• Korean Chemical Engineering Research
• /
• v.51 no.4
• /
• pp.443-454
• /
• 2013

Various metal ions (transition and base metals) incorporated MCM-41 catalysts can be synthesized using colloidal and soluble silica with non-sodium involved process. Transition metal ion-typically $V^{5+}$, $Co^{2+}$, and $Ni^{2+}$-incorporated MCM-41 catalysts were synthesized by isomorphous substitution of Si ions in the framework. Each incorporated metal ion created a single species in the silica framework, single-site solid catalyst, showing a substantial stability in reduction and catalytic activity. Radius of pore curvature effect was investigated with Co-MCM-41 by temperature programmed reduction (TPR). The size of metallic Co clusters, sub-nanometer, could be controlled by a proper reduction treatment of Co-MCM-41 having different pore size and the initial pH adjustment of the Co-MCM-41 synthesis solution. These small metallic clusters showed a high stability under a harsh reaction condition without serious migration, resulting from a direct anchoring of small metallic clusters to the partially or unreduced metal ions on the surface. After a complete reduction, partial occlusion of the metallic cluster surface by amorphous silica stabilized the particles against aggregations. As a probe reaction of particle size sensitivity, carbon single wall nanotubes (SWNT) were synthesized using Co-MCM-41. A metallic cluster stability test was performed by CO methanation using Co- and Ni-MCM-41. Methanol and methane partial oxidations were carried out with V-MCM-41, and the radius of pore curvature effect on the catalytic activity was investigated.

• Membrane Journal
• /
• v.12 no.1
• /
• pp.8-20
• /
• 2002

In this study using $N_2$-back flushing, which wwas not the general back-flushing method of membranes, the discharged wastewater from a paper plant was filtrated by 4 kinds of tubular carbon ceramic ultrafiltration membranes. We could in vestigate effects of $N_2$-back flushing period, transmembrane pressure (TMP)and flow rate and find optimal operating conditions. The $N_2$-back flushing time (BT) was fixed at 40 sec, filtration times (FT) were changed in 4~32 min, TNP in $1.0~3.0kg_f/cm^2$ the flow celocities in 0.53~1.09cm/s. The optimal conditions were discussed in the viewpoints of dimensionless permeate flux ($J/J_0$), toal permeate volume ($V_T$) and resistance of membrane fouling ($R_f$). Optimal back-flushing period was BT/FT=0.167 (FT=8 min ), in which more $V_T$ was obtained than that in BT/FT=0.083 (FT=4 min) which was the most friquent back-flushing condition. Then rising TMP should increase the driving force, and more $V_T$ could be accumulated. And rising flow rate should decrease membrane fouling increase permeate flux, and more $V_T$could be produced. Average rejection rates of pollutants were higher than 95% for turbidity and 45~83% for $COD_{Cr}$, but rejection rates of total dissolved solid (TDS) were lower than 10%.

• Membrane Journal
• /
• v.25 no.5
• /
• pp.415-421
• /
• 2015

$SrCo_{0.8}Fe_{0.1}Nb_{0.1}O_{3-{\delta}}$ oxide was synthesized by solid state reaction method. Dense ceramic membrane was prepared using as-prepared powder by pressing and sintering at $1250^{\circ}C$. XRD result of membrane showed single perovskite structure. The oxygen permeability were measured under 0.21 atm of oxygen partial pressure ($P_{O_2}$) and between 800 and $950^{\circ}C$. The oxygen permeation flux of $SrCo_{0.8}Fe_{0.1}Nb_{0.1}O_{3-{\delta}}$ membrane was increased with the increasing temperature. The maximum oxygen permeation flux was $1.839mL/min{\cdot}cm^2$ at $950^{\circ}C$. Long period permeability experiment was carried out to confirm the phase stability and $CO_2$-tolerance of membrane containing Nb in the condition of air with $CO_2$ (500 ppm) as feed stream at $900^{\circ}C$. The phase stability and $CO_2$-tolerance of $SrCo_{0.8}Fe_{0.1}Nb_{0.1}O_{3-{\delta}}$ were investigated by XRD and TG analysis. The result of $SrCo_{0.8}Fe_{0.1}Nb_{0.1}O_{3-{\delta}}$ which exposed carbon dioxide for 100 hours indicated 8wt% of $SrCO_3$. But it was known that the level of $SrCO_3$ production dose not have a significant effect on oxygen permeability.

• Korean Journal of Organic Agriculture
• /
• v.16 no.3
• /
• pp.287-298
• /
• 2008

This experiment was carried out to investigate the effect of different feed conditions on growth, cast production and conversion efficiency of organic matter to the earthworm. The experiment was tested on cow manure(CM) mixed with rice hulls (RH) or rice straw(RS). The mixture ratios were designed as one time, two times and three times of cow manure volume, respectively. The CM and RH mixtures resulted better on growth rate, reproductive efficiency and wormcast production than those for CM and RS mixtures. Especially on three times of RH mixture showed the highest growth characteristics compared to the other mixtures. Although both were between 20 and 34 on carbon and nitrogen ratio, the result inferred that the difference on the growth might have been caused by feeding conditions. On the mixtures of cow manure with rice hulls(CM+RH) was significantly higher on values on the conversion rate and conversion efficiency of organic matter to earthworm tissues than the mixtures of cow manure with rice straw(CM+RS). The most concerned point of the mixture of earthworm feed is that high contents of volatile solid and total carbon that increases in conversion efficiency of organic matter to earthworm tissues, and also causes the increase in growth rate and reproductive efficiency. The wormcast could be used as a valuable plant growth medium or soil conditioner for sustainable agriculture and it may be due to their high qualities of physico-chemical properties.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.451-457
• /
• 2019

In this study, the characteristics of coffee grounds were reviewed by making them from solid fuel through heat-drying and oil-drying method. The differences in the higher calorific power by each dried sample were compared. And industrial analysis using the thermogravimetric analyzer was considered for applicability to organic waste and oily samples. Before and after drying, the surface of the specimen was observed with SEM equipment and the ingredients were measured through the EDS equipment. As a result, no other hazardous substances, such as heavy metals, were measured. Next, The differences between thermal decomposition and combustion reactions were considered through the TG and DTG curves. As a result, it is that the oil-dried coffee grounds is longer to burn than the heat-dried coffee grounds. Finally, the combustion gases emitted through the thermogravimetric analyzer were collected and the carbon monoxide and carbon dioxide performed qualitative and quantitative analysis using GC over time.

• Applied Chemistry for Engineering
• /
• v.34 no.1
• /
• pp.15-22
• /
• 2023

Recent studies have actively investigated ways to improve the economic feasibility and efficiency of the Fischer-Tropsch process by increasing the yields of the monocyclic aromatic compounds (BTEX). In this study, ethylene was selected as a model of F-T-derived hydrocarbons, and the ethylene-to-aromatics (ETA) reaction was investigated according to changes in acid characteristics, mesopores, and crystallinity of HZSM-5 (HZ5). Fluorinated HZ5 was prepared by calcination followed by impregnation of an aqueous NH₄F solution having different molar concentrations in HZ5, and the structural and chemical properties of F/HZ5 were investigated through Brunauer-Emmett-Teller (BET), solid-state nuclear magnetic resonance (NMR), X-ray photoelectron spectroscopy (XPS), NH₃-temperature-programmed desorption (TPD), and pyridine-IR spectroscopy. The ETA reactions were performed at 673 K under 0.1 MPa, and fluorinating HZ5 by an aqueous NH₄F solution of 0.17 M improved ethylene conversion, BTEX selectivity, and catalytic stability due to acidity, mesopore fraction, and crystallinity.

• Applied Chemistry for Engineering
• /
• v.33 no.4
• /
• pp.394-401
• /
• 2022

The synthesis of 1,2-alkylaminopropanediols (1,2-AAPs) was designed to improve the hydrophilicity of linear 1,2-alkanediols having 10, 12, 14, and 16 carbon atoms in the alkyl chain. 1,2-AAPs were synthesized by reacting 3-monochloro-1,2-propanediol (3-MCPD) with linear alkylamines having 10, 12, 14 or 16 carbon atoms in an ethanol solvent at 40℃ for 2 h. The yield and purity of four types of 1,2-AAPs synthesized were found to be in the range of 51-58% and 85-99%, respectively. The amine salts of four types of 1,2-AAPs were prepared from a purified paste or solid compound by adding an acidic solution (HCl) to pH 7, and then their solubilities and antibacterial effects were tested. 1,2-decylaminopropanediol, 1,2-dodecylaminopropanediol, and 1,2-tetradecylaminopropanediol were all dissolved in water at concentrations of 100%, 50%, and 0.1%, respectively, however 1,2-hexadecylaminopropanediol was not. The antibacterial effect was improved as the length of the alkyl chain increased. As a result of confirming the preservative effect of the lotion (cosmetic formulation) applied with 1,2-AAP for application, it showed very strong antibacterial activity at low concentrations ranging from 0.005% to 0.2%.

• Korean Journal of Organic Agriculture
• /
• v.32 no.1
• /
• pp.75-90
• /
• 2024

Biochar is a solid substance with a high carbon content, as it is made out of biomass pyrolyzed under the condition of limited oxygen. This product has attracted attention as an environment-friendly soil amendment because it contributes to carbon neutrally and has improvement effects on the soil environment. This study conducted an experiment to evaluate soil physiochemical properties and microbial community changes in a melon greenhouse according to the applied amount of biochar to investigate the growth characteristics and yields of melons accordingly. In soil physical properties, an increase in the applied amount of biochar resulted in a decrease in bulk density and an increase in porosity of the soil, improving air permeability. In soil chemical properties, an increase in the applied amount of biochar led to a increasing of pH, organic matter and available phosphate content. In the growth characteristics of melons, there was a growing tendency of plant height, leaf length and leaf width according to the increasing application of biochar until 10,000 kg/ha. Moreover, melon yields also increased as the amount of biochar, 13~16% higher in 10,000 kg/ha biochar application than no treatment. Compared differences among microbial communities in the soil according to the application of biochar and found that plant beneficial bacteria dominated in biochar treatments. This study demonstrated the potential of biochar as an effective soil amendment in melon greenhouse by showing improvements in soil physicochemical properties and microbial communities.

• Journal of Mushroom
• /
• v.2 no.3
• /
• pp.149-156
• /
• 2004

This study was carried out to obtain basic data on physiological characteristics for an artificial cultivation of fruiting body of Cordyceps. Specimens such as Cordyceps longissima, C. militaris and C. pruinosa were collected at Mt. Halla of Cheju island in July, 2003. Among four different culture media which have been used for culture of mushrooms, MCM medium was selected for the favorable culture medium of the Cordyceps tested. The initial pH of solid medium for mycelial growth of Cordyceps was good in the range of pH 5.0~7.0 lower than 8.0. The mycelial growth of C. longissima was most favorable on culture media supplemented with glucose, one of monosaccharides. In C. militaris, nine carbon sources were favorable to the mycelial growth as compared with control among 11 carbon sources. Six nitrogen sources were favorable to the mycelial growth of C. longissima as compared with control among 9 carbon sources; namely, the mycelial growth of C. longissima was most favorable on culture media contained potassium nitrate, and followed in order by ammonium citrate and sodium nitrate in 4 weeks incubation.

• Applied Chemistry for Engineering
• /
• v.25 no.5
• /
• pp.510-514
• /
• 2014

In this work, the effect of torrefaction on the basic characteristic of sewage sludge was studied to evaluate the energy potential as a solid fuel. Torrefaction experiments were performed at temperatures of $150{\sim}600^{\circ}C$. The torrefied sewage sludge was characterized by the energy yield, ash content, volatile fraction and high heating value (HHV). The gaseous products from torrefaction of the sewage sludge were also analyzed. Thermogravimetric analysis was carried out for the kinetic analysis of sewage sludge torrefaction. From this work, it was found that the ash content increased with an increase of the torrefaction temperature while the energy yield, HHV and volatile fraction decreased. It was also found that the emission of carbon monoxide and hydrocarbon gases started at $300^{\circ}C$ by the thermal degradation of volatile components in the sewage sludge.