• Transactions on Electrical and Electronic Materials
• /
• v.13 no.6
• /
• pp.278-282
• /
• 2012

Photovoltaic systems have emerged to be one of the cleanest energy systems. Therefore, many large scale solar parks and PV farms have been built to prepare for the post fossil fuel ages. However, due to their large scale, to efficiently manage and operate PV systems, they need to be visually monitored within the range of infrared ray through the Internet. To satisfy this need, the efficient implementation of a high performance video compression standard is required. This paper therefore presents an implementation of H.264 motion estimation, which is one of the most data-intensive and complicated functions in H.264. To achieve this, this work implements vector instructions in hardware and incorporates them in a generic RISC processor architecture, thus increasing the processing speed while minimizing hardware and software design efforts. Extensive simulation results show that this proposed implementation can process motion estimations up to 13 times faster.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.58-60
• /
• 2007

국내 신재생에너지의 보급은 정부 보조금 지원을 통해 국내 지역별로 다양한 형태, 발전 용량으로 보급되고 있다. 그 중에서도 태양광 발전의 주택보급과 산간지역의 풍력발전 보급은 발전 규모와 설비가 대형화 되어 가고 있다. 본 논문에서는 이러한 발전 시스템 지원을 위한 지역 기후 현황 분석과 발전 시스템과의 연계를 통해 특성을 분석하고자 하였다.

• Proceedings of the KIEE Conference
• /
• 2009.04b
• /
• pp.222-224
• /
• 2009

This paper proposes analysis data of generation efficiency with tracking method for solar tracking. Tracking algorithm of PV generation is divided the sensor method and program method. Generation efficiency is analyzed the three cases 1-high insolation, 2-low insolation, 3-rapidly changing insolation. Proposed data is possible to apply for development of novel algorithm with hybrid tracking method in this paper. Hereby, This paper is proved the benefit of analyzed data.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.4-6
• /
• 2020

태양광 모듈은 일사량과 온도에 의해 P-V 및 I-V의 특성이 변하여 최대 전력 점 추종 기업(MPPT, Maximum Power Point Tracking)이 필요하다. 기존의 기법들의 경우 모듈의 온도로 인해 개방전압이 변하거나 음영이 발생하면 태양광 모듈의 최대 전력 점을 추종하지 못한다. 본 논문에서는 태양광 패널에서의 P-V 및 I-V의 상관관계와 온도 변화에 대한 태양광 모듈의 최대 전력 점을 추종하는 기법을 제안한다. 본 논문에서 제안된 제어기법은 3kW 태양광 인버터 시스템을 구성하여 시뮬레이션을 통해 타당성을 검증하였다.

• Solar Energy
• /
• v.11 no.3
• /
• pp.3-8
• /
• 1991

There are fifteen solar radiation measurement stations over the entire country in Korea. However, they are not capable of supplying reliable solar radiation data for remote areas including islands. The un-manned automated insolation measurement station is suitable for these areas due to the electric power shortage and the maintenance problems at these isolated areas. Our main aim in this work is to develop a solar radiation measurement system which collects and stores data by itself utilizing a PV module and a battery as power source for entire system irregardless of the environmental condition. A developed KIER's prototype system along with an independent HWS reference system has been installed at the designated remote island, Dok-do. Global solar radiation has been measured every hour for a 6-month period of time by both systems at this site. A comparison between the measured solar radiation data by each system indicates that there is an excellent agreement showing average 3.0% of an absolute error. It has been observed that the 8-month average global solar radiation was $2,330W/m^2$ day at this island. We came to the conservative conclusion that the developed KIER system is applicable for measuring solar radiation and for supplying reliable fundamental design data for solar energy utilization system at the remote areas.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.117-120
• /
• 2004

As the maximum power operating point (MPOP) of photovoltaic (PV) power generation systems changes with varying atmospheric conditions such as solar radiation and temperature, an important consideration in the design of efficient PV system is to track the MPOP correctly. Although the efficiency of these Maximum Power Point Tracking algorithms is usually high, it drops noticeably in case of rapidly changing atmospheric conditions. This paper describes common MPPT control algorithm: Constant Voltage Control, Perturbation and Observation(P&O), Incremental Conductance (IncCnd) and proposes a new MPPT algorithm based on P&O algorithm. The conception and control principles of the proposed MPPT method are explained in detail and its validity of the proposed method is verified through several simulated results. As it doesn't use digital signal processor, this MPPT method has the merits of both a cost efficiency and a simple control circuit design. Therefore, it is considered that the proposed MPPT method is proper to low power, low cost PV applications.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.1
• /
• pp.62.2-62.2
• /
• 2013

It is considered that comets near the ecliptic plane have been injected into inner solar system from Kuiper-belt. Some of them are still active while others are dormant with no detectable tails and comae. These dormant comets have eccentric and/or inclined orbits, which are parameterized by Tisserand parameter TJ<3. In addition, dormant comets can be differentiated from asteroids based on the albedo, because they have low albedo (the geometrical albedos pv<0.1). The conditions of TJ<3 and pv<0.1 have been used as a criteria to discriminate dormant comets from asteroids. However, we must be more careful because there are 'contaminations' from the outer region, i.e. Jovian Trojans (5.05

• Journal of Electrical Engineering and Technology
• /
• v.5 no.4
• /
• pp.606-613
• /
• 2010

This paper proposes a novel current-based maximum power point tracking (CMPPT) method for a single-phase photovoltaic power conditioning system (PV PCS) by using a modified incremental conductance method. The CMPPT method simplifies the entire control structure of the power conditioning system and uses an inherent current source characteristic of solar cell arrays. Therefore, it exhibits robust and fast response under a rapidly changing environmental condition. Digital phase locked loop technique using an all-pass filter is also introduced to detect the phase of grid voltage, as well as the peak voltage. Controllers of dc/dc boost converter, dc-link voltage, and dc/ac inverter are designed for coordinated operation. Furthermore, a current control using a pseudo synchronous d-q transformation is employed for grid current control with unity power factor. A 3 kW prototype PV PCS is built, and its experimental results are given to verify the effectiveness of the proposed control schemes.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.63 no.4
• /
• pp.361-367
• /
• 2014

This paper is related to a new solar power conditioner for a built-in step-up chopper function. In the first step-up chopper proposed solar PV power conditioner for mutually connected in series with the input voltage of the bypass diodes are respectively connected to the positive terminal should install the mutual boosting chopper diode connected in series with the boost chopper switching element between the two power supply and at the same time the first and the second was connected to a second diode and a resonance inductor and a snubber capacitor in series with each other. And the common connection point between the bypass diode and the step-up chopper and the step-up chopper diode common connection point of the switching elements of the input voltage was set to the boost inductor for storing energy. In addition, between the step-up chopper and the step-up chopper diode and a switching element of a joint connection point of the first auxiliary diode and the second common connection point of the auxiliary diode was provided, the resonance capacitor. Between the step-up chopper and the step-up chopper diode and a switching element of a joint connection point and the common connection point of the resonance inductor snubber capacitor and connecting the third secondary diode, between two power supply lines is characterized by configuring the DC link capacitor bus lines in parallel. Therefore, it is possible to suppress the switching loss through, DC link bus lines, as well as there could seek miniaturization and weight reduction of the power conditioner itself by using a common capacitor of the non-polar non-polar electrolytic capacitor having a capacitor, the service life of the circuit can be extended and it is possible to greatly reduce the loss can be greatly improve the reliability of the product and the operation of the product itself.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.12
• /
• pp.559-564
• /
• 2014

The development of photovoltaic-thermal (PVT) technology has been introduced in recent years specifically to increase PV efficiency. One of the characteristics of PV systems is that the electricity generation increases as the solar radiation increases whereas the efficiency decreases because of high surface temperatures. Using a photovoltaic-thermal system, the surface temperature can be decreased by capturing the excess heat and the efficiency can be increased due to these characteristics. In this paper, three cases are introduced : 1) PV_r as the reference case, 2) PVT_a, which uses air as a heat source, and 3) PVT_w, which uses water as a heat source. Experiments were performed, analyzed, and compared to examine the effect of the PVT type on the efficiency of the system. The results showed that ETC($%/^{\circ}C$) efficiency of the PVT cases was increased versus the reference case due to decreasing surface temperature. Total efficiencies, which are electrical efficiency and thermal efficiency, for each PVT are tested and found to be 12.22% for PV_r, 29.50% for PVT_a, and 68.74% for PVT_w.