• 제목/요약/키워드: Solid environmental samples

검색결과 243건 처리시간 0.027초

Assessment of Water Pollution by the discharged water of the Abandended Mine

  • Kim, Hee-Joung;Yang, Jae-E.;Lee, Jai-Young;Park, Beang-Kil;Choi, Sang-Il;Jun, Sang-Ho
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2004년도 총회 및 춘계학술발표회
    • /
    • pp.167-174
    • /
    • 2004
  • Several metalliferous and coal mines, including Myungjin, Seojin and Okdong located at the upper watershed of Okdong stream, were abandoned or closed since 1988 due to the mining industry promotion policy and thus disposed an enormous amount of mining wastes without a proper treatment facilities, resulting in water pollution in the downstream areas. AMD and waste effluents from the closed coal mines were very strongly acidic showing pH ranges of 2.7 to 4.5 and had a high level of total dissolved solid (TDS) showing the ranges of 1,030 to 1,947 mg/L. Also heavy metal concentrations in these samples such as Fe, Cu, Cd and anion such as sulfate were very high. These parameters of AMD and effluents were considered to be highly polluted as compared to those in the main stream area of the Okdong river and be major pollutants for water and soil in tile downstream area. Pollution indices of the surface water at the upper stream of Okdong river where AMD of the abandoned coal mines was flowed into main stream were in the ranges of 16.3 to 47.1. On the other hand, those at the mid stream where effluents from tailing dams and coal mines flowed into main stream were in tile ranges of 10.6 to 19.5. However, those at the lower stream were ranged from 10.6 to 14.9 These results indicated that mining wastes such as AMD and effluents from the closed mines were tile major source to water pollution at the Okdong stream areas.

  • PDF

Toward high recovery and selective leaching of zinc from electric arc furnace dust with different physicochemical properties

  • Lee, Han Saem;Park, Da So Mi;Hwang, Yuhoon;Ha, Jong Gil;Shin, Hyung Sang
    • Environmental Engineering Research
    • /
    • 제25권3호
    • /
    • pp.335-344
    • /
    • 2020
  • This work describes highly efficient recovery and selective leaching of Zn from electric arc furnace dust (EAFD) with different physicochemical properties, induced by acid leaching at ambient conditions. The chemical compositions, mineralogical phases, and particle sizes of the EAFDs were analyzed and compared. The effects of leaching time, liquid/solid ratio, acid type, and acid concentration on the selective leaching of Zn were also studied. The EAFD with high Fe/Zn ratio (> 1, EAFD3) was richer in ZnFe2O4 and exhibited larger particle size than samples with low Fe/Zn ratio (< 1, EAFD1,2). ANOVA analysis revealed that the Fe/Zn ratios of the EAFDs also have a significant effect on Zn extraction (p < 0.005). Selective leaching of Zn with minimum Fe dissolution was obtained at pH > 4.5, regardless of other parameters or sample properties. The maximum Zn extraction rate obtained by the pH control was over 97% for EAFD1 and EAFD2, 76% for EAFD3, and 80% for EAFD4. The present results confirm that the Fe/Zn ratio can be used to identify EAFDs that permits facile and high-yield Zn recovery, and pH can be used as a process control factor for selective leaching of Zn regardless of any differences in the properties of the EAFD sample.

기체 크로마토그래피/질량분석기를 이용한 종이류 중 알킬페놀류, 클로로페놀류 및 비스페놀 A 정량 (Sensitive Determination of Alkylphenols, Chlorophenols, and Bisphenol A using GC/MS-SIM in Paper Materials)

  • 김협;김진호
    • Environmental Analysis Health and Toxicology
    • /
    • 제18권1호
    • /
    • pp.45-55
    • /
    • 2003
  • The alkylphenols, chlorophenols and bisphenol A were determined by gas chromatography/mass spectrom-etry-selected ion monitoring (GC/MS-SIM) mode followed by two work-up methods for comparison; isoBOC derivatization method and TBDMS derivatization method. Eleven phenols in paper samples were extracted with acetonitrile. Also, solid -phase extraction (SPE) with XAD -4 and subsequent conversion to isobutoxycarbonyl derivatives or tert.-butyldimethylsilyl derivatives for sensitive analysis with the selected ion-monitoring (SIM) mode. The SIM responses were linear with the correlation coefficient varying 0.9717 ∼ 0.9995 (isoBOC derivatization), and 0.9842 ∼ 0.9980 (TBDMS derivatization). The recoveries were 82.4 ∼ 108.8%) by area ratio of phenanthrene -d$\_$10/ vs bisphenol A-d$\^$l6/. (isoBOC derivatization and TBDMS derivatization) The range of concentrations was respectively, 0.95 ∼ 1.44 ng/g in 2,4-dichlorophenol, 1.01 ∼ 1.17 ng/g in t-butylphenol,2.17 ∼ 5.84 ng/g in pentachlorophenol, 12.68 ∼ 14.88 ng/g in nonylphenol and 30.84 ∼ 153.72 ng/g in bisphenol A.

중금속으로 오염된 토양 정화에 있어 폐 소뼈 첨가제의 영향 (Stabilization of Heavy Metal Contaminated Soil Amended with Waste Cow Bone)

  • 임정현;최명찬;문덕현;김지형
    • 한국환경과학회지
    • /
    • 제19권2호
    • /
    • pp.255-260
    • /
    • 2010
  • A stabilization/solidification (S/S) process for lead (Pb) contaminated soils was evaluated using waste cow bone containing apatite like compounds. Soil samples obtained form firing range were treated with waste cow bone. The effectiveness of stabilization was evaluated based on the Korean Standard Leaching Test (KSLT) and soil pH. The leached concentration reduced with increased in dose of waste cow bone. Overall, the KSLT results showed that Pb concentration in soils are significantly affected by amount of waste cow bone. When soil amended with 20 % of waste cow bone, less than 0.1 mg/kg was leached, and soil pH was increased from 6.5 to 8.4. Same results were obtained when finer waste cow bone was applied. The reachable concentration of Pb in soil showed in inversely proportional to solid/liquid ratio. Aging periods indicate improving mix design was applied. Relatively high lead concentrations was observed at the first 1 days, however leaching profile are reduced significantly over time for all mix designs.

하수 중 인의 결합 특성 분석 (Analysis of Characteristics of Coupled Phosphorus in the Sewage)

  • 최희정;이승목
    • 한국물환경학회지
    • /
    • 제23권1호
    • /
    • pp.97-102
    • /
    • 2007
  • The present investigation deals to achieve an accurate determination of the phosphorous present in the wastewater samples using the membrane reactor. The study may enable to quantify the dissolved (DP) and adsorbed phosphorous (AP), also the adsorbed phosphorous categorically identified as inorganic coupled phosphorous (DRP) and organic coupled phosphorous (NRP). Moreover, the study has been conducted separately in anaerobic and aerobic chamber. The results obtained showed that dissolved phosphorous only can occur in anaerobic chamber with ca. 25%. The study conducted for adsorbed phosphorous showed that the DRP has the percent composition in anaerobic and aerobic chamber respectively 33% and 40% i.e., 7% more in aerobic chamber. The similar values obtained for NRP was found to be 42% and 60% i.e., 18% more in aerobic chamber. On the other hand while comparing the results for NRP and DRP, it has to be noted that NRP has 9% and 20% more percent composition than DRP respectively in anaerobic and aerobic chamber. Further, the adsorbed phase showed the species Al-P, Fe-P in the aerobic chamber with the quotient of 7.73 mg/g TS (total solid) whereas in the anaerobic chamber it showed the species Fe-P and $Fe(OH)_3$-P with the 7.16 mg/g TS.

Removing nitrogenous compounds from landfill leachate using electrochemical techniques

  • Nanayakkara, Nadeeshani;Koralage, Asanga;Meegoda, Charuka;Kariyawasam, Supun
    • Environmental Engineering Research
    • /
    • 제24권2호
    • /
    • pp.339-346
    • /
    • 2019
  • In this research, applicability of electrochemical technology in removing nitrogenous compounds from solid waste landfill leachate was examined. Novel cathode material was developed at laboratory by introducing a Cu layer on Al substrate (Cu/Al). Al and mild steel (MS) anodes were investigated for the efficiency in removing nitrogenous compounds from actual leachate samples collected from two open dump sites. Al anode showed better performances due to the effect of better electrocoagulation at Al surface compared to that at MS anode surface. Efficiency studies were carried out at a current density of $20mA/cm^2$ and at reaction duration of 6 h. Efficiency of removing nitrate-N using Al anode and developed Cu/Al cathode was around 90%. However, for raw leachate, total nitrogen (TN) removal efficiency was only around 30%. This is due to low ammonium-N removal as a result of low oxidation ability of Al. In addition to the removal of nitrogenous compounds, reactor showed about 30% removal of total organic carbon. Subsequently, raw leachate was diluted four times, to simulate pre-treated leachate. The diluted leachate was treated and around 88% removal of TN was achieved. Therefore, it can be said that the reactor would be good as a secondary or tertiary treatment step in a leachate treatment plant.

환경샘플 내 화학작용제 및 분해물질 분석을 위한 Liquid Phase Microextraction (LPME) 전처리 기법 (Liquid-phase Microextraction Pretreatment Techniques for Analysis of Chemical Warfare Agents and Their Degradation Byproducts in Environmental Aqueous Samples)

  • 김동욱;정우영;계영식
    • 공업화학
    • /
    • 제26권1호
    • /
    • pp.17-22
    • /
    • 2015
  • 2013년 시리아 내전 간 사용되어 1,300명 이상의 사망자를 발생시킨 사린(GB) 등의 화학무기로 인해 화학무기에 대한 국제적 관심이 다시 한번 높아지게 되었다. 화학작용제는 자연환경에 노출이 되면 가수분해(hydrolysis) 또는 광분해(photodegradation) 과정을 거쳐 분해물질로 분해된다. 화학작용제 및 분해물질(가수분해 또는 산화된 생성물)은 통상수 ppb 정도의 낮은 농도로 존재하기 때문에 정확한 샘플분석을 위해서는 화학작용제 및 분해물질을 환경샘플로부터 분리, 추출, 농축시키는 전처리 과정이 필요하다. 용매추출법(LLE), 고체상 추출법(SPE) 등이 화학작용제의 전처리 방법으로 많이 사용되나 최근에는 사용되는 용매의 양은 줄이면서 분석효율은 높일 수 있는 liquid phase microextraction (LPME)이 개발 적용되고 있다. 본 리뷰에서는 화학작용제 및 그 분해물질의 전처리에 활용된 LPME 전처리 기법에 대해 살펴보고자 한다.

공기중 이소시아네이트류의 측정 및 분석방법에 관한 비교연구 (A Comparison of Sampling and Analytical Methods for Airborne Isocyanates)

  • 변혜정;윤충식;백남원
    • 한국환경보건학회지
    • /
    • 제22권2호
    • /
    • pp.32-42
    • /
    • 1996
  • This study was performed to evaluate accuracy and precision of filter method and impinger method for analyzin airborne isocyanates in mixture (2, 6-TDI, HDI, 2, 4-TDI, MDI). Filter method was performed using the OSHA Method 42 and impinger method using the NIOSH Method 5521. The samples were analyzed by high performance liquid chromatography-ultraviolet detector (HPLC-UVD). After the optimum operating conditions for each method were investigated, samples with various concentration levels were quantified at the conditions. The precision was expressed by the pooled coefficient of variation(C.V.) and the accuracy by overall accuracy. The results are summarized as follows: 1. The optimum condition of filter method was determined at 35/65 ACN/buffer (0.01 M ammonium acetate) in mobile phase. And in case of impinger method, it was at 30/70 ACN/buffer(0.2 M sodium acetate). The effect of concentrations of acetate on the separation of the peaks was not significant, but, the effect of ACN/buffer ratio was significant. 2. The correlation coefficients for the two methods were above 0.9 in all isocyanate compounds. Average recovery efficiencies for 2, 6-TDI, HDI, 2, 4-TDI and MDI in filter method were 92.4%, 102.6%, 87.3% and 101.0%, respectively. Those in impinger method were 106.6%, 106.7%, 99.0% and 103.6%, respectively. As a result, the recovery efficiency of impinger method was higher than those of filter method in analyzing isocyanate compounds. 3. The pooled coefficients of variations of the methods were slightly higher than expected. The overall accuracies of the methods were within $\pm 25%$ for each isocyanate compound. Since these results satisfy NIOSH criteria, the accuracy of the experiment is appropriate. 4. As seen above, impinger method is more efficient than filter method. But, there are many disadvantages in impinger method. Therefore, solid sorbent such as a glass fiber filter must be developed in order to have the high efficiency not less than that of impinger method in the future.

  • PDF

건설폐토석의 식생용토로서의 이화학적 특성 (Physico-Chemical Properties of the Recycled Waste Soils from Construction Site as Planting Soil)

  • 김원태;윤용한;박봉주
    • 한국환경복원기술학회지
    • /
    • 제10권5호
    • /
    • pp.31-39
    • /
    • 2007
  • This study was carried out to evaluation the recycled waste soils from construction site for planting soil. For this purpose, the concentrations of polluted materials and the physico-chemical properties were measured at recycled soil samples of an industrial waste treating company in the Metropolitan landfill area. The concentrations of polluted materials did not exceed to the standard critical levels of soil pollution in all analyzed items. The measures of the samples soil texture (loamy sand), bulk density (1.09~1.32g/$cm^3$), saturated hydraulic conductivity ($1.6{\times}10^{-3}{\sim}1.8{\times}10^{-3}$cm/sec), solid phase distribution (0.4~0.5$m^3/m^3$), porosity (0.5~0.6$m^3/m^3$), Ex. $K^+$ (1.0~1.2cmol/kg), Ex. $Mg^{2+}$ (0.2~0.6cmol/kg) were identified as not worse than those of conventional planting soil. But the sample soils have serious problems for planting soil such as high levels of pH (9.6~11.5), EC (0.78~1.84ds/m) and Ex. $Ca^{2+}$ (25.6~34.5cmol/kg), low level of organic matter (0.2~0.3%). It is required to improve pH, EC and Ex. $Ca^{2+}$ of sample soils. Consequently, the results suggested a high potential of recycling of the wastes soils for planting soil.

제주도(濟州道) 연안(沿岸) 해양(海洋) 중(中) benomyl의 잔류(殘留) (Residue of benomyl in the coastal environment on the Cheju island)

  • 김정호;서승교;오윤근
    • 농약과학회지
    • /
    • 제3권1호
    • /
    • pp.51-56
    • /
    • 1999
  • Benzimidazole계 농약인 benomyl네 의한 제주도연안 해양오염을 규명하고자, 1996년 5월, 8월, 10월에 제주시와 서귀포시 근해 해양 환경시료에서 benomyl 잔류량을 조사하였다. Benomyl은 자연계에서 주로 carbendazim (methyl 2-benzimidazolecarbamate)으로 빠르게 변환되고 대사 되기 때문에 carbendazim 잔류량을 benomyl 잔류량으로 하였다. UV-HPLC에 의한 benomyl의 최소검출농도는 해수 중에서 $0.2{\mu}g/L$이었고, 저니토, 우뭇가사리, 미역, 소라, 성게 등 고체시료는 $0.4{\mu}g/kg$이었다. 모든 시료의 해수와 저니토에서 benomyl은 검출되지 않았다. 또한 우뭇가사리와 미역, 소라, 성게의 모든 시료에서 benomyl이 불검출 되었다. 이는 농약살포기인 5월, 8월과 농약 비살포기인 10월에도 같은 결과였다. 또한 감귤농업을 상대적으로 적게 하는 북제주도의 제주시부근 뿐만 아니라, 감귤농업을 많이 하는 남제주도의 위미연안에서도 benomyl이 검출되지 않았다. 따라서 benomyl에 의한 제주도 연안 해양환경의 오염은 없는 것으로 나타났다.

  • PDF