Titanium is applied in various industries due to its valuable properties and abundant reserves. Generally, if a highly uniform oxide structure and a high-density oxide film is formed on the surface through anodization treatment, the utility value such as color appearance and corrosion inhibition efficiency is further increased. The objective of this study was to determine improvement of water-repellent property by controlling titanium oxide parameters such as pore size and inter-pore distance to improve corrosion resistance. Oxide film structures of different shapes were prepared by controlling the anodization processing time and voltage. These oxide structures were then analyzed using a Field Emission Scanning Electron Microscope (FE-SEM). Afterwards, a Self-Assembled Monolayer (SAM) coating was performed for the oxide structure. The contact angle was measured to determine the relationship between the shape of the oxide film and the water-repellency. The smaller the solid fraction of the surface, the higher the water-repellent effect. The surface with excellent hydrophobic properties showed improved corrosion resistance. Such water-repellent surface has various applications. It is not only useful for corrosion prevention, but also useful for self-cleaning. In addition, a hydrophobic titanium may open up a new world of biomaterials to remove bacteria from the surface.
The checking stresses in the Chinese codes for reinforced concrete (RC) or prestressed concrete (PC) bridges are aimed for the thin-web beam, which cannot reflect the actual behavior of the modern structures. The incompleteness of the checking stresses could give rise to the deficiency in the design and calculation, and unable to reveal the reason of some common cracks in the structure. In this paper, the complete stress checklist for RC or PC girder bridges are listed, as well as the corresponding crack shapes. The expression of the complete checking stresses is proposed in details. Spatial Grid Model can reflect all the concerned stresses in the structure. Through the comparison of the calculation results from the spatial grid model and the solid model, it is seen that the spatial grid model can reflect load effects such as shear lag effect, thin-wall effect and local effect. The stresses obtained from the spatial grid model could help engineers to have a good understanding of the structural behavior. Meanwhile, the stress checklist provides the information for analyzing and solving the deficiency in the structure.
The immobilization of APTMS(3-(2-aminoethylamino)propyltrimethoxysilane) and AAPTMS(3-(2-(2-aminoethyl)aminoethylanino)propyltrimethoxysilane) on the surface of high quality mesoporous molecular sieves MCM-41 and MCM-48 have been confirmed by F.T.-IR spectroscopy, Raman spectroscopy, 29Si solid state NMR, and a surface polarity measurement using Reichardt's dye. The formation of metal (Co(Ⅱ), Ni(Ⅱ), and Cu(Ⅱ)) complexes by immobilized aminosilanes have been investigated by photoacoustic spectroscopy(PAS). The assignment of UV-Vis. PAS bands makes it possible to identify the structure of metal complexes within mesoporous molecular sieves. Co(Ⅱ) ion may be coordinated mainly in a tetrahedral symmetry by two APTMS onto MCM-41, and in an octahedral one by two AAPTMS. Both Ni(Ⅱ) and Cu(Ⅱ) coordinated by aminosilanes within MCM-41 form possibly the octahedral complexes such as [Ni(APTMS)2(H20)2]2+, [Ni(AAPTMS)2]2+, [Cu(APTMS)2(H2O)2]2+, and [Cu(AAPTMS)(H2O)3]2+, respectively. The PAS band shapes of complexes onto MCM-48 are similar to those of corresponding MCM-41 with the variation of PAS intensity. Most of metal ion(Ⅱ) within MCM-41 and MCM-48 are coordinated by aminosilanes without the impregnation on the surface.
AKOB, Muhammad;YANTAHIN, Munawar;ILYAS, Gunawan Bata;HALA, Yusriadi;PUTRA, Aditya Halim Perdana Kusuma
The Journal of Asian Finance, Economics and Business
/
제8권1호
/
pp.419-430
/
2021
The study aims to analyze the factors that shape patient loyalty, namely, by involving the service quality factor (SERVQUAL), hospital image, patient value, and patient satisfaction in private hospitals. This study was conducted in Makassar City, Indonesia, with a sample of 296 eligible samples from private hospitals. The sample criteria were patients with outpatient and hospitalization status. Then, this study developed 23 hypotheses to test the statistical relationship between direct, intervening and multiple-effect models. Problem-solving and research focus are carried out using a quantitative method approach with a PLS-SEM-based testing tool. The bootstrapping method is being used with the constant bootstrapping step to demonstrate the results of hypothesis testing; we find that the overall hypothesis has a positive and significant effect. The combination of testing models involving several variables shows that a patient's loyalty can be formed if a patient's satisfaction has been realized. Satisfaction can be realized if the value-customer has been felt by the patients. Therefore, the hospital image must be directly proportional to service quality. Service quality is the essence of service that directly affects customers; service quality is also the reason that shapes consumer perceptions in increasing rationalization and solid customer (patient's) decision-making.
The aim of this paper is to investigate stress analysis of semi-infinite soils consisting of two layers with twin rectangular tunnels under static loads. The region close to the ground surface and tunnel modelled within finite elements. In order to use a more realistic model, the far region is modelled within infinite elements. The material model of the layered soil is considered as elastic and isotropic. In the finite element solution of the problem, two dimensional (2D) plane solid elements are used with sixteen-nodes rectangular finite and eight-nodes infinite shapes. Finite and infinite elements are ordered to be suitable for the tunnel and the soils. The governing equations of the problem are obtained by using the virtual work principle. In the numerical process, the five-point Gauss rule is used for the calculation of the integrations. In order to validate using methods, comparison studies are performed. In the numerical results, the stress distributions of the two layered soils containing twin rectangular tunnels presented. In the presented results, effects of the location of the tunnels on the stress distributions along soil depth are obtained and discussed in detail. The obtained results show that the locations of the tunnels are very effective on the stress distribution on the soils.
낙동 비소-비스무스 광상에서 산출되는 Pb-Ag-Bi-S계에 광물로는 방연석-마틸다이트(matildite) 고용체, 코살라이트(cosalite) 및 헤이로브스카이트(herovskyite)가 있다. 방연석-마틸다이트 고용체의 경우 자연비스무스와 더불어 황철석내의 틈을 채우면서 산출되는데, 불규칙한 모양을 이룬다. 코살라이트는 석영맥내에서 자연비스무스, 헤이로브스카이트 및 Bi-Te-S계 광물들을 포함하며, 타형의 독립된 결정으로 산출된다. 낙동광상에서 산출되는 마틸다이트는 $Ag_{1.07-1.11}Bi_{1.12-1.20}S_2$의 단성분 조성을 이루는 것므로 이상화학조성에 비해 $0.3{\sim}2.4$mole%의 $Bi_2S_3$가 초과 함유되어 있다. PbS와 $AgBiS_2$를 단성분하는 고용체의 경우 PbS는 약 54 mole% 이하의 함량을 나타내고, 그 이상의 경우는 관찰되지 않는다. 연구지역 코살라이트의 평균화학소성은 $Pb_{1.79}Bi_{2.29}Ag_{0.12}S_5$로서 순수한 코살라이트에 비하여서는 Pb가 결핍되어 있으며, Ag와 Cu를 각각 최대 1.47 wt.%와 0.27 wt.% 함유하고 있다. 헤이로브스카이트는 $Pb_{5.01}Ag_{0.26}Bi_{2.70}S_9$ 조성을 보이는데 $2Pb^{2+}$에 대한 $Ag^++Bi^{3+}$의 쌍치환과 더불어 $3Pb^{2+}$에 대한 $2Bi^{3+}$의 치환이 함께 일어난 것으로 여겨진다. 낙동광상의 Pb-Ag-Bi-S계 광물들의 생성 조건은 대략 $220{\sim}270^{\circ}C$ 온도와 200bar 미만의 압력인 것으로 해석된다.
참치 뼈로부터 추출한 hydroxyapatite [$Ca_{10}(PO_4)_6(OH)_2$] 와 여기에 소결성 증진을 위해 wollastonite($CaSiO_3$)를 첨가하여 고상반응시킨 세라믹 소결체의 결정상, 미세구조와 꺽임강도(bending strength) 등의 특성을 고찰하였다. 참치 뼈에서 추출한 hydroxyapatite자체의 소결성은 매우 취약하였는데, 이는 건식법의 입자분쇄 한계 때문으로 보인다. Hydroxyapatite에 wollastonite가 첨가된 경우 소결온도가 $1250^{\circ}C$이하에서는 hydroxyapatite와 pseudowollastonite(${\alpha}-CaSiO_3$)가 혼재된 결정상을 보였으나, 온도가 증가할수록 hydroxyapatite의 분해에 따른 whitlockite [$Ca_3(PO_4)_2$] 상이 관찰되었다. 소결온도가 $1250^{\circ}C$이하에서는 미세한 입자들과 많은 기공들이 분포하였으며, 소결온도가 증가할수록 입자의 크기는 증가하여 소결이 상당히 진행된 미세구조를 나타내었다. Wollastonite가 첨가된 소결시편의 평균 꺽임강도는 18MPa로서 해면골(cancellous bone)의 최대 꺽임강도인 20MPs에 근접한 것으로 나타났다.
본 연구에서는 355 nm의 파장을 갖는 Nd:YVO$_4$ 3고주파 DPSS 레이저를 이용하여 폴리머의 3차원 미세형상 가공기술을 개발하였다. UV레이저와 폴리머의 어블레이션에 관한 메커니즘을 설명하였으며 비교적 UV영역에서 파장이 긴 355 nm파장의 영역에서는 광열분해 반응으로 가공되고 이에 따른 폴리머의 광학적 특성을 살펴보았다. 광 흡수율 특성이 우수한 폴리머가 광가공 특성이 좋은 것으로 나타났으나 벤젠구조가 많이 포함되어 있는 폴리이미드의 경우는 광분해후 다시 새로운 화학적 결합이 이루어져 가공부 면이 좋지 않은 면을 보였다. 레이저의 다중 주사방식으로 가공하기위하여 표면의 오염이 적은 폴리카보네이트를 시편으로 사용하여 3차원 적으로 모델링한 직경 1 mm와 500 $\mu\textrm{m}$의 마이크로 팬을 가공하였다. 레이저 발진 효율이 높고 유지비가 적은 355 nm의 DPSSL을 이용한 3차원 가공기술의 개발로 향후 저비용으로 빠른 시간에 미세부품을 개발하는 기술에 기여할 것으로 예상된다.
구름버섯에 있어 3계통(系統)의 한국산(韓國産)과 1종(種)의 일본산(日本産) 균주간(菌株間) 생리유전적(生理遺傳的) 유연관계(類緣關係)를 알아보기 위하여 각(各) 균주(菌株)의 생리적(生理的) 특징(特徵)과 전기영동법(電氣泳動法)에 의한 생화학적(生化學的)인 차이 및 인공재배(人工栽培)에 의한 자실체(子實體)의 형태(形態)를 비교(比較)한 결과(結果)를 요약(要約)하면 다음과 같다. 각(各) 균주(菌株)의 생육조건중(生育條件中) 배지(培地)의 선택성에는 대체로 동일한 경향(傾向)을 보였는데 고체배지상(固體培地上)에서는 PDA, CVT-I 그리고 MES가 양호했으며, 액체배지(液體培地)에서는 927과 CVT-III가 가장 양호하였다. 또 최적(最適) pH는 5.6이었으며 온도(溫度)는 $25{\sim}30^{\circ}C$가 적당한 것으로 나타났다. 전기영동법(電氣泳動法)에 의한 단백질(蛋白質) 및 동위효소(同位酵素)들의 pattern에 있어서는 16001과 KD88001이 대체로 유사하였으나 다른 균주(菌株)들 간(間)에는 각각 다르게 나타났다. 각(各) 균주(菌株)를 인공재배(人工栽培)하여 자실체(子實體)의 형태(形態)를 조사한 결과(結果) 16001과 KD88001은 형태(形態)나 색상(色相)에서 매우 유사함을 보여 동일 계통(系統)으로 나타났으나 16002와 CVT-80은 현저한 차이를 보여 서로 다른 계통(系統)인 것으로 사료된다.
재래식(在來式)콩간장의 제조(製造)에 있어서 국균(麴菌)의 종류별(種類別), 메주의 형태별(形態別)로 담금하여 숙성과정(熟成過程)중의 효소력(酵素力)과 성분(成分)의 변화(變化)를 검토한 결과(結果)는 다음과 같다. 1. 메주 및 간장숙성과정(熟成過程)중의 protease 활성(活性)은 Asp. sojae로 제조한 종국(種麴)이 Asp. oryzae로 제조한 종국(種麴)에 비하여 높았고 국수형의 매주가 벽돌형의 메주에 비하여 높았으며 amylase활성(活性)은 Asp. oryzae균(菌)이 Asp. oryzae균(菌)에 비하여 대체로 높은 경향을 나타냈다. 2. 간장숙성기간(熟成其間)중의 총질소(總窒素), 아미노태질소(窒素), 순고형분(純固形分)의 함량과 비중(比重)은 Asp. sojae균(菌)의 국수형의 메주로 담금한 것이 가장 높았고 Asp. oryzae의 벽돌형메주로 담금함 것이 가장 낮았다. 3. 완층능은 Asp. sojae균(菌)의 국수형의 메주로 담금한 간장이 $1.77{\sim}2.56$으로서 가장 높았으며 알코올성분(成分)은 전시험구 공히 검출되지 않았고 암모니아태질소(窒素)의 함량은 각 시험구간의 큰 차가 없었다. 4. 간장 숙성기간(熟成其間)중의 단백분해율(蛋白分解率)과 질소이용율(窒素利用率)은 Asp. sojae균(菌)의 국수형메주가 가장 높았고 Asp.oryzae균(菌)의 벽돌형메주가 가장 낮았으며 특히 메주의 형태(形態)에 따라 질소이용율(窒素利用率)은 많은 차이(差異)를 나타냈다. 5. 3개월간 숙성(熟成)후 간장을 여과하고 남은 재래식(在來式) 장중의 일반성분(一般性分)은 수분(水分) $54{\sim}61%$, 아미노태질소(窒素) $457{\sim}682mg%$, 염분(鹽分) $18{\sim}23%$, 지방(脂肪) $5.4{\sim}9.1%$, 단백질(蛋白質) $8.6{\sim}9.4%$로 나타났고 이중 Asp. sojae균(菌)의 국수형메주의 경우 성숙도(아미노태질소의 mg%)가 가장 높았다. 6. 3개월간 숙성(熟成)한 간장을 색 맛 향기(香氣)등에 대하여 관능시험한 결과 Asp. sojae균(菌)의 벽돌형메주로 담금한 것이 가장 양호(良好) 하였으며 Asp. oryzae균(菌)의 벽돌형메주로 담금한 것이 가장 불량(不良)하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.