• Proceedings of the Optical Society of Korea Conference
• /
• 2007.07a
• /
• pp.159-160
• /
• 2007

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.10a
• /
• pp.234.2-234
• /
• 2003

• Bulletin of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.243-247
• /
• 2012

Photocatalysis has been applied to decompose the waste and toxic materials produced in daily life and in the global environment. Pure $TiO_2$ (Zn-$TiO_2$-0) and Zn-doped $TiO_2$ (Zn-$TiO_2$-x, x = 3-10 mol %) samples were synthesized using a novel sol-gel and ammonia-evaporation method. The Zn-doped $TiO_2$ samples showed high photocatalytic activity for the degradation of methylene blue (MB). The physicochemical properties of the samples were investigated using XRD, SEM, ICP, DLS and BET methods. In addition, the most important measurement of photocatalytic ability was investigated by a UV-vis spectrophotometer. The effects of the mol % of zinc ion doping in $TiO_2$ on photocatalytic activity were studied. Among the mol % Zn ions investigated, the Zn-$TiO_2$-9 sample showed the highest photoreactivity. This sample removed 91.4% of the MB after 4 h, while the pure $TiO_2$ only removed 46.4% of the MB.

• Journal of Magnetics
• /
• v.19 no.1
• /
• pp.64-67
• /
• 2014

$Ni_{0.6}Zn_{0.4}Fe_2O_4$ prepared using solid state reaction and sol-gel methods were compared for their structural and magnetic properties. Due to the much higher annealing temperature used in solid state reaction, the crystalline size was much larger than that of the nanoparticles prepared by sol-gel. The saturation magnetization of sol-gel nanoparticles was higher, and the coercivity was about 2 times larger, compared to the solid state reaction sample. By analyzing the integration intensity of x-ray diffraction peaks (220) and (222), we proposed that the difference in the saturation magnetization might be due to the inversion of cation distribution caused by the different preparation techniques used.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.9
• /
• pp.3453-3458
• /
• 2011

The $Mg_xZn_{1-x}O$ thin films with the various content ratio ranging from 0 to 0.4 were prepared by sol-gel spincoating method. To investigate the effects of content ratio on the structural and optical properties of the $Mg_xZn_{1-x}O$ thin films, scanning electron microscopy (SEM), X-ray diffraction (XRD), and photoluminescence (PL) were carried out. With increase in the content ratio, the grain size of the $Mg_xZn_{1-x}O$ thin films was increased, however, at the content ratio above 0.2, MgO particles with cubic structure were formed on the surface of the $Mg_xZn_{1-x}O$ thin films, indicating that the Mg content exceeded its solubility limit in the thin films. The residual stress of the $Mg_xZn_{1-x}O$ thin films is increased with increase in the Mg mole fraction. In the PL investigations, the bandgap and the activation energy of the $Mg_xZn_{1-x}O$ thin films was increased with the Mg mole fraction.

• Korean Journal of Materials Research
• /
• v.19 no.3
• /
• pp.125-131
• /
• 2009

In this report, the structural and optical properties of sol-gel derived $Mg_xZn_{1-x}O$ thin films upon changes in the composition and annealing temperature were investigated. The $Mg^{2+}$ content and the annealing temperature were varied in the range of $0{\leq}x{\leq}0.35$ and $400^{\circ}C{\leq}T{\leq}600^{\circ}C$, respectively. The films exhibited a hexagonal wurtzite structure of a polycrystalline nature. The optical transmittance exceeded 85% and the optical band gap of the film was tuned as high as 3.84 eV at a value of x = 0.35 (annealed at $400^{\circ}C$), which was evidently the maximum $Mg^{2+}$ content for the single-phase polycrystalline $Mg_xZn_{1-x}O$ thin films prepared in this experiment. The optical band gap and photoluminescence emission were tailored to the higher energy side while maintaining crystallinity without a significant change of the lattice constant.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.18 no.1
• /
• pp.50-55
• /
• 2008

AI-doped ZnO(AZO) thin films have been fabricated on glass substrate by sol-gel method, and the effect of Al precursors and post-annealing temperature on the characteristics of AZO thin films was investigated. The sol was prepared with zinc acetate, EtOH, MEA and Al precursors. In order to dope Al in ZnO, two types of aluminum nitrate and aluminum chloride were used as Al precursor. Zinc concentration was 0.5 mol/l and the content of Al precursor was 1 at% of Zn in the sol. The sol was spin-coated on glass substrate, and the coated films were annealed at 550ue for 2 hand were post-annealed at temperature ranges of $300{\sim}500^{\circ}C$ for 2 h in reducing atmosphere ($N_2/H_2$= 9/1). Structural, electrical and optical propertis of the fabricated AZO thin films were analyzed by XRD, FE-SEM, AFM, hall effect measurement system and UV-visible spectroscopy. Optical and electrical properties of AZO thin films prepared with aluminum nitrate as Al precursor were better than those of films prepared with aluminum chloride. The electrical resistivity and the optical transmittance of films decreased with increasing post-annealing temperatures. The minimum electrical resistivity of $2{\times}10^{-3}$ and the maximum optical transmittance of 91% were obtained for the AZO thin films post-annealed at $550^{\circ}C\;and\;300^{\circ}C$, respectively.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.11 no.2
• /
• pp.49-55
• /
• 2001

ZnO films were fabricated on p-type Si(100) wafer ITO glass and quartz glass by the sol-gel process using zinc acetate dihydrate as starting material. A homogeneous and stable solution was prepared by dissolving the zinc acetate dihydrate in a solution of 2-methoxyethanol and monoethanolamine (MEA). ZnO films were deposited by spin-coating at 2800 rpm for 25 s and were dried on a hot plate at $250^{\circ}C$ for 10 min. Crystallization of the films was carried out at $400^{\circ}C$~$800^{\circ}C$ for 1 h in air. X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM), UV-vis transmittance spectroscopy, FTIR transmittance spectroscopy and Photoluminescence (PL) spectroscopy measurements have been used to study the structural and optical properties of the films. ZnO films highly oriented along the (002)plane were obtained. In all cases the films were found to be transparent (above 70%) in visible range with a sharp absorption edge at wavelengths of about 380nm, which is very close to the intrinsic band-gap of ZnO(3.2 eV). The low temperature band-edge photoluminescence revealed a complicated multi-line structure in terms of bound exciton complexes and the phonon replicas.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.10
• /
• pp.2387-2392
• /
• 2009

A composite film of multi-walled carbon nanotube (MWCNT)/sol-gel-derived zinc oxide(ZnO)/Nafion has been utilized as an efficient immobilization matrix for the construction of a highly sensitive and stable tris(2,2'-bipyridyl) ruthenium(II) (Ru(${bpy)_3}^{2+})$ electrogenerated chemiluminescence (ECL) sensor. The electrochemical and ECL behaviors of Ru(${bpy)_3}^{2+})$ ion-exchanged into the composite film were strongly dependent upon the sol-gel preparation condition, the amount of MWCNT incorporated into the ZnO/Nafion composite film, and the buffer solution pH. The synergistic effect of MWCNTs and ZnO in the composite films increased not only the sensitivity but also the long-term stability of the ECL sensor. The present ECL sensor based on the MWCNT/ZnO/Nafion gave a linear response ($R^2$ = 0.999) for tripropylamine concentration from 500 nM to 1.0 mM with a remarkable detection limit (S/N = 3) of 15 nM. The present ECL sensor showed outstanding long-term stability (94% initial signal retained for 5 weeks). Since the present ECL sensor exhibits large response towards NADH, it could be applied as a transduction platform for the ECL biosensor in which the NADH is produced from the dehydrogenase-based enzymatic reaction in the presence of NA$D^+$ cofactor.

• Journal of the Korean Applied Science and Technology
• /
• v.40 no.5
• /
• pp.1116-1125
• /
• 2023

Zinc oxide film is a transparent conductive material and is used in optoelectronic devices in various fields. Therefore, characterization of the zinc oxide film will play a very important role in improving the performance of optoelectronic devices. Here, we will evaluate the morphological and structural characteristics of such a zinc oxide film based on the solution process. Specifically, the sol-gel method will be repeatedly performed to observe the change in material properties of the zinc oxide film according to the number of times of spin-coating. It was confirmed that crystallization proceeded as a result of performing the sol-gel method repetitively 5 times under constant solution conditions. At 7 times or more, the element composition and crystallinity tended to converge to a specific value. The average crystal size of the final zinc oxide film was calculated to be about 10.7 nm. In this study, the number of processes showing optimal crystallization was 7 times. The results and methodology of this study can be applied while varying various solution process variables and are expected to contribute to establishing optimal process conditions.