• 전력전자학회논문지
• /
• 제11권1호
• /
• pp.79-89
• /
• 2006

태양광발전시스템이 갖고 있는 전기적 출력특성이 일사량과 온도의 변화에 따라 크게 변화되므로 동일조건에서의 재현 또는 재실험이 불가능한 단점으로 실험적 분석에 대한 어려운 문제점을 갖고 있다. 태양광발전시스템의 실증적인 연구를 위하여 기후조건의 변화에도 실제 태양전지의 출력특성을 나타낼 수 있는 가상구현 시스템이 필요한데 이를 구현하기위한 기존의 이론적 모델은 온도와 일사량이 동시에 변화할 때 나타내지 못하는 약점이 있어 이론 보완하는 모델 연구가 우선적으로 필요하다. 따라서 본 논문에서는 태양전지 특성을 가상구현 할 수 있는 새로운 수학적 모델을 제안하였고 연구자가 원하는 특정조건이나 임의의 일사량과 온도에 대한 태양전지 특성을 가상구현 할 수 있음을 이론적 검토 및 시뮬레이션을 통하여 해석하였다. 또한 새로운 모델을 검증하기 위하여 태양전지 제조사의 데이터를 바탕으로 가상구현 태양전지 시스템을 실험해 비교해본 결과 최대전력점과 개방전압사이에서 5[%] 미만의 오차를 보여 태양전지 가상구현 시스템에 적용 타당성을 보였다.

• 한국태양에너지학회 논문집
• /
• 제31권6호
• /
• pp.32-39
• /
• 2011

This study is about the installation of the solar cell modules. The solar cell modules are built by the tree-mimic structure, and the performance is compared with that of the flat-plate type solar cell module installation. The mathematical tree model, which was suggested by Fisher and Honda, is utilized to determine the location of the solar cell modules for the tree-mimic type. The experiment shows that the generated electric power of the flat-plate type is higher than that of the tree-mimic type by 30% for one month of July. This lower performance for the tree-mimic type comes from the shading effects among the solar cell modules. The theoretical calculation for the absorbed solar radiation on the two types of solar cell installation shows that the tree-mimic type is higher than the flat-plate type by 8.5%. The shading area for the tree-mimic model is calculated with time by using the 3D-CAD, which will be utilized for the optimization of the tree-mimic model in the future.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.113-116
• /
• 2004

Output power of a photovoltaic system changes continuously as it strongly depends on the weather condition(isolation and temperature). Therefore, it is necessary the theoretical model realizes the electrical output characteristics of solar cell. Of several theoretical models for real solar cell, both parametric model and interpolation model are used widely. In this paper, we have propose a improved model of solar cell using its output characteristics that can be extended to calculate the rear solar cell characteristics at various temperatures and insolation. And more, the theoretical research of several models of solar cell using simulation analysis.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.639-643
• /
• 2001

Recently, photovoltaic system has been studied widely as a renewable energy system, because it does not produce environmental pollution and it has infinity energy source from the sun. A study on photovoltaic system has a lot of problems like as reappearance and repetition of some situation in the laboratory experiment for development of MPPT algorithm and islanding detection algorithm, because output characteristics of solar cell are varied by irradiation and surface temperature of solar cell. And this system is consisted a lot of solar cell unit. Therefore, the assistant equipment which emulates the solar cell characteristics which can be controlled arbitrarily by researcher is require to the researchers for reliable experimental data. In this paper, the virtual implement of solar cell (VISC) system is proposed to solve these problems and to achieve reliable experimental result on photovoltaic system. VISC system emulates the solar cell output characteristics, and this system can substitute solar cell in laboratory experiment system. To realize the VISC, mathematical model of solar cell is studied for driving converter and the DC/DC converters are compared in viewpoint of tracking error using computer simulation. And then analysis of parallel and series characteristics was done for combination of VISC model.

• Journal of Power Electronics
• /
• 제3권1호
• /
• pp.62-67
• /
• 2003

Recently, photovoltaic system has been studied widely as a renewable energy system, because it does not produce environmental pollution and it has infinity energy source from the sun. A study on photovoltaic system has a lot of problems like as reappearance and repetition of some situation in the laboratory experiment for development of MPPT algorithm and islanding detection algorithm. because output characteristics of solar cell are varied by irradiation and surface temperature of solar cell. Therefore, the assistant equipment which emulates the solar cell characteristics which can be controlled arbitrarily by researcher is require to the researchers for reliable experimental data. In this paper, the virtual implement of solar cell (VISC) system is proposed to solve these problems and to achieve reliable experimental result on photovoltaic system. VISC system emulates the solar cell output characteristics, and this system can substitute solar cell in laboratory experiment system. To realize the VISC, mathematical model of solar cell is studied for driving converter and the DC/DC converters are compared in viewpoint of tracking error using computer simulation. Output dynamic characteristic of PV array is varied by irradiation and PWM converter performance is studied using PSIM simulator.

• 전기학회논문지
• /
• 제58권3호
• /
• pp.486-495
• /
• 2009

This paper proposes a new methodology on reliability evaluation of a power system including solar cell generators (SCG). The SCGs using renewable energy resource such as solar radiation(SR) should be modeled as multi-state operational model because the uncertainty of the resource supply may occur an effect as same as the forced outage of generator in viewpoint of adequacy reliability of system. While a two-state model is well suited for modeling conventional generators, a multi-state model is needed to model the SCGs due to the random variation of solar radiation. This makes the method of calculating reliability evaluation indices of the SCG different from the conventional generator. After identifying the typical pattern of the SR probability distribution function(pdf) from SR actual data, this paper describes modelling, methodology and details process for reliability evaluation of the solar cell generators integrated with power system. Two test results indicate the viability of the proposed method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전력기술부문
• /
• pp.19-21
• /
• 2008

Renewable energy resources such as wind, wave, solar, micro hydro, tidal and biomass etc. are becoming importance stage by stage because of considering effect of the environment. Solar energy is one of the most successful sources of renewable energy for the production of electrical energy following wind energy. And, the solar/photovoltaic cell generators can not make two-state model as conventional generators, but should be modeled as multi-state model due to solar radiation random variation. The method of obtaining reliability evaluation index of solar cell generators is different from the conventional generators. This paper presents a basic study on reliability evaluation of power system considering solar cell generators with multi-states.

• 태양에너지
• /
• 제8권2호
• /
• pp.12-18
• /
• 1988

The effect of surface recombination current density on the saturation current density in Si solar cell has been studied. Theoretical model for surface recombination current was set up from emitter transparent model of M.A. Shibib, and saturation current of Si solar cell made by ion implantation method was also measured by digital electrometer. The theoretical surface recombination current density which is the same as saturation surface recombination current density in Shibib model was $10^{-11}[A/cm^2]$ and the measured value was ranged from $8{\times}10^{-10}$ to $2{\times}10^{-9}[A/cm^2]$. Comparing with the ideal p-n junction of Shockley, transparent emitter model shows improved result by $10^2$ order of saturation current density. But there still exists $10^2$ order of difference of saturation current density between theoretical and actual values, which are assumed to be caused by 1) leakage current through solar cell edge, 2) recombination of carriers in the depletion layer, 3) the series resistance effect and 4) the tunneling of carriers between states in the band gap.

• 전력전자학회논문지
• /
• 제14권5호
• /
• pp.372-378
• /
• 2009

태양광 발전시스템의 설치 용량이 증가함에 따라 시스템 효율을 개선하기 위한 연구가 활발히 진행되고 있다. 고성능 시스템의 설계 및 시험을 위해서는 태양전지의 모델링을 바탕으로 태양전지의 물리적 특성에 관해 정확히 이해하는 것이 중요하다. 그러나 태양전지의 모델은 다수의 파라미터가 얽힌 비선형 형태이며, 모델식의 파라미터 값을 얻기 위한 기존의 방식에서는 오차를 동반하는 실제와 다른 가정을 전제로 하므로 결과적으로 추출된 파라미터의 정확도가 저하되게 되는 단점이 있다. 따라서 본 논문에서는 제조사가 표준상태에서 측정하여 공개하는 태양전지의 I-V 커브로부터 다이오드의 이상계수와 역포화 전류를 구하고 이로부터 저항 성분이 없는 이상적인 태양전지의 I-V 커브를 도출한 뒤, 실측된 I-V 커브와 차이를 최소화하는 직·병렬 저항값을 추출하는 새로운 방식을 제안한다. 기존의 방식과 제안된 방식의 모델링을 통하여 얻은 파라미터를 이용해 구현한 I-V 커브와 실측 I-V 커브와의 상관관계를 최소자승법을 통해 계산함으로써 제안된 방법의 유용함을 증명하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.1374-1376
• /
• 2003

The output of solar cell or array depends on the weather conditions such as cell temperature and insolation level. If the output of the photovoltaic system would be regularly generated under any weather conditions, it is so easy to develop the inverter, its related system, and also control algorithm. This can be performed by the VISC(virtual-implemented solar cell) system studied in this paper. And a few I-V curves are provided by the manufacturers, and so any I-V value between the given curves is unknown. The new model for solar cell is proposed which is based on the interpolation. Both simulation and experiment are executed to show the validity of the proposed VISC system.