• Membrane and Water Treatment
• /
• v.6 no.4
• /
• pp.309-321
• /
• 2015

We report in this study the synthesis of mixed matrix reverse osmosis membranes by interfacial polymerization (IP) of thin film nanocomposite (TFNC) on porous polysulfone supports (PS). This paper investigates the synthesis of ZnO nanoparticles (NPs) using the sol-gel processing technique and evaluates the performance of mixed matrix membranes reached by these aerogel NPs. Aqueous m-phenyl diamine (MPD) and organic trimesoyl chloride (TMC)-NPs mixture solutions were used in the IP process. The reaction of MPD and TMC at the interface of PS substrates resulted in the formation of the thin film composite (TFC). NPs of ZnO with a size of about 25 nm were used for the fabrication of the TFNC membranes. These membranes were characterized and evaluated in comparison with neat TFC ones. Their performances were evaluated based on the water permeability and salt rejection. Experimental results indicated that the NPs improved membrane performance under optimal concentration of NPs. By changing the content of the filler, better hydrophilicity was obtained; the contact angle was decreased from $74^{\circ}$ to $32^{\circ}$. Also, the permeate water flux was increased from 26 to 49 L/m2.h when the content of NPs is 0.1 (wt.%) with the maintaining of lower salt passage of 1%.

• Korean Journal of Materials Research
• /
• v.21 no.1
• /
• pp.67-71
• /
• 2011

La doped CuO-ZnO-$Al_2O_3$ powders are prepared by sol-gel method with aluminum isopropoxide and primary distilled water as precursor and solvent. In this synthesized process, the obtained metal oxides caused the precursor such as copper (II) nitrate hydrate and zinc (II) nitrate hexahydrate were added. To improve the surface areas of La doped CuO-ZnO-$Al_2O_3$ powder, sorbitan (z)-mono-9-octadecenoate (Span 80) was added. The synthesized powder was calcined at various temperatures. The dopant was found to affect the surface area and particle size of the mixed oxide, in conjunction with the calcined temperature. The structural analysis and textual properties of the synthesized powder were measured with an X-ray Diffractometer (XRD), a Field-Emission Scanning Electron Microscope (FE-SEM), Bruner-Emmett-Teller surface analysis (BET), Thermogravimetry-Differential Thermal analysis (TG/DTA), $^{27}Al$ solid state Nuclear Magnetic Resonance (NMR) and transform infrared microspectroscopy (FT-IR). An increase of surface area with Span 80 was observed on La doped CuO-ZnO-$Al_2O_3$ powders from $25m^2$/g to $41m^2$/g.

• Journal of the Korean Chemical Society
• /
• v.54 no.6
• /
• pp.766-770
• /
• 2010

This is the study of magnetic properties of transition metal doped diluted magnetic semiconductors(DMSs). The wurtzite structure samples were synthesized by the sol-gel method. The thermodynamic characteristics and magnetic properties of $Zn_{1-x}Co_xO$ single phase was investigated for different doping concentration (x = 0%, 1%, 2%, 3%, 4%, 5%, 10%, 15%). The property of diluted magnetic semiconductors has been comfirmed by X-ray diffraction (XRD), Scanning Electronic Microscope (SEM) and Vibrating sample magnetometer (VSM). The magnetic properties of pure $Zn_{1-x}Co_xO$ is found to be dominated by the ferromagnetic interaction between doped transition metal ions, where by the ferromagnetic coupling strength is simply increased with the concentration(>5%) of the doped transition metal.

• Journal of Magnetics
• /
• v.10 no.1
• /
• pp.5-9
• /
• 2005

Nanoparticles $Ni_{0.9}Zn_{0.1}Fe_2O_4$ is fabricated by a sol-gel method. The magnetic and structural properties of powders were investigated with XRD, SEM, Mossbauer spectroscopy, and VSM. $Ni_{0.9}Zn_{0.1}Fe_2O_4$ powders annealed at $300{^{\circ}C}$ have a spinel structure and behaved superparamagnetically. The estimated size of $Ni_{0.9}Zn_{0.1}Fe_2O_4$ nanoparticle is about 10 nm. The hyperfine fields at 13 K for the A and B patterns are found to be 533 and 507 kOe, respectively. The ZFC curves are rounded at the blocking temperature ($T_B$)and show a paramagnetic-like behavior above $T_B$. $T_B$ of $Ni_{0.9}Zn_{0.1}Fe_2O_4$ nanoparticle is about 250 K. Nanoparticles $Ni_{0.9}Zn_{0.1}Fe_2O_4$ annealed at 400 and $500{^{\circ}C}$ have a typical spinel structure and is ferrimagnetic in nature. The isomer shifts indicate that the iron ions were ferric at the tetrahedral (A) and the octahedral (B). The saturation magnetization of nanoparticles $Ni_{0.9}Zn_{0.1}Fe_2O_4$ annealed at 400 and $500{^{\circ}C}$ are 40 and 43 emu/g, respectively. The magnetic anisotropy constant of $Ni_{0.9}Zn_{0.1}Fe_2O_4$ annealed at $300{^{\circ}C}$ were calculated to be 1.6 ${\times}$ $10^6$ ergs/$cm^3$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.719-723
• /
• 2004

Silica coating on ZnS particles with buffer solution has been investigated. Diluted sodium silicate in water was used as the precursor material and it was diluted in water. Sodium silicate was added drop-wise in the continuously stirred suspension of ZnS in the buffer solution at room temperature. Smooth and evenly distributed silica coated ZnS phosphors has been obtained when the pH of buffer solution was 10, the concentration of sodium silicate in water was 20 wt%, firing temperature was 500 $^{\circ}C$.

• Korean Journal of Materials Research
• /
• v.26 no.2
• /
• pp.84-89
• /
• 2016

We present the rectifying and nitrogen monoxide (NO) gas sensing properties of an oxide semiconductor heterostructure composed of n-type zinc oxide (ZnO) and p-type copper oxide thin layers. A CuO thin layer was first formed on an indium-tin-oxide-coated glass substrate by sol-gel spin coating method using copper acetate monohydrate and diethanolamine as precursors; then, to form a p-n oxide heterostructure, a ZnO thin layer was spin-coated on the CuO layer using copper zinc dihydrate and diethanolamine. The crystalline structures and microstructures of the heterojunction materials were examined using X-ray diffraction and scanning electron microscopy. The observed current-voltage characteristics of the p-n oxide heterostructure showed a non-linear diode-like rectifying behavior at various temperatures ranging from room temperature to $200^{\circ}C$. When the spin-coated ZnO/CuO heterojunction was exposed to the acceptor gas NO in dry air, a significant increase in the forward diode current of the p-n junction was observed. It was found that the NO gas response of the ZnO/CuO heterostructure exhibited a maximum value at an operating temperature as low as $100^{\circ}C$ and increased gradually with increasing of the NO gas concentration up to 30 ppm. The experimental results indicate that the spin-coated ZnO/CuO heterojunction structure has significant potential applications for gas sensors and other oxide electronics.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.604-604
• /
• 2013

차세대 반도체 분야인 스핀트로닉스 소자의 필수적인 물질인 강자성-반도체 하이브리드 물질인 Dilute magnetic semiconductor (DMS)에 관한 연구가 최근 많은 관심을 가지고 있다. 그중에서 넓은 에너지 밴드 갭 에너지(3.37 eV)를 가지고 있고 상온에서 엑시톤 결합 에너지가 ~60 mV로 광전자 소자, 전계 디스플레이 에 응용이 가능한 물질인 ZnO는 최근에 전이금속을 도핑하여 상온에서 강자성 특성을 나타내어 활발한 연구가 이루어지고 있다. 그러나, 이 물질에 대한 특성과 자성의 원인 규명에 관한 연구는 논란이 되고 있다. 본 연구에서는 Mn이 도핑된 ZnO 나노 입자를 만들고, Mn 물질의 도핑 농도에 따른 ZnO 나노 입자의 구조, 크기 및 자기 구조를 측정하여 구조와 자성의 상관관계에 관한 연구하였다. ZnxMn1-xO 나노 입자는 화학적 졸-겔(sol-gel) 방법을 이용하여 준비하였다. ZnxMn1-xO 나노 입자의 크기 및 격자 구조적 특징은 XRD (X-ray diffraction)와 TEM (Transmission Electron Microscope), SEM (Scanning Electron Microscope), SANS (Small Angle Neutron Scattering)를 이용하여 측정하였고 물질의 자기적 특징은 SQUID를 이용하여 조사하였다. Mn 도핑이 증가함에 따라 격자간격이 커지고 나노 입자의 크기는 감소하였으며, Zn와 Mn의 성장 시, 비율이 9:1의 경우에 상온에서 강자성 특성이 나타남을 보았다. 그 이상의 Mn 도핑 비율에서는 상자성 특성이 나타남을 보았다. 본 연구를 통하여 스핀트로닉스 소자 응용을 위한 ZnO 나노 입자에 최적의 Mn 도핑 농도를 제시하고 나노 입자의 자기 특성 형성의 원인 및 모델을 제시하였다.

• Journal of the Korean Magnetics Society
• /
• v.15 no.2
• /
• pp.100-105
• /
• 2005

$Ni_{0.9}Zn_{0.1}Fe_2O_4$ nanoparticles have been prepared by a sol-gel method. The structural and magnetic properties have been investigated by DTA/TGA, XRD, SEM, and $M\ddot{o}ssbauer$ spectroscopy, VSM. $Ni_{0.9}Zn_{0.1}Fe_2O_4$ powder that was annealed at $300^{\circ}C$ has spinel structure and behaved superparamagnetically. The estimated size of superparammagnetic Ni-Zn ferrite nanoparticle is around 10 nm. The hyperfine fields at 13 K for the A and B patterns were found to be 533 and 507 kOe, respectively. The blocking temperature ($T_B$) of superparammagnetic $Ni_{0.9}Zn_{0.1}Fe_2O_4$ nanoparticle is about 250 K. The magnetic anisotropy constant and relaxation time constant of $Ni_{0.9}Zn_{0.1}Fe_2O_4$ nanoparticle were calculated to be $1.6\times10^6\;ergs/cm^3$ and ${\tau}_0=5.0{\times}10^{-13}$ s, respectively. Also, Temperature increased up to $43^{\circ}C$ within 10 minutes under AC magnetic field of 7 MHz. It is considered that $Ni_{0.9}Zn_{0.1}Fe_2O_4$ powder that was annealed at $300^{\circ}C$ is available for biomedicine application such as hyperthermia, drug delivery system and contrast agents in MRI.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.439-439
• /
• 2012

ZnO 나노로드는 큰 밴드갭 에너지(~3.37 eV)와 60 meV의 높은 엑시톤 결합 에너지(exciton binding energy)를 갖고 있으며, 우수한 전기적, 광학적 특성을 지닌 1차원 나노구조의 금속산화물로서 태양전지 및 광전소자 널리 응용되고 있다. 이러한 ZnO 나노로드를 성장하는 방법 중에 전기화학증착법(electrochemical deposition method)은 전도성 물질위에 증착된 시드층(seed layer)을 성장용액에 담그어 전압을 인가하여 만들기 때문에 기존의 수열합성법(hydrothermal method), 졸-겔 법(sol-gel method)보다 비교적 간단한 공정과정으로 저온에서 빠르게 물질을 성장시킬 수 있는 장점이 있다. 한편, 디스플레이 산업에서 ITO (indium tin oxide)는 투명 전도성 산화물(transparent conductive oxide)로써 가시광 파장영역에서 높은 투과율과 전도성을 가지며, 액정디스플레이, LED (Light emitting diode), 태양전지 등의 다양한 소자에 투명전극 재료로 쓰이고 있다. 또한 최근 ITO를 유연한 PET (polyethylene terephthalate) 기판 위에 증착은 얇고, 가볍고, 휘어지기 쉬워 휴대하기 편하기 때문에 차세대 광전자소자 응용에 가능성이 크다. 본 연구에서는 ZnO 나노로드를 ITO/PET 기판위에 전기화학증착법으로 성장하여, 구조적 및 광학적 특성을 분석하였다. 시드층을 형성하기 위해 RF 마그네트론 스퍼터를 이용하여 ~20 nm 두께의 ZnO 박막을 증착시킨 후, zinc nitrate와 hexamethylenetetramine이 포함된 수용액에 시료를 담그어 전압을 인가하였다. 용액의 농도와 인가전압을 조절하여 여러 가지 성장조건에 대한 ZnO 나노로드의 구조적, 광학적 특성을 비교하였다. 성장된 시료의 형태와 결정성을 조사하기 위해, field-emission scanning electron microscope (FE-SEM), X-ray diffraction (XRD)을 사용하였으며, UV-vis-NIS spectrophotometer, photoluminescence (PL) 측정장비를 사용하여 광학적 특성을 분석하였다.

• Advances in nano research
• /
• v.13 no.5
• /
• pp.437-451
• /
• 2022

Synthesis approaches usually affect the physical and chemical properties of ferrites. This helps ferrite materials to design them for desired applications. Some of these methods are mechanical milling, ultrasonic method, micro-emulsion, co-precipitation, thermal decomposition, hydrothermal, microwave-assisted, sol-gel, etc. These methods are extensively reviewed by taking example of ZnFe₂O₄. These methods also affect the microstructure and local structure of ferrite which ultimately affect the physical and chemical properties of ferrites. Various spectroscopic techniques such as Raman spectroscopy, Fourier Transform Infrared spectroscopy, Ultra Violet-Visible spectroscopy, Mossbauer spectroscopy, extended x-ray absorption fine structure, and electron paramagnetic resonance are found helpful to reveal this information. Hence, the basic principle and the usefulness of these techniques to find out appropriate information in ZnFe₂O₄ nanoparticles is elaborated in this review.