• Bulletin of the Korean Chemical Society
• /
• 제17권2호
• /
• pp.158-162
• /
• 1996

The steady-state emission and fluorescence lifetimes of 1,3-dipyrenylpropane were measured in silicate sol-gel and xerogel matrices. In sol solution, the fluorescence emission spectra of monomer and excimer resemble those in hydrocarbon solvents. In gel and xerogel condition, however, the fluorescence spectra exhibit significant change, largely confirming the intramolecular motions in gel pores are influenced by microviscosity. The rate constants for intramolecular excimer formation were obtained from the measured fluorescence lifetimes and the rate processes for excimer forming in silicate sol-gel are described by a simple kinetic scheme.

• 한국세라믹학회지
• /
• 제24권5호
• /
• pp.447-452
• /
• 1987

${\alpha}$-Al2O3 powder was produced at 1000$^{\circ}C$ by the boehmite sol-gel process with seeding 2 wt% ${\alpha}$-Al2O3. The processes and mechanisms of fornation of ${\alpha}$-Al2O3 was investigated using DTA/TG, XRD, TR spectroscopy and thermodynamic analysis. The specific surface area of the obtained ${\alpha}$-Al2O3 was 16.3㎡/g.

• 한국세라믹학회지
• /
• 제37권5호
• /
• pp.425-431
• /
• 2000

Cobalt ferrite thin films on Corming glass substrate were fabricated by a sol-gel method. Cobalt ferrite thin films with the grain size of 20-35 nm and thickness of 50nm were obtained. Rapid thermal annealing (RTA) and Annealing processes were adopted for comparison of characteristics of the films. Coercivity values were changed with thermal condition and magnetization values were increased as a function of soaking time. With prolonged soaking time, however, it was decreased because of the diffusion of cations from the glass substrate. The RTA process in preparation of cobalt ferrite thin film was the effective way to prevent and to form a single spinel phase in reduced soaking time. The film heated at 600$^{\circ}C$ for 30 minutes by RTA had coercivity of 2,600 Oe, saturation magnetization 460 emu/㎤, and Mr$.$$\delta$ of 1.43 memu/$\textrm{cm}^2$.

• 한국전기전자재료학회논문지
• /
• 제25권4호
• /
• pp.315-320
• /
• 2012

In general, a photoelectrode in DSSC(dye sensitized solar cell) are fabricated by using the $TiO_2$ (Titanium dioxide) to realize high efficiency and the efficiency of DSSC is affected by the size, the shape and the property of $TiO_2$. We synthesized the crystalline $TiO_2$ by sol-gel method. In spite of many merits, only weakness for the sol-gel method is taking many process times. To solve this problem, we reduced the fabricating processes. The reduced process is the making process that is $TiO_2$ sol to $TiO_2$ powder with including of two heat treatment and two mixing. We could simplify the process by preparing $TiO_2$ sol to $TiO_2$ paste directly. As a result, DSSC fabrication process is simplified and we have obtained the efficiency best result 3.88% with $V_{OC}$=0.71 V, $J_{SC}=8.70\;mA/cm^{-2}$, and FF=62.37%, respectively.

• Macromolecular Research
• /
• 제10권6호
• /
• pp.325-331
• /
• 2002

Phase behavior of a PEO-PPO-PEO (Pluronic P103) triblock copolymer in water is investigated using small-angle neutron scattering (SANS), small-angle X-ray scattering (SAXS), dynamic light scattering (DLS) and rheology. Pluronic P103 shows apparent two gel states in different temperature regions. The first sol-to-gel transition at a lower temperature (i.e., the hard gel I state) turns out to be the hexagonal microphase as evidenced by the combined SANS and SAXS and the frequency dependence of both G′ and G" in rheology. In contrast to the hard gel I, the second sol-to-gel transition (i. e., the hard gel II state) at a higher temperature represents the block copolymer micelles in somewhat disordered state rather than the ordered state seen in the hard gel I. Moreover, turbidity change depending only on the temperature with four distinct regions is observed and the large aggregates with size larger than 5,000 nm are detected with DLS in the turbid solution region. Based upon the present study, two different gelation mechanisms for aqueous PEO-PPO-PEO triblock copolymer solutions are proposed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.42-45
• /
• 2003

Inorganic polymer based hybrid membranes consisting of zirconium oxide and polydimethylsiloxane (PDMS) have been synthesized by sol-gel processes. The hybrid membranes showed thermal stability and flexibility up to $300^{\circ}C$. The membrane becomes proton conducting polymer electrolyte when added with 12-phosphotungstic acid (PWA). The conductivity of the membranes was measured in the temperature range from room temperature to $150^{\circ}C$ under saturated humidity and a maximum conductivity of $5{\times}10^{-5}\;Sm^{-1}$ was obtained at $150^{\circ}C$.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1326-1331
• /
• 2003

Thick PZT films are required for the cases of micro actuators and sensors with high driving force, high breakdown voltage and high sensitivity, and so on. In this work, thick PZT films were fabricated by Sol-Gel multi-coating method. Total 8 types of samples using thick PZT films with thicknesses, about $1{\mu}m$ and $2{\mu}m$, and Pt top electrodes shapes for measuring transverse piezoelectric coefficient ($e_{31,f}$) were fabricated using MEMS processes. They were characterized by fabricated e31,f measurement system before and after poling. $e_{31,f}$ values of samples after poling were higher than before poling. Those of $2{\mu}m$ thick PZT films were also higher than $1{\mu}m$ thick PZT films. And those with long electrodes as top electrodes were also higher than shorter.

• 대한토목학회논문집
• /
• 제43권5호
• /
• pp.555-566
• /
• 2023

본 연구에서는 콘크리트 부재에 저온 적용을 위해 SOL-GEL 기법을 이용하여 제조된 열에너지 저장 복합상변화물질(CPCM)를 개발하였다. 코어는 테트라데칸, 지지재는 활성탄(AC)을 각각 사용하였다. 진공 함침법을 이용하여 AC의 다공성 구조에 테트라데칸 상변화 물질(PCM)을 함침시키고, 테트라에틸오르토실리케이트(TEOS)를 사용한 SOL-GEL 공정을 이용하여 제조된 복합체에 실리카 겔을 얇게 코팅하였다. CPCM의 열 성능은 시차주사열량계(DSC)과 열 중량분석(TGA)을 통해 분석했다. DSC 결과 테트라데칸 PCM은 용융 및 동결 온도가 각각 6.4℃ 및 1.3℃이고 해당 엔탈피는 각각 226J/g 및 223.8J/g인 것으로 나타났다. CPCM은 7.1℃ 및 2.4℃에서 용융 및 동결 과정에서 각각 32.98J/g 및 27.7J/g의 엔탈피를 나타내었다. TGA 시험 결과 AC는 500℃까지 열적으로 안정하며, 이는 120℃ 정도인 순수 테트라데칸의 분해 온도보다 훨씬 높은 것으로 나타났다. 또한, AC-PCM과 CPCM의 경우 각각 80℃와 100℃에서 열분해가 시작되었다. CPCM의 화학적 정성 분석을 위해 푸리에 변환 적외선(FT-IR) 분광법을 이용하였으며, 그 결과 개발된 복합체가 화학적으로 안정함을 확인하였다. 마지막으로, SOL-GEL 공정 후 AC 표면에 실리카 겔의 얇은 층이 존재함을 확인하기 위해 주사전자현미경(SEM)을 이용하여 AC와 CPCM의 표면 형태를 분석하였다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.131-131
• /
• 2003

The advent of photonic technologies in the field of communications and data transmission has been heavily increasing the demand in integrated optical (IO) circuits capable of accomplishing not only simple tasks like signal, but also more sophisticated functions like all-optical signal routing or active multiplexing/demultiplexing. In the last decade, sol-gel technology has been widely used to prepare optical materials. Sol-gel processes show many promises for the development of low-loss, high-performance glass integrated optical circuits. However, crack formation is likely to occur during heat treatment in thick gel films. In order to overcome the critical thickness limitation, the organic-modified silicate has been widely used. In this case coating matrices have been prepared from the organo-silanes of T structures, acidic catalyst and the as-prepared gel films have been heat-treated below 200$^{\circ}C$ to avoid the crack formation and the degradation of organic components. However, the films prepared in the acidic condition and the low heat temperature make the films contain high OH groups which is the major optical loss function. In this work, C$\sub$6/H$\sub$5/SiO$\sub$1.5/ films were prepared on silicon substrate by sol-gel method using base catalyst in a PTMS/NH$_4$OH/H$_2$O/C$_2$H$\sub$5/OH system. The sol showed spinable viscosity at 50 wt% of solid content, and neglectable viscosity change with time. The films were crack-free and transparent after curing at 450 $^{\circ}C$, and highly condensed to minimize OH content in C$\sub$6/H$\sub$5/SiO$\sub$1.5/ networks. The effects of heat treatment of the films are characterized on the critical thickness, the chemical composition and the refractive indices by means of SEM, FT-IR, TGA, prism coupler, respectively.

• 한국세라믹학회지
• /
• 제46권6호
• /
• pp.574-582
• /
• 2009

$UO_2$ microsphere particles, core material of HTGR(High Temperature Gas Reactor) nuclear fuel, were prepared using by the GSP(Gel Supported Precipitation) method which is a modified-method of the wet sol-gel process. The spherical shape of initial liquid ADU droplets from the vibration nozzle system was continuously kept till the conversion to the final $UO_2$ microsphere. But the size of a final $UO_2$ microsphere was shrunken to about 25% of an initial ADU droplet size. Also, we found that the composition of dried-ADU gel particles was constituted of the very complicated phases, coexisted the U=O, C-H, N-H, N-O, and O-H functional groups by FT-IR. The important factors for obtain the no-crack $UO_2$ microsphere during the thermal treatment processes must perfectly wash out the remained-$NH_4NO_3$ within the ADU gel particle in washing process and the selections of an appropriate heating rate at a suitable gas atmosphere, during the calcining of ADU gel particles, the reducing of $UO_3$ particles, and the sintering of $UO_2$ particles, respectively.