• 제목/요약/키워드: Solar array panel

검색결과 36건 처리시간 0.032초

A Novel Partial Shading Detection Algorithm Utilizing Power Level Monitoring

  • Wellawatta, Thusitha;Seo, Young-Tae;Choi, Sung-Jin
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2017년도 전력전자학술대회
    • /
    • pp.136-137
    • /
    • 2017
  • Maximum power point tracking (MPPT) under partial shading condition (PSC) is a challenging process in the PV array system. The shaded PV panel makes different peak patterns on the P-V curve and misguides the MPPT algorithm. Various kinds of global MPP (GMPP) detecting algorithms are used to overcome this issue. Generally, too frequent execution of GMPP tracking algorithm reduces the achievable power of PV panel due to time spent on the scanning process. Thus, partial shading detection algorithm is essential for efficient utilization of solar energy source. While conventional method only detects fast shading patterns, the proposed algorithm always shows superb performance regardless of the speed of partial shading patterns.

  • PDF

Study on Triaxiality Velocity of COMS induced by Wheel Off-loading

  • Park, Young-Woong;Kim, Dae-Kwan;Lee, Hoon-Hee
    • 한국우주과학회:학술대회논문집(한국우주과학회보)
    • /
    • 한국우주과학회 2008년도 한국우주과학회보 제17권2호
    • /
    • pp.36.3-36.3
    • /
    • 2008
  • KARI (Korea Aerospace Research Institute) is going to launch a Communication, Ocean and Meteorological Satellite (COMS) at summer of 2009. It will be first thing to be developed for a geostationary satellite through domestic technology. Of course, KARI has performed this development program with EADS Astrium in France since 2005. COMS has the non-symmetric configuration that the solar array is only attached on the south panel. Due to the configuration, momentum of satellite will be rapidly accumulated induced by solar pressure and then 3 wheels of large momentum are located on roll-yaw plane for attitude control. Therefore, to prevent the saturation of wheel momentum, wheel off-loading will be performed two times per day during 10 minutes for each one. At the moment, translation movement on 3-axes direction appears because of using thrusters. In this paper, strategy of the wheel off-loading and triaxiality which is the translation effect on 3-axes are introduced. Consequently, the result of optimized triaxiality considering the wheel off-loading strategy is summarized.

  • PDF

실제 데이터를 이용한 태양광 발전시스템의 시뮬레이션 (A Novel Simulation Method of PV Generation System using Field Data)

  • 박민원;김봉태;유인근
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2000년도 추계학술대회 논문집 학회본부 A
    • /
    • pp.52-54
    • /
    • 2000
  • In PV power generation system study, huge system apparatuses are needed in order to verify the effect of system efficiency and stability considering the size of solar panels, the sort of converter types, and the load conditions and so on. And also, under the same weather and load conditions it is impossible to compare a certain MPPT control scheme to others. In this paper, in order to obtain effective solutions for the above mentioned topics, the solar cell array is simulated with it's VI characteristic equations, and the real field data of weather conditions is interfaced to EMTDC using Fortran program interface method. Consequently the simulation of PV power generation system using field data is realized in this paper, and acceptable results, which show close match between the real data of PV panel and the simulated data, were obtained.

  • PDF

Performance of a Static Concentrator Photovoltaic Based on 4× Compound Parabolic Concentrator for Electric Vehicle Applications

  • Hoang Vu;Tran Quoc Tien;Nguyen Van Nhat;Ngoc Hai Vu;Seoyong Shin
    • Current Optics and Photonics
    • /
    • 제8권4호
    • /
    • pp.375-381
    • /
    • 2024
  • In this report, we present the design, fabrication, and experiment of a static solar system for electric vehicle (EV) applications. The static concentration component is composed of compound parabolic concentrators (CPCs) couplings with multi-junction solar cells, where a flat silicon panel is added to the bottom of the CPV structure to maximize power generation. This design allows the system to collect both direct sunlight and diffused sunlight. The CPCs were fabricated with acrylic with a geometric concentration ratio of 4×. We built a prototype with a (3 × 3) cell array of CPCs with a thickness of 25 mm, which is as thin as conventional flat photovoltaic panels, and performed an outdoor experiment that showed that after six hours of operation, the system had an acceptance angle of approximately 43° and an average daily efficiency of 22.85%.

계절적 변화에 따른 $TiO_2$ 염료감응형 태양전지의 발전 성능 분석 (Performance Analysis of the $TiO_2$ Dye-Sensitized Solar Cell according to Seasonal Changes)

  • 문병은;최은규;김종구;유영선;윤용철;김현태
    • 생물환경조절학회지
    • /
    • 제23권3호
    • /
    • pp.221-228
    • /
    • 2014
  • 본 연구는 염료감응형 태양전지를 이용하여 시간에 따른 일사량과 그에 따른 전력량의 분석을 통해 계절적 변화에 따른 온실 적용 염료감응형 태양전지의 효율에 관한 기초 자료 수집 및 분석을 목표로 하였다. 경상대학교 소재 온실 근처(위도 $35^{\circ}$ 9' 9.20" N, 경도 $128^{\circ}$ 5' 44.90" E, 고도 52m)에 태양전지 어레이를 설치, 2012년 8월, 10월, 11월, 2013년 2월 약 네 달 동안 태양전지가 받는 일사량과 그에 따른 전력량을 측정 및 비교, 분석하였다. 10월의 태양전지 패널 면적에 따른 일사량이 약 1,013.03MJ, 발생된 전력량은 약 4.87kWh로 네 달 중 가장 높게 측정되었고, 11월의 패널 면적에 따른 일사량이 약 755.25MJ, 발생 전력량은 약 3.34kWh로 가장 낮게 측정되었다. 염료감응형 태양전지의 평균 효율의 경우 8월 한 달간, 약 3.12%로 측정되었고, 10월 2.60%, 11월 2.39%, 2월 2.23%로 각각 측정되었다. 본 연구를 통해, 향후 염료감응형 태양전지의 온실 등 농업분야 적용 시 기초자료로 활용 할 수 있을 것으로 기대된다.

통신해양기상위성의 전이궤도 열해석 (TRANSFER ORBIT THERMAL ANALYSIS FOR COMS)

  • 전형열;김정훈;김성훈;양군호
    • 한국전산유체공학회지
    • /
    • 제13권2호
    • /
    • pp.48-54
    • /
    • 2008
  • COMS (Communication, Ocean and Meteorological Satellite) is a geostationary satellite and has been developing by KARI for communication, ocean and meteorological observations. It will be launched by ARIANE 5. Ka-band components are installed on South panel, where single solar array wing is mounted. Radiators, embedded heat pipes, external heat pipe, insulation blankets and heaters are utilized for the thermal control of the satellite. The Ka-band payload section is divided several areas based on unit operating temperature in order to optimize radiator area and maximize heat rejection capability. Other equipment for sensors and bus are installed on North panel. The ocean and meteorological sensors are installed on optical benches on the top floor to decouple thermally from the satellite. During the transfer orbit operation, satellite will be under severe thermal environments due to low dissipation of components, satellite attitudes and LAE(Liquid Apogee Engine) firing. This paper presents temperature and heater power prediction and validation of thermal control design during transfer orbit operation.

Research and Experimental Implementation of a CV-FOINC Algorithm Using MPPT for PV Power System

  • Arulmurugan, R.;Venkatesan, T.
    • Journal of Electrical Engineering and Technology
    • /
    • 제10권4호
    • /
    • pp.1389-1399
    • /
    • 2015
  • This research suggests maximum power point tracking (MPPT) for the solar photovoltaic (PV) power scheme using a new constant voltage (CV) fractional order incremental conductance (FOINC) algorithm. The PV panel has low transformation efficiency and power output of PV panel depends on the change in weather conditions. Possible extracting power can be raised to a battery load utilizing a MPPT algorithm. Among all the MPPT strategies, the incremental conductance (INC) algorithm is mostly employed due to easy implementation, less fluctuations and faster tracking, which is not only has the merits of INC, fractional order can deliver a dynamic mathematical modelling to define non-linear physiognomies. CV-FOINC variation as dynamic variable is exploited to regulate the PV power toward the peak operating point. For a lesser scale photovoltaic conversion scheme, the suggested technique is validated by simulation with dissimilar operating conditions. Contributions are made in numerous aspects of the entire system, including new control algorithm design, system simulation, converter design, programming into simulation environment and experimental setup. The results confirm that the small tracking period and practicality in tracking of photovoltaic array.

위성의 전이궤도 열해석 (TRANSFER ORBIT THERMAL ANALYSIS FOR SATELLITE)

  • 전형열;김정훈;김성훈;양군호
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2007년도 추계 학술대회논문집
    • /
    • pp.227-231
    • /
    • 2007
  • COMS (Communication, Ocean and Meteorological Satellite) is a geostationary satellite and has been developing by KARI for communication and ocean and meteorological observations. It will be launched by ARIANE 5. Ka-band components are installed on South panel, where single solar array wing is mounted. Radiators, embedded heat pipes, external heat pipe, insulation blankets and heaters are utilized for the thermal control of the satellite. The Ka-band payload section is divided several areas based on unit operating temperature in order to optimize radiator area and maximize heat rejection capability. Other equipment for sensors and bus are installed on North panel. The ocean and meteorological sensors are installed on optical benches on the top floor to decouple thermally from the satellite. During the transfer orbit operation, satellite will be under severe thermal environments due to low dissipation of components, satellite attitudes and LAE(Liquid Apogee Engine) firing. This paper presents temperature and heater power prediction and validation of thermal control design during transfer orbit operation.

  • PDF

다양한 사전하중에 적용할 수 있는 Ni-Cr wire와 Kevlar rope를 이용한 위성 분리장치 (The compatible non-explosive separation device for various pre-loads using the Ni-Cr wire and Kevlar rope)

  • 황현수;김병규;장영근
    • 한국항공우주학회지
    • /
    • 제41권2호
    • /
    • pp.150-155
    • /
    • 2013
  • 본 논문에서는 기존의 복잡한 구조를 가지는 비폭발식 분리장치를 단순화시켜 니크롬 와이어와 케블라 로프를 이용한 새로운 개념의 비폭발식 분리 메커니즘을 설계/제작하고 기초성능 평가(사전하중, 분리시간, 충격 실험 등)를 위한 실험을 수행하였다. 그 결과 니크롬 와이어의 회전횟수에 따라 다양한 사전하중 하에서 작동이 가능한 것을 확인하였고, 최대 6.0kN의 사전하중 하에서 110G의 충격을 발생시키며 680ms의 짧은 시간에 분리되는 것을 확인하여 제안된 분리장치의 유용성을 확인하였다. 추후 발사환경 및 우주환경 시험을 통하여 제안된 분리장치의 우주인증을 수행하고 다양한 사전하중에서 작동 신뢰도를 확보하여 태양 전지 패널의 전개뿐만이 아니라 페어링 분리 등 다양한 용도에 사용이 가능하도록 개발하고자 한다.

전자빔 조사중 유리의 전하축적 (Charge Accumulation in Glass under Electron Beam Irradiation)

  • 조재철;황종선
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2008년도 추계학술대회 논문집 전기설비전문위원
    • /
    • pp.235-236
    • /
    • 2008
  • Charging of spacecraft occurs in plasma and radiation environment. Especially, we focused on an accident caused by internal charging in a glass material that was used as the cover plate of solar panel array, and tried to measure the charge distribution in glass materials under electron beam irradiation by using a PEA (Pulsed Electro-Acoustic method) system. In the case of a quartz glass (pure $SiO_2$), no charge accumulation was observed either during or after the electron beam irradiation. On the contrary, positive charge accumulation was observed in glass samples containing metal-oxide components. It is found that the polarity of the observed charges depends on the contents of the impurities. To identify which impurity dominates the polarity of the accumulated charge, we measured charge distributions in several glass materials containing various metal-oxide components and calculated the trap energy depths from the charge decay characteristics of all glass samples.

  • PDF