic performance of bentonite for the synthesis of diethyl ether. This development could lead to more efficient, environmentally friendly synthesis processes, aligning with sustainable energy goals.