• 한국태양에너지학회 논문집
• /
• 제32권3호
• /
• pp.68-76
• /
• 2012

Since the solar energy resource is the main input for sizing any solar energy utilization system, it is essential to utilize the solar radiation data as an application and development of solar energy system increase. It will be necessary to understand and evaluate the insolation data. The Korea Institute of Energy Research(KIER) has begun collecting horizontal global insolation data since May, 1982 at 16 different locations in Korea and for the more detailed analysis, images taken by geostationary satellite may be used to estimate solar irradiance fluxes at earth's surface. It is based on the empirical correlation between a satellite derived cloud index and the irradiance at the ground. From the results, the measured data has been collected at 16 different stations and estimated using satellite at 44 different stations over the Korean peninsula from 1982 to 2010. The Result of analysis shows that the annual-average daily global radiation on the horizontal surface is 3.66 $kWh/m^2/day$ and estimated solar radiation fluxes show reliable results for estimating the global radiation with average deviation of -7.2 to +3.7 % from the measured values.

• 한국환경과학회지
• /
• 제4권1호
• /
• pp.13-18
• /
• 1995

In order to examine the effect on the insolation of cloud cover, we analyzed the data of the insolation, cloud cover and surface air pressure in Pusan during the period of 1991. 10 - 1993.1. At first, we investigate the atmospheric transmissivity A(t) using the Beer's law at clear skies. The atmospheric transmissivity is characterized by cold season high and warn season low. From this atmospheric transmissivity, the empirical formula that shows the variation of the insolation due to the cloud cover is obtained. The result formula is I : l0 A(tn)·( 0.7-0.05×m ). 1 is the insolation that reaches the surface when cloud cover is m and to is solar constant. Although the result is some rough it seems meaningful that the estimation of insolation can be made only from the routine data.

• 태양에너지
• /
• 제13권1호
• /
• pp.67-74
• /
• 1993

본 연구는 정부가 대체에너지기술의 개발과 이용촉진을 목적으로 새롭게 구상하고 있는 "Clean Enertopia 제주"사업과 관련, 최근 관심을 끌고 있는 제주도를 대상으로 이 지역 일사량을 측정, 분석하여 그 분포특징과 향후 에너지자원으로서의 이용가능성을 평가하는데 목표를 두고 수행하였다. 현지 측정사업의 내용을 중심으로 지금까지 나타난 결과를 보면 1) 제주지역의 일사량은 우리나라 남해안보다 13% 이상 낮으며, 2) 제주도 내에서도 동서지역간의 격차가 현저하게 존재하였다. 는 점으로 된다.

• 한국태양에너지학회 논문집
• /
• 제31권2호
• /
• pp.99-106
• /
• 2011

Since the solar energy resource is the main input for sizing any solar photovoltaic system, it is essential to utilize the solar radiation data as an application and development of solar energy system increase. It will be necessary to understand and evaluate the insolation data. The Korea Institute of Energy Research(KIER) has begun collecting horizontal global insolation data since May, 1982 at 16 different locations in Korea and for the more detailed analysis, images taken by geostationary satellite may be used to estimate solar irradiance fluxes at earth"s surface. It is based on the empirical correlation between a satellite derived cloud index and the irradiance at the ground. From the results, the measured data has been collected at 16 different stations and estimated using satellite at 23 different stations over the South Korea from 1982 to 2009. The Result of analysis shows that the annual-average daily global radiation on the horizontal surface is 3.56 kWh/ $m^2$/day and estimated solar radiation fluxes show reliable results for estimating the global radiation with average deviation of -7.27 to +3.65% from the measured values.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 춘계학술발표대회 논문집
• /
• pp.104-110
• /
• 2008

This paper presents demonstration study results derived through field testing of a part load solar energized cooling system for the library of a cultural center building located in Gwangju, Korea. First operating demonstration system was set up in Gwangju in 2005. These system comprises the $200m^2$ evacuated tubular solar collector, a $6m^3$ heat storage tank. In a 2006, daily average of insolation showed about $506W/m^2$, the solar collector efficiency was 44%. In a 2007, daily average of insolation showed about$507W/m^2$, the solar collector efficiency was 42%. As a result, evacuated tubular solar collector kept the high efficiency for two years.

• 한국태양에너지학회 논문집
• /
• 제29권6호
• /
• pp.32-38
• /
• 2009

The effects of surface radiative properties on the radiant cooling of opaque surfaces under clear sky condition are studied. Two types of surfaces, one gray and the other selective, are compared. For the nighttime cooling, black surface gives the lowest plate temperature and on the other hand the ideal selective surface gives the highest temperature. The reverse is true when there is an insolation. Equivalent radiative heat transfer coefficient of radiant cooling without convection is about $1{\sim}7\;W/m^2-K$ for the range of values studied. The surface with black within the $6{\sim}13\;{\mu}m$ band else zero emissivity could be regarded as a black surface for the nighttime radiant cooling purposes. However, lower band limit of $4\;{\mu}m$ is preferred to $6\;{\mu}m$ for small insolation situations.

• 한국태양에너지학회 논문집
• /
• 제22권3호
• /
• pp.11-20
• /
• 2002

This paper proposed a MPPT(Maximum Power Point Tracking) control algorithm for PV(Photovoltaic) array based on a modified constant voltage control MPPT algorithm at low insolation. This method which combined a reference voltage control and a constant voltage control algorithm. In contrast to the typical conventional MPPT algorithm, the proposed method have been obtained high efficiency and good performance in all insolation intensity. The proposed algorithm is verified through simulation and experiment.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.496-499
• /
• 2006

The solar cells should be operated at the maximum power point because its output characteristics are greatly fluctuate on the variations of insolation, temperature and loads. To obtain maximum power from solar cell, photovoltaic system cell power system usually requires maximum power point tracking controller. This paper propose Maximum power point tracking method using zero slope of differential value of maximum power. The power compare method traces to maximum power point rapidly but oscillate on the maximum power point largely, when quantity insolation variation is big. The power compare method is traces to maximum power point slowly but oscillate maximum point on the maximum power point smally, when quantity insolation variation is small. To solve two problem of the power compare method, designed zero slope of differential value of maximum power.

• 한국조경학회지
• /
• 제42권1호
• /
• pp.41-49
• /
• 2014

본 연구는 미국 샌프란시스코시 수목 음영이 개별 건물 지붕 및 옥상에 입사되는 태양에너지 잠재량에 미치는 영향을 LiDAR를 이용한 고해상도 3차원 수치모델을 이용하여 공간적으로 정량화하였다. 최근 분산형 태양광 발전이 기후변화 대응에 중요한 부분으로 주목받고 있으나, 이러한 도심 태양광 발전은 주변부의 지형, 건물, 지붕모양, 수목 등의 음영에 의해 발전량이 제한되는 특성이 있다. 특히 건물 주변의 수목의 경우 도시열섬현상의 저감, 냉난방 에너지 수요량의 절감 등의 순기능과 태양광 발전량 감소의 역기능을 동시에 가지고 있어 두 가지 효용의 상충을 최소화하기 위해 해당 위치에 대한 공간적 분석이 요구된다. 샌프란시스코시 전체 건물 지붕면적의 태양에너지 총량은 년간 18,326,671 MWh으로, 수목의 음영에 의한 감소량은 326,406 MWh로 총량의 1.78%에 해당하였다. 건물지붕의 단위 면적당 일조량은 $34.4kWh/m^2/year$에서 $1,348.4kWh/m^2/year$ 범위로 산출되었다. 본 연구를 통해 도심 수목에 의한 건물별 일조에너지 감소량의 공간자료가 구축되었으며, 개별 건물지붕에 일조량의 변이를 주변 수목의 밀도, 평균수고, 수고의 분산값을 이용한 회귀모델을 통해 설명하였다. 본 연구는 도심수목의 환경적 순기능을 유지함과 동시에 태양광 발전 감소량의 최소화 할 수 있는 방법을 제공함으로써 지속가능한 도시를 구축하는데 기여할 것으로 기대된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.496-499
• /
• 1991

Photovoltaic system has very low energy conversion efficiency and the output characteristics of solar cell is varied by the Insolation quantity and the temperature. In order to improve the efficiency of photovoltaic system, the energy which has got from solar cell must be use maximum. In this paper, it was stimultaneous executed both MPPT control and instrumentation in order that the operating point of solar cell is located maximum power point, using the PWM inverter and micro-computer, which is for the purpose of acquiring maximum power from the solar cell. As a result, maximum power point tracking had carried out and the efficiency of photovoltaic system improved, even if insolation quantity and the temperature are varied.