• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 추계학술대회
• /
• pp.359-360
• /
• 2010

In smart grid system which uses photovoltaic system, fuel cells and so on, a program implemented with C language is used for control and measurement. When using programs implemented with C language GUI is difficult to watch control and monitor the smart grid system. But LabVIEW is a graphical programming language and it is easy to design GUI screen and to manage many variables such as real-time output of electric power including solar cell, wind power system and fuel cell. This paper suggests LabVIEW and C-language TCP/IP communication for smart grid monitoring system i mplemented with C-language.

• Ocean and Polar Research
• /
• 제43권4호
• /
• pp.353-363
• /
• 2021

Fluorescent dissolved organic matter (FDOM) is referred to organic matter which absorbs efficiently solar radiation energy and fluorescence in the water column. The component and molecular structure of marine organic matter can be changed depending on the various substances and origins of organic matter, and then the organic matter has unique fluorescent properties. As the cutting-edge analytical techniques of optical measurement continuously developing from last few decades, a study on FDOM has been applied as a biogeochemical tracer to quantify the organic matter concentration and to investigate the behaviors and origins of organic matter. Especially, the marine environment around the Korean Peninsula is an ideal research area to study FDOM because of various oceanographic characteristics and the origins of organic matter. This study describes the general properties of FDOM and introduces the cycling and behaviors of marine organic matter based on the domestic research studies.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2022년도 추계학술발표대회
• /
• pp.995-996
• /
• 2022

본 논문에서는 태양광 발전에서 전류 측정 부면의 기존 센서를 사용한 방식에서 벗어나 센서를 사용하지 않고 전류를 측정하여 최대 전력점을 제어(MPPT)하는 방식을 제안한다. 이 시스템은 인공지능을 사용하여 전류를 예측, 추산하며, 최대 전력점을 보다 정확하고, 세밀하게 계산하여 추종한다. 그렇기에 본 논문에서는 이 시스템을 구축하기 위해 구성한 알고리즘을 제안한다.

• 한국태양에너지학회 논문집
• /
• 제27권3호
• /
• pp.117-125
• /
• 2007

This study proposes a CFD(Computational Fluid Dynamics) analysis as a method of verification of the designed-data and a supplement of the insufficient experiences in geothermal system, which shows a rapid growth among the renewable energies. The followings are the results. FLUENT 6.2.12 is used as a CFD tool on this study, with the equations of continuity, motion, energy for unsteady flow through pipes and k-epsilon turbulent model. S-type model which has one borehole with diameter 12m by depth 206m and T-type model which has 3 boreholes with $12m{\times}20m{\times}206m$ are proposed, and also the boundary conditions are described. The temperature differences between temperatures by CFD analysis and by on-site measurement are less than 1.5%, this shows a high reliability of CFD analysis process which this study proposes. After 11 days simulation operated 12 hours interval On/Off mode, it is clearly predicted that the outlet temperatures of geothermal pipes are increased by $1.2^{\circ}C$, and $2.2^{\circ}C$ after 4 months. And the outlet temperatures of geothermal pipes increased with increase of the mass flow rates through the pipes. T-type model shows that the 4m distance between boreholes are reasonable because the temperatures at 2m and 6m from boreholes are nearly same.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.357-357
• /
• 2012

The doping process of the solar cell has been used by furnace or laser. But these equipment are so expensive as well as those need high maintenance costs and production costs. The atmospheric pressure plasma doping process can enable to the cost reduction. Moreover the atmospheric pressure plasma can do the selective doping, this means is that the atmospheric pressure plasma regulates the junction depth and doping concentration. In this study, we analysis the atmospheric pressure plasma doping compared to the conventional furnace doping. the single crystal silicon wafer doped with dopant forms a P-N junction by using the atmospheric pressure plasma. We use a P type wafer and it is doped by controlling the plasma process time and concentration of dopant and plasma intensity. We measure the wafer's doping concentration and depth by using Secondary Ion Mass Spectrometry (SIMS), and we use the Hall measurement because of investigating the carrier concentration and sheet resistance. We also analysis the composed element of the surface structure by using X-ray photoelectron spectroscopy (XPS), and we confirm the structure of the doped section by using Scanning electron microscope (SEM), we also generally grasp the carrier life time through using microwave detected photoconductive decay (u-PCD). As the result of experiment, we confirm that the electrical character of the atmospheric pressure plasma doping is similar with the electrical character of the conventional furnace doping.

• 한국지반신소재학회논문집
• /
• 제15권3호
• /
• pp.49-55
• /
• 2016

본 연구에서는 부산 임기광산 광산폐기물 사면을 대상으로 강우 침투에 따른 지반내 불포화 특성변화를 살펴보기 위하여 불포화토 특성변화 측정유닛 및 시스템을 현장에 설치하였다. 불포화토 특성변화 측정시스템은 각종 측정유닛으로부터 측정된 자료를 저장, 관리 및 전달하는 시스템으로 Data Acquisition System(DAS), Solar System 및 불포화토 특성변화 측정유닛으로 구성되어 있다. 현장에 설치된 각종 측정유닛으로부터 측정된 강우, 체적함수비, 모관흡수력 등의 자료를 정리하여 분석하였다. 이들 결과를 살펴보면 강우시 체적함수비와 모관흡수력의 변화는 강우강도에 의해 크게 영향을 받으며, 강우시와 건기시 지표면 부근에서 가장 크게 증가하였다가 감소하는 것으로 나타났다. 그리고 현장에서 측정된 모관흡수력은 5-35kPa, 체적함수비는 0.12-0.24 범위에 존재하는 것으로 나타났다. 그러나 지하수위는 강우발생 직후 바로 증가하는 것이 아니라 2-3일의 시간이 경과한 뒤 증가함을 알 수 있다.

• 한국태양에너지학회 논문집
• /
• 제31권3호
• /
• pp.133-144
• /
• 2011

The objective of this study is to analyze the characteristic of radiation environment in the urban and rural through the field observation in the summer. The radiation balance was compared through the measurement of the shortwave radiation and long-wave radiation in the urban, sub-urban, and rural. The following conclusion could be obtained from this research. (1)In the results of observation including the rain-day, it was found that the short wave radiance in the urban is lower about 10% than the rural. (2)The upper part of atmosphere layers in the urban are aabsorb much short wave radiation energies compared with the rural relatively. It can increase the temperature of the upper part of atmosphere layers and the emittance of long wave radiation. (3)The ratio of the downward short wave radiation to the downward long wave radiation was 1.24 for the urban, 1.28 for sub-urban and 1.35 for rural. It can be estimated that the atmosphere condition of the rural is better than that of other areas. (4)The net radiation of the rural was lower that of the urban. It was found that the energy in and outflow of the rural is easier than that of the urban. (5)The temperature variation for the long-wave radiation change of the rural showed more sensitive than that of the urban. It was came from the radiation characteristics of the surrounding environment and can be used as the important index to evaluate the thermal environment characteristic of urban.

• 한국태양에너지학회 논문집
• /
• 제30권4호
• /
• pp.92-99
• /
• 2010

The purpose of this study is to apply pressurized plenum under floor air conditioning system to office areas to understand characteristics of indoor thermal environment based on forms of diffusers. For doing this, the author conducted experiment of module measurement, and based on the results, analyzed indoor temperature distribution and velocity distribution based on direction of diffusion by using Computational Fluid Dynamics(CFD), and estimated the Predicted Mean Vote(PMV) of residents based on forms of diffusers to present the optimal air conditioning of the pressurized plenum under floor air conditioning system in heating. The results of this study are as follows. First, as for forms of diffusers, distributed diffusers rather than conical and grill diffusers were favorable in maintaining $24^{\circ}C$, the established temperature in heating, were active in velocity flowing, and were wide in a radius of diffusion. Second, as for position of pressurizing, the difference between upper and lower temperature was wider in center, lateral, and dispersed pressurizing (in order). As for velocity distribution, the velocity was more increased in lateral, center, and dispersed pressurizing(in order), indicating that dispersed pressurizing maintained uniform thermal environment. Third, as for diffusion direction, mixed direction showed less difference between upper and lower temperature and the difference in velocity between center and lateral part was 0.01m/1, indicating that it maintained uniform thermal environment. Fourth, as for the PMV of residents based on the forms of diffusers, the dispersed type showed(+) values above (0) when applied variably based on the position of diffuser, presenting thermal feeling of "being comfortable" to residents.

• 한국태양에너지학회 논문집
• /
• 제30권4호
• /
• pp.9-14
• /
• 2010

The main cause of global warming is carbon dioxide generated from the use of fossil fuels, and active research on the reduction of carbon is in progress to slow down the increasing global warming. Wind turbines generate electricity from kinetic energy of wind and are considered as representative for an energy source that helps to reduce carbon emission. Since the kinetic energy of wind is proportional to the cube of the wind speed, the intensity of wind affects wind farm construction validity the most. Therefore, to organize a wind farm, validity analysis should be conducted first through measurement of the wind resources. To facilitate the approval and permission and reduce installation cost, measuring sensors should be installed at locations below the actual wind turbine hub. Wind conditions change in shape with air density, and air density is most affected by the variable sterrain and surface type. So the magnitude of wind speed depends on the ground altitude. If wind conditions are measured at a location below the wind turbine hub, the wind speed has to be extrapolated to the hub height. This correction of wind speed according to height is done with the Deacon equation used in the statistical analysis of previously observed data. In this study, the optimal Deacon equation parameter was obtained through the analysis of the correction of the wind speed error with the Deacon equation based on the characteristics of terrain.

• 한국태양에너지학회 논문집
• /
• 제32권3호
• /
• pp.88-95
• /
• 2012

In this study, in order to utilize the seawater as a heat source at Gangneung city near the East Sea in Korea, an annual heating performance of a screw heat pump was simulated. For a simulation, the maximum heating capacity of heat pump was assumed at 3.5 MW. An ambient temperature at Gangneung city was calculated from the TMY2 weather data, while the seawater temperature was calculated from the regression equation based on the measurement by the National Fisheries Research and Development Institute of Korea. The heating load was assumed linearly dependent on the ambient temperature, while the maximum heating load was assumed to appear when the ambient temperature is below $-2.4^{\circ}C$, which is the temperature of TAC 2.5% for heating at Gangneung city. A heat pump performance at full-load was calculated from the regression equation, which involves refrigerant's evaporating and condensing temperatures, based on a commercial screw compressor performance map. A heating supply temperature which determines refrigerant's condensing temperature was assumed linearly dependent on the heating load. A performance degradation due to the part-load operation of heat pump was also considered. Simulation results show that an annual heating coefficient of performance ($COP_H$) of a seawater-source screw heat pump is approximately 2.8 and that it is necessary to improve part-load performance to increase an annual performance of the heat pump.