• 제목/요약/키워드: Solar domestic hot water

검색결과 39건 처리시간 0.029초

태양열 이용기술 개발 현황 (Development of Solar Technology in Korea)

  • 강용혁;양윤섭
    • 태양에너지
    • /
    • 제18권2호
    • /
    • pp.1-17
    • /
    • 1998
  • 국내 태양열 이용기술 개발 현황을 분석하기 위해 기술의 중요성과 태양열의 특징을 소개한 후에 국내의 기술동향을 요소기술인 태양열집열기의 온수기, 산업용 중고온시스템 및 태양에너지건물이용기술순으로 분석하였다. 분석결과 우리나라의 기술수준은 저온이용분야인 온수급탕의 경우 실용화 수준이며, 산업용인 중고온분야는 기초 및 소비시장 확대에 의한 가격의 저렴화 및 정부의 지원정책으로 태양열에너지의 이용을 증대시킬 수 있을 것이다. 이어서 국내 일사량자원과 보급현황을 살펴본 후 대체에너지 기술개발 기본계획상의 중장기 목표와 각분야별 기술의 개요 및 특징을 소개하였다. 국제환경에 대응하면서 국내 태양열 이용 및 보급 확대를 위해서는 기술개발을 통하여 얻어진 결과들이 사장되지 않도록 경쟁성 확보 시점까지 지속적인 수요창출을 위한 경제성 확보를 위해 추가적인 보완연구, 실용화연구 및 실증시범연구 등이 필요하다.

  • PDF

자연대류형 태양열 온수기용 맨틀 축열조의 열전달 현상에 관한 연구 (Heat Transfer in a Horizontal Mantle Heat Exchanger for a Thermosyphon-driven Flat Plate Collector)

  • 조현정;서태범;강용혁
    • 한국태양에너지학회 논문집
    • /
    • 제21권3호
    • /
    • pp.43-50
    • /
    • 2001
  • A horizontal mantle heat exchanger for a thermosyphon-driven SDHW(solar domestic hot water) was numerically simulated and fluid flow and heat transfer in the annulus of the mantle heat exchanger were quantitatively investigated. The Reynolds number, the location of the inlet, and the gap of the annulus were selected as the important design variables. The effects of the design variables on the heat transfer characteristics were thoroughly studied. Based on the numerical results, a correlation for predicting the heat transfer coefficient was suggested as the conclusion of this study.

  • PDF

루프형태의 밀폐형 Thermosyphon의 작동특성과 시스템 모델링에 관한 연구 (A Study on the Operating Characteristics and System Modelling of Closed Loop Type Thermosyphon)

  • 강명철;강용혁;이동규
    • 한국태양에너지학회 논문집
    • /
    • 제22권2호
    • /
    • pp.39-47
    • /
    • 2002
  • The thermosyphon SDHWS and the loop type thermosyphon systems are widely used for domestic hot water system. The loop type thermosyphon is a circulation device for transferring the heat produced at the evaporator to the condenser area in the loop. In this study, the operating characteristics of various working fluids being used have been identified. The working fluids employed in the study were ethanol. water, and a binary mixture of ethanol and water. The volume of working fluid used in this study were 30%, 40%, 50%, 60% and 70% of evaporator volume. It is observed that, in the thermosyphon with low volume of working fluid, such as 30% or 40%, the fluid was dried out. The flow pattern and mechanism of the heat transfer were identified through this study. Flow patterns of the binary mixture working fluid were also investigated, and the patterns were recorded in the camera. The system parameters were calculated using the thermal performance data. Modelling of the system was carried out using PSTAR method and TRNSYS program.

히이트파이프를 이용한 태양열 온수급탕 시스템에 관한 기초 실험 연구 (An Experimental Study on the Utilization of Heat Pipes for Solar Water Heaters)

  • 천원기;강용혁;전명석;곽희열
    • 태양에너지
    • /
    • 제15권2호
    • /
    • pp.3-11
    • /
    • 1995
  • 본 논문은 히이트 파이프를 이용한 태양열 온수 급탕 시스템의 제작 및 그 열성능에 관한 내용이다. 국내 기후에 적합한 모델을 도출하기 위하여 본 연구에서는 여러번에 기초실증 실험을 수행하였다. 히이트 파이프는 구리로 제작하였으며 증발부, 단열부 및 응축부의 길이는 각각 1700mm, 100mm, 그리고 200mm이다. 증발부는, 특히 효율적인 집열을 위하여 얇은 구리로 만든 핀(fin)을 부착하였다. 연구결과를 살펴보면 작동 유체의 종류, 윅(wick)의 유무, 표면 처리 정도 그리고 그 밖의 여러 설계인자에 따라 히이트 파이프를 이용한 태양열 온수 급탕 시스템의 열성능이 적지 않은 영향을 받을 수 있음을 나타내고 있다.

  • PDF

에너지자립형 태양열 주택의 설계 및 시공 방법 체크리스트 수립 연구 (Design Checklist for Self-sufficient Zero Energy Solar House(ZeSH))

  • 윤종호;백남춘;유창균;김종일
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2005년도 춘계학술대회
    • /
    • pp.416-421
    • /
    • 2005
  • Most of solar system dissemination has been focused on domestic hot water system of which utilization to a building is relatively simple and safe than solar heating system. Through the survey on a cause of solar house dissemination failure in Korea, we conclude that design integration and systematic approach method for technology application are the most important element for a successful solar house. KIER(Korea Institute of Energy Research) and Hanbat National University have started new project on a development of Zero energy Solar House, called ZeSH which can be sustained just by natural energy without the support of existing fossil fuel. This is the 1st phase research of 10 years long-term ZeSH plan which develops a low-cost and $100\%$ self sufficient ZeSH. The goal of 1st phase ZeSH research is to get a $70\%$ self sufficiency only in thermal loads. Actual demonstration house, named KIER ZeSH I was designed and constructed as a result of 1st phase research work in the end of 2002. Various innovative technologies such as super insulation, high performance window, passive and active solar systems, ventilation heat recovery system are applied and evaluated to the KIER ZeSH I. A lot of computer simulations had been conducted for the optimal design and system integration in every design steps. Considering all the results from detailed hourly computer simulation, it is expected that at least $70\%$ self-sufficiency in thermal loads which is 1st phase target value can be excessively achieved in actual demonstration house. Besides, many valuable findings from the design and analysis to construction could be established such as collaboration method among the participants, practical design and construction techniques for system integration and the others. The purpose of this paper is to introduce the main findings through the development of KIER ZeSH I project. Practical guidelines in every design step for new low- or zero- energy solar house is proposed as result.

  • PDF

공기열원 2중히트싱크 열펌프의 성능해석 (Performance Analysis of Heat Pump System with Air Source Evaporator and Single Unit Dual Sink Condenser)

  • 우정선;이세균;이재효;박효순
    • 태양에너지
    • /
    • 제18권4호
    • /
    • pp.11-22
    • /
    • 1998
  • Floor panel heating system using hot water is the primary heating system of domestic residential building. This paper presents the results of performance analysis of the heat pump system with air source evaporator and single unit dual sink(SUDSk) condenser. The heat exchanger combines two separated condensers into a single condenser and the object of the SUDSk condenser is to release energy to dual sinks, i.e. air for air heating system and water for panel heating system in one single unit. Simulation program is developed for single unit dual source(SUDS) SUDSk heat pump system and some experimental data are obtained and compared with simulation results. Differences of heating capacity and COP in dual source operating mode are 7% and 8% respectively. Simulation results are in good agreement with test results. Therefore, developed program is effectively used for design and performance prediction of dual source dual sink heat pump system with SUDS evaporator and SUDSk condenser.

  • PDF

산업용 고효율 태양열집열기 개발 필요성 (Status of High-Efficiency Solar Collector for Industrial Utilization)

  • 곽희열
    • 태양에너지
    • /
    • 제18권2호
    • /
    • pp.19-29
    • /
    • 1998
  • 국내 소비 에너지 사용량의 약 97%를 수입에 의존하고 있고, 지구온난화와 관련된 환경문제가 심각하게 대두되고 있는 실정이다. 또한 우리나라 에너지 부문별 소비형태에서 47%를 차지하는 산업용의 에너지 소비는 대부분 유류애 의존하고 있고, 그 중에서도 제조부분의 소비가 91.5%로 나타나고 있어, 이 부분에 대체어네지원의 개발, 대체 시스템의 적용이 절실히 요구되고 있다. 우리 나라에서도 국가적 에너지 절약과 쾌적한 주거환경 및 생활의 편리함을 위해 기존 화석에너지로부터 무공해 청정에너지(Clean Energy)로 그 사용형태가 바뀌어 가는 지금 그 양과 질적인 면에서 무한정이고 무공해인 대체 에너지원으로서의 태양에너지는 다양한 이용분야가 개발되어 실용화되고 있다. 국�K의 경우 대표적으로 평판형 태양열집열기를 이용한 온수급탕 시스템을 들 수 있고, 냉난방, 산업공정열 및 태양열 발전 분야에 대한 실용화 및 타당성 연구가 활발히 진행되고 있다. 따라서 본 고에서는 태양열 시스템의 중요한 구성요소인 고효율 집열기술에서 산업용 응용($70{\sim}150^{\circ}C$)에 적합한 것으로 기대되는 진공유리관형 태양열집열기, 국내 외 기술개발 동향과 산업공정열의 대체 가능성에 대하여 기술하였다.

  • PDF

지역난방 공동주택의 에너지원별 원단위 사례분석 (Case Study on the Energy Consumption Unit of District Apartments)

  • 이왕제;강은철;이의준;오병칠;신우철
    • 설비공학논문집
    • /
    • 제26권10호
    • /
    • pp.474-480
    • /
    • 2014
  • This study investigated the total energy consumption and the energy consumption by type of 31 apartment complexes in Daejeon. The energy is supplied to the apartments from district heating, and can be divided into hot water, electricity, and gas. Hot water is used in for space heating and for domestic hot water (DHW), and electricity is used for plugs, cooling, ventilation, and public utilities (street lights, pumps, elevators, etc.). All gas supplied from district heating is used for cooking. As a result, the consumption unit of each energy source of independent dwelling areas was calculated to be $103.7kWh/m^2{\cdot}a$ ($15,692kWh/H{\cdot}a$) for thermal energy, $48.0kWh/m^2{\cdot}a$ ($4,646kWh/H{\cdot}a$) for electricity, and $10.5kWh/m^2a$ ($1,015kWh/H{\cdot}a$) for gas, so the entire consumption was calculated to be $162.3kWh/m^2{\cdot}a$ ($15,692kWh/H{\cdot}a$).