• Fire Science and Engineering
• /
• v.16 no.1
• /
• pp.18-23
• /
• 2002

Efficiency estimation of toxicity free resistance cable experiments were conducts to understand toxicity free fire ersistance polyolefin insulation material and smoke density characteristic and combustion gas corrosion analysis. A main cause of fire-growth and generating toxic gas when it burns, should be dealt with great care in life safety design. Similar patterned fire incidents such as, Inchon Live-Hof Pub Restaurant as, Sea-land Children Resort have proven that serious loss of lives were caused by hazardous gas generated fire resistance cable materials. In this paper, Referenced documents were ASTM E662 standard test method for specific Ds genalated by solid materials. The furnace control system shall maintain the required irradiance level under steady-state condition with the chamber door closed of 2.5$\pm40.04〔w/$\textrm{cm}^2$〕for 20 min. According to the results of the smoke density analysis of NFR-8 and FR-PVC the highest decomposition flaming smoke density range of NFR-8 and FR-PVC were 25.2 to 37.5 and 51.1 respectively. Nonflaming smoke density range of NFR-8 and FR-PVC were 100.4 to 112.2 and 126.5 to 398.8. Also, the fire gases was occurred carbon monoxide and decomposition than in polyolefin due to incomplete combustion of PVC which has high content of carbon in chemical compound.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.3
• /
• pp.478-486
• /
• 2017

To find the effect of packaging materials(LDPE $60{\mu}m$, Ceramic $30{\mu}m$ and $60{\mu}m$) to enhance the shelf-life of de-astringent persimmon, the fruits used were the astringent persimmons of "Cheongdobansi" and astringency was removed in $CO_2$. De-astringent persimmon were stored in MA for 140 days at $5^{\circ}C$. During storage, the concentration of oxygen was decreased to 5.2%, while the concentration of carbon dioxide was increased to 5.2% from 18 days. But the concentration of oxygen and carbon dioxide was maintained at a constant concentration until the end of storage. The rate of weight loss was gradually decreases for the storage time elapsed and has better in ceramic $60{\mu}m$ packaging than other packaging materials. Fruit hardness and color value were well maintained in ceramic $60{\mu}m$ packaging. Tannin content and soluble solid were not significant difference among the packaging conditions. Ethanol and acetaldehyde content were decreased during early period of storage and then increased. As a result of objective analysis, de-astringent persimmon storage in ceramic $60{\mu}m$ was more effective than other storage conditions.

• Korean Chemical Engineering Research
• /
• v.52 no.4
• /
• pp.544-552
• /
• 2014

In this study, We have investigated the kinetics on the char-$CO_2$ gasification reaction. Thermogravimetric analysis (TGA) experiments were carried out for char-$CO_2$ catalytic gasification of an Indonesian Roto lignite. $Na_2CO_3$, $K_2CO_3$, $CaCO_3$ and dolomite were selected as catalyst which was physical mixed with coal. The char-$CO_2$ gasification reaction showed rapid an increase of carbon conversion rate at 60 vol% $CO_2$ and 7 wt% $Na_2CO_3$ mixed with coal. At the isothermal conditions range from $750^{\circ}C$ to $900^{\circ}C$, the carbon conversion rates increased as the temperature increased. Three kinetic models for gas-solid reaction including the shrinking core model (SCM), volumetric reaction model (VRM) and modified volumetric reaction model (MVRM) were applied to the experimental data against the measured kinetic data. The gasification kinetics were suitably described by the MVRM model for the Roto lignite. The activation energies for each char mixed with $Na_2CO_3$ and $K_2CO_3$ were found a 67.03~77.09 kJ/mol and 53.14~67.99 kJ/mol.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.2 no.4
• /
• pp.1-10
• /
• 2011

This study investigates the performance of composite (steel-concrete) frame structures through numerical experiments on individual connections. The innovative aspects of this research are in the use of connections between steel beams and concrete-filled tube (CFT)columns that utilize a combination of low-carbon steel and shape memory alloy (SMA) components. In these new connections, the intent is to utilize the recentering provided by super-elastic shape memory alloy tension bars to reduce building damage and residual drift after a major earthquake. The low-carbon steel components provide excellent energy dissipation. The analysis and design of these structures is complicated because the connections cannot be modeled as being simply pins or full fixity ones they are partial restraint (PR). A refined finite element (FE) model with sophisticated three dimensional (3D) solid elements was developed to conduct numerical experiments on PR-CFT joints to obtain the global behavior of the connection. Based on behavioral information obtained from these FE tests, simplified connection models were formulated by using joint elements with spring components. The behavior of entire frames under cyclic loads was conducted and compared with the monotonic behavior obtained from the 3D FE simulations. Good agreement was found between the simple and sophisticated models, verifying the robustness of the approach.

• Journal of Energy Engineering
• /
• v.23 no.4
• /
• pp.207-214
• /
• 2014

With the depletion of high grade coal, it is indispensable to be used co-combustion of low rank coal with bituminous coal in pulverized coal-fired power plants. This study describes the detailed measurements of combustion characteristics of bituminous and subbituminous coal in a 0.7MWth pilot-scale test facility. This experimental works include the measurement of gas temperature, gas concentrations along with the reactor axial and radial distance at the condition of excess air ratio of 1.2. The solid sampling was carried out and analyzed with the combustion of bituminous coal. The main reaction zone of coal flame in a reactor was formed about 1 m from the swirl burner, and at downstream, the fully developed temperature and species distribution was observed. The sampled particles of bituminous coal in a reactor revealed the complete carbon burn-out was achieved just after an main combustion zone.

• Polymer(Korea)
• /
• v.30 no.1
• /
• pp.85-89
• /
• 2006

The effect of vapor grown carbon fiber (VGCF) contents on electrical and rheological properties of VGCF filled polyphenylene sulfide (PPS) composites prepared through melt mixing using a twin screw exruder was studied. This method was proved to be quite effective to produce good dispersion of VGCF in the matrix even for highly filled PPS. From the dependence of the electrical conductivity on VGCF content, the percolation phenomena began to occur above $10\;wt\%$. While there is only a marginal increase of viscosity for 1 and $5\;wt\%$ VGCF filled PPS, the composites containing $10\;wt\%$. While VGCF showed abrupt increase in viscosity as well as flattening of frequency vs modulus curve, indicating a transition from a liquid-like to a solid-like behavior due to the creation of VGCF network. This result agrees well to the fact that the network formation in the composite can be composite by rheological property dependence on filler content as well as by electrical conductivity measurement.

• Membrane Journal
• /
• v.28 no.4
• /
• pp.252-259
• /
• 2018

An acidic, real metal-plating wastewater was treated by a fluidized bed membrane reactor introduced with granular activated carbon (GAC) as fluidized media. With GAC fluidization, there was no increase in suction pressure with time at each flux set-point applied. At neutral solution pH, much less fouling rate was observed than acidic pH under GAC fluidization. Higher solution pH resulted in the increase in particle size in metal-finishing wastewater, thus producing a less dense cake structure on membrane. More than 95% of chemical oxygen demand was observed from the fluidized bed membrane reactor under GAC fluidization. Total suspended solid concentration in membrane permeate was near zero. At the raw wastewater pH, no removal of copper and chromium by the fluidized bed membrane reactor was observed. As the pH was increased to 7.0, removal efficiency of copper and chromium was increased considerably to 99 and 94%, respectively. Regardless of solution pH tested, more than 95% of cyanide was removed possibly due to the strong adsorption of organic-cyanide complex on GAC in fluidized bed membrane reactor.

• Korean Journal of Microbiology
• /
• v.12 no.4
• /
• pp.159-179
• /
• 1974

In order to investigate morphological and cultural characteristics of strains in species, Flammulina velutipes, the author collected isolates of Flammultina velutipes at 49 locations in Korea and cultivated these isolates on the various kinds of solid media. After investigating the cultural characteristics, appeared on the various media, he obtained the following results : 1. The variation of colors in the fruit bodies is connected with the variation of climatic environments(composite effects between mean temperature in January and number of rain days of 1mm and over precipitation). The author, therfore, can find out the trend that brown type is distributed in the midland climatic region and yellow type in the southern climatic regoin. 2. Two types can be classified into several strains respectively : the strain of abundant or insufficient productivity, and strain of selectivity or non-selectivity of media. 3. According to the results of mutual comparison of soluble mycelial proteins by disc electrophoresis using polyacrylamide gels, each type has special common protein fractions(brown type : band located at 26..5mm position from surface of gel, yellow type : band located at 24.5mm position from surface of gel), and each strain has special protein fractions too. Therefore this phenomenon seems to support the results obtained by the above-stated morphological and cultural studies. 4. In the adaptability of strains to the temperature, every strain has the nature of growing in lower temperature(the optimum temperature of 20.deg.C to 25.deg.C) except that YI-1 strain has the optimum temperatue of $25^{\circ}C$-26^{\circ}C. And mycelial growth of every strain is discontinued at $35^{\circ}C.$ 5. In the adaptability of strains to the H-ion concentration, every strain has wide adaptable range of H-ion concentration, and has optimum range of pH 5.5 to 6.6 in mycelial growth excepting YA01, BI-2 and YI-1. 6. In the utility of carbon sources, the mycelial growth of every strain is very poor on the media containing xylose(average diameter of mycelial growth : 18mm), and most strains utilize favorably sucrose(39mm), maltose(37mm) and dextrose(35mm) in mycelial growth. In the utility of nitrogen sources, every strain utilizes favorably organic nitrogens(36 mm)more than inorganic nitrogens (25 mm), and utilizes fully peptone nad asparagine in organic nitrogens. Especially BA-1, BIK-2 and YA-1 strains grow vigorously on each media containing various carbon and nitrogen sources. 7. The characteristic tests of the number of days required for mycelial growth, the number of days requried for sprout of young bodies, the length of stipe and the number of fruit bodies formation seem to be useful methods in the early selection of the strain of the abundant productivity.

• Applied Microscopy
• /
• v.12 no.2
• /
• pp.11-22
• /
• 1982

The morphological development of Mycoplasma pneumoniae attached to solid surfaces was examined by light and electron microscopies. Critical point drying and carbon replication techniques revealed that during the growth cycle of developing microcolonies, the morphological form coincided with the pH of the culture. M. pneumoniae appeared to have a well defined morphology associated with age of the culture. The organisms were dimorphic, with round cells capable of reproduction and segments consisting of a spindle shaped body with one pointed and one knob-like end. Starting with single cells, there were the following stages in the development of a culture: replication stage through binary fission and segmentation, stage of confluency, and a degeneration stage into rough spherical forms. The round cells appearrd to replicate by binary fission during the lag and early log phases of growth, while spindle segments replicated by segmentation during most of the logarithmic growth. The growth of the filaments and replication of the segments occured at the knob-like ends, showing a type of polarity, and formed a meshwork across the surface. This development could be cycled under favorable growth conditions, but the culture aged and when the conditions became adverse(e.g. pH 6.8 or lower), filamentous cells converted to spherical forms, losing their reproductive capability.

• Korean Journal of Agricultural Science
• /
• v.45 no.2
• /
• pp.197-203
• /
• 2018

Biochar is the carbon solid produced through the pyrolysis of a biomass from organic sources such as agricultural waste, animal manure, and sludge under limited or anaerobic conditions. Biochar has the effect of reducing greenhouse gases through the carbon sequestration method; additionally, biochar is known to function as a soil amendment. This experiment was conducted to evaluate the application of biochar on the growth characteristics of Chinese cabbage at Chungnam National University in Daejeon, Korea. The Chinese cabbage was grown for 50 days in a glasshouse in pots. A pruning branch was used to produce the bead and pellet forms of biochar through pyrolysis. The biochar was added to the soil at 0, 2, and 5% by weight. The Chinese cabbage with the 2% treatment of the bead form of biochar had the highest fresh weight ($149.43{\pm}15.92g\;plant^{-1}$) which was increased by 10% compared to the control ($136.91{\pm}31.46g\;plant^{-1}$). Moreover, for the 5% treatment of the bead form of biochar ($60.91{\pm}9.82g\;plant^{-1}$), the growth decreased by 57% compared to the control. As the content of the bead form of biochar increased, the shoot dry weight, leaf number, leaf length and lead width that appeared decreased. An increase in the total organic matter, Avail. $P_2O_5$, Ex. cation and EC was observed when the biochar content was increased. Our results support the application of 2% biochar in the bead form for increased growth of Chinese cabbage.