• 반도체디스플레이기술학회지
• /
• 제10권3호
• /
• pp.43-47
• /
• 2011

Recently the government banners green growth promises as a paradigm of national development which are to reduce greenhouse gases and environmental pollution by exhaust gases from automobiles. Existing in all countries around the world by using fossil fuels to minimize environmental changes are developing a new alternative energy sources. Among the emerging alternative energy, using solar energy technology is applied across the industry, but the maintenance and repair to integrate solar cells and has been a problem occurs. To prolong the life of cells integrated on a solar cell is exposed when the non-eye, etc., when not integrated by the solar cells should not be exposed. In order to resolve these contradictions, a intellectual solar green street lighting was developed by using Q(Quick)-TRIZ.

• 반도체디스플레이기술학회지
• /
• 제10권2호
• /
• pp.19-23
• /
• 2011

Global warming is affecting all industries, and has been applied very quickly in the energy sector. Existing in all countries around the world by using fossil fuels to minimize environmental changes are developing a new alternative energy sources. Among the emerging alternative energy, using solar energy technology is applied across the industry, but the maintenance and repair to integrate solar cells and has been a problem occurs. To prolong the life of cells integrated on a solar cell is exposed when the non-eye, etc., when not integrated by the solar cells should not be exposed. In order to resolve these contradictions, a square solar flower of the biological mother was developed by using TRIZ technique(6SC).

• 한국산업융합학회 논문집
• /
• 제17권4호
• /
• pp.227-233
• /
• 2014

Information presented in this study is intended to inform candidates as they prepare to design and structure the floatovoltaics solar power system. A developed floatovoltaics solar power generation results from the combination of PV plant technology and PV floating technology. This floating-based PV system is a new concept for PV development. The PV floating technology opens new opportunities to give value to unused areas so far while preserving valuable land for more adapted activities. Therefore the land-use conflicts are avoided and the environmental impact is minimized. Therefore the technology offers an interesting opportunity to regions facing on drought during summer time without any negative impact to the eco-system. This study describe the basic components of a floatovoltaics solar power system. A typical system consist of floating system and solar modules, a control device, rechargeable batteries, a load or device and the associated electrical connections. The floating system is specifically designed to keep all metallic components above water leaving only 100% recyclable, closed cell foam filled HDPE plastic floats in contact with the water. As the first case that can maximize the power generation efficiency of PV internationally, it is expected that this study will be utilized as a primary guide for future development of floating type PV system.

• 방사선산업학회지
• /
• 제8권1호
• /
• pp.17-22
• /
• 2014

In this study, we prepared CdTe/CdS solar cells using a thermal vacuum evaporation method. In particular, $CdCl_2$ treatment was attempted using this same method at $400^{\circ}C$ for 30 min. The prepared CdTe/CdS solar cells were investigated using Fouier transform infrared spectrometry (FTIR), field emission scanning electron microscopy (FE-SEM), and a solar simulator system including light absorption properties, morphological properties, and power conversion efficiency (PCE). In addition, we investigated the gamma-irradiation treatment at dose rates of 0 Gy, 500 Gy, 1 kGy, 10 kGy, and 30 kGy. The characteristics of gamma-irradiation treatment were studied based on the same method described above. In particular, it showed increased values as 0.826% higher than the non-irradiation of 0.448% from PCE analysis.

• 한국산학기술학회논문지
• /
• 제14권10호
• /
• pp.4812-4818
• /
• 2013

본 논문은 한국의 식용 천일염 수요 및 공급 규모를 예측한 내용을 담고 있다. 2007년 염관리법 규정에 의해 식용으로 허용된 천일염은 그 이전에는 광물로 분류되어있었기 때문에 식용 천일염 관련 별도의 연도별 통계자료가 정비되어 있지 않은 실정이다. 최근 식용 천일염에 대한 소비자 수요증대와 더불어, 산업계에서 시장규모 파악 및 그 성장가능성에 대한 관심이 높다. 이 연구는 식용 천일염 수급 추정을 위한 관련 자료가 제한적인 상황에서 생산을 위한 기후여건, 생산업체 현황, 소비추세, 수출입 동향 등을 고려하여 식용 천일염 수요 및 공급규모를 예측하였다. 연구결과, 2013-2017년 동안 생산량은 222-384천 톤 수준, 수입량은 498-565천 톤, 수출량은 2.67-3.62천 톤, 소비량은 767-996천 톤 수준에 이를 것으로 예측되었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.226-229
• /
• 2006

현재 직면하고 있는 고유가 고착화, $CO_2$ 저감 의무화에 대비하기 위해서는 신재생에너지 보급 확대는 필수적이며, 현재로서는 신재생에너지 시설중 보급효과가 큰 분야가 바로 태양열시스템이다. 그런데 태양열시스템 보급을 확대하기 위해서는 시스템의 신뢰성 향상은 물론이고 보급이 효과적으로 확대될 수 있는 분야에 대한 시스템 적용기술의 개발에 따른 산업화이다. 여기서는 지금까지의 보급문제점, 기술개발 현황 및 산업육성 정책 분석을 통해 국내 태양열산업 발전방향을 살펴보았다.

• 한국태양에너지학회 논문집
• /
• 제33권6호
• /
• pp.98-104
• /
• 2013

At the moment, in Korea, over 90% of energy resources depend on imports, and nearly 60% of electric energy is produced using fossil fuel. Therefore, the government adopted the Climatic Change Convention and has implemented the RPS system since 2012 to actively cope with the dependence on imported energy, and to grow and expand the new renewable energy industry. This study examined the performance results of mandatory supply of solar photovoltaic energy and non-solar photovoltaic energy assigned to providers and the present state after implementation of the RPS system. As a result, the achievement rate in 2012 was 64.7%. Especially, solar photovoltaic energy showed a high achievement rate of 95.7%, whereas non-solar photovoltaic energy showed a low achievement rate of 63.3% due to several problems and was highly dependent on the government. In 2013, the burden of each provider has increased due to more mandatory supply and addition of unfulfilled supply of 2012, and the separate mandatory supply of solar photovoltaic energy established for protection of the solar photovoltaic market is restricting investment. Therefore, there is a need to assign mandatory supply in consideration of the available amount of each new renewable energy.

• Journal of the Korean Wood Science and Technology
• /
• 제20권1호
• /
• pp.5-14
• /
• 1992

Experimental external collector type solar lumber dryer of $1m^3$ of maximum capacity with $1.6m^3$ of collector area was designed and constructed. The seasonal performance of solar dryer, including air-conditions, energy efficiency, and drying characteristics of 3cm-thick red pine and douglas-fir lumber was investigated. Also, the economic analysis was carried out. Annual average solar drying rate was about 2 times faster than air-drying rate with no significant difference in the amount of drying defects. But in initial drying stage air-drying rate in winter was much faster and those in spring and autumn were slightly slower than solar drying rate in each season. Annual average energy efficiency of solar-dryer and-collector was 25% and 57%, respectively. Fuel savings were over 50% at 15% of energy inflation rate and the payback period was estimated as 6.10 years at 30% of energy inflation rate.

• 전력전자학회논문지
• /
• 제25권2호
• /
• pp.111-117
• /
• 2020

The photovoltaic module has the characteristic that the output power varies according to the amount of insolation. If partial shading occurs in an environment composed of an array, a number of local maximum power points (LMPPs) may be generated according to the shading state. Photovoltaic arrays require global maximum power point tracking due to variations in output characteristics caused by solar radiation and temperature. Conventional algorithms, such as P&O and Incond, do not follow the global maximum power point in a partial shaded solar array. In this study, we propose a technique to follow the global maximum power point by using the correlation of voltage, current, and power in solar arrays. The proposed control technique 2qw validated through simulation and experiments by constructing a 2-kW solar system.

• 한국산업융합학회 논문집
• /
• 제23권3호
• /
• pp.491-498
• /
• 2020

Recently, In the production line of batteries, charge and discharge tests are essential to verify battery characteristics. In this case, the battery charging uses a unidirectional AC/DC converter capable of output voltage and current control, and the discharge uses a resistive load. Since this method consumes energy during discharge, it must be replaced with a bi-directional AC/DC converter system capable of charging and discharging. Although it is difficult to replace the connected inverter part of the bi-directional AC/DC converter system due to the high cost, the spread of the solar-connected inverter rapidly increases as the current solar supply business is activated, and thereby the solar-connected type Inverter prices are plunging. If it can be used as a power converter for battery discharge without program modification of the solar-powered inverter, it will have competition. In this paper, propose a new battery discharge system using a combination of a photovoltaic DC/DC simulator and photovoltaic PCS using a battery to be used as a power converter for battery discharge without program modification of a low-cost photovoltaic inverter. In addition, propose an optimal solar characteristic curve for the stable operation of PCS. The validity of the proposed system was verified using a 500[W] class solar DC/DC simulator and a solar PCS prototype.