• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2006년도 춘계학술발표회 논문집
• /
• pp.527-531
• /
• 2006

Recently, the development project is conducting disaster effect estimation to breed disaster, and cope these disaster beforehand provoking soil erosion and flood. Therefore, it is became important to analysis and reduce of these disaster. In this study, receive value of LS and C factor of soil erosion through the digital image. The method of photogrammetry was employed for the efficient surveying and analysis of cutting slope using Remote Control Helicopter installed with a nonmetric digital camera. As a result, we obtain more objectivity value of soil erosion factor using digital image analysis.

• 한국환경복원기술학회지
• /
• 제10권4호
• /
• pp.83-94
• /
• 2007

Test application of revegetation measure was made on the roadside slope damaged by Gimcheon-Eomo national road improvement project in a bid to prevent the soil from being washed out as well as to restore the ecological environment, and the survey for assessing the effect of slope revegetation measures was conducted, beginning Sep 7 through Sep 20, 2006. In the wake of comprehensive reviewing and evaluating the surrounding topographic environment, physical and chemical characteristics of soil, germination of revegetation plants, analysis of bio mass, covering ratio and the plants appeared, revegetation measure C was found to have been most effective and desirable for further application in the area. Viewing the specific applicability by the area, revegetation measure C and C-1 appeared to be appropriate for blasting rock slope and ripping rock slope as they are efficient in preventing the slope from being washed out and in early revegetating. And revegetation measure B deemed to be effective to blasting rock slope or ripping rock slope as an alternative. And for cut slope, vegetation measure C-2 was judged to be more effective than measure D or E, while measure C-3 would be appropriateto embankment slope.

• 한국물환경학회지
• /
• 제25권5호
• /
• pp.785-791
• /
• 2009

Using artificial rainfall simulator, the soil loss, which is deemed as the most cause of muddy water problem among Non-point source (NPS) pollutant, was studied by the analysis of direct runoff, groundwater discharge, and soil water storage properties concerned with rainfall intensity, slope of area, and land cover. The direct runoff showed increasing tendency in both straw covered and bared soil as slope increases from 5% to 20%. The direct runoff volume from straw covered surface were much lower than bared surface. The infiltration capacity of straw covered surface increased, because the surface sealing by fine material of soil surface didn't occur due to the straw covering. Under the same rainfall intensity and slope condition, 2.4~8.2 times of sediment yield were occurred from bared surface more than straw covered surface. The volume of infiltration increased due to straw cover and the direct runoff flow decreased with decrease of tractive force in surface. To understand the relationship of the rate of direct runoff, groundwater discharge, and soil water storage by the rainfall intensity, slope, and land cover, the statistical test was performed. It shows good relationship between most of factors, except between the rate of groundwater storage and rainfall intensity.

• 한국지반공학회논문집
• /
• 제19권5호
• /
• pp.99-107
• /
• 2003

포장 시스템 내에서의 습기흐름과 열흐름은 상호간에 복합적인 작용을 하는 과정들로 인식되어 왔다. 습기의 흐름과 열흐름에 기인한 포장내에서의 습기와 온도의 분포는 계절적으로 변화할 뿐만 아니라 수직 그리고 수평적으로도 변화한다. 이 논문은 불포화토에서의 이차원 복합적인 습기와 열흐름에 대해서 유한요소법을 사용한 분석모델을 제시한다. 모델을 검증하기 위해 모델에 의한 분석결과는 Canada Alberta에 소재한 GEO-SLOPE사에 의해 개발된 소프트웨어인 GEO-SLOPE에 의해 분석된 결과와 비교하였다. 그리고 모델에서 사용된 입력데이터가 모델분석에 미치는 영향을 알아보기 위해 ASTM 방법에 의한 민감도 분석을 수행하였다.

• Geomechanics and Engineering
• /
• 제11권6호
• /
• pp.739-756
• /
• 2016

The shear strength reduction finite element method (SSRFEM) is a powerful tool for slope stability analysis. The factor of safety (FOS) of the slope can be easily calculated only through reducing effective cohesion (c′) and tangent of effective friction angle ($tan{\varphi}^{\prime}$) in equal proportion. However, this method may not be applicable to soil slope under wetting-drying cycles (WDCs), because the influence of WDCs on c′ and $tan{\varphi}^{\prime}$ may be different. To research the method of estimating FOS of soil slopes under WDCs, this paper presents an experimental study firstly to investigate the effects of WDCs on the parameters of shear strength and stiffness. Twelve silty clay samples were subjected to different number of WDCs and then tested with triaxial test equipment. The test results show that WDCs have a degradation effect on shear strength (${\sigma}_1-{\sigma}_3)_f$, secant modulus of elasticity ($E_s$) and c′ while little influence on ${\varphi}^{\prime}$. Hence, conventional SSRFEM which reduces c′ and $tan{\varphi}^{\prime}$ in equal proportion cannot be adopted to compute the FOS of slope under conditions of WDCs. The SSRFEM should be modified. In detail, c′ is merely reduced among shear strength parameters, and elasticity modulus is reduced correspondingly. Besides, a new approach based on sudden substantial changes in the displacement of marked nodes is proposed to identify the slope failure in SSRFEM. Finally, the modified SSRFEM is applied to compute the FOS of a slope example.

• 한국지반공학회논문집
• /
• 제17권6호
• /
• pp.123-133
• /
• 2001

대부분의 토사사면은 불포화상태로서, 이 경우 기존의 모관흡수력을 무시한 해석에 비해 보다 합리적인 결과를 얻을 수 있도록 대상 사면지반의 불포화 특성을 고려할 필요가 있다. 따라서 본 연구에서는 지반의 불포화 특성을 고려할 수 있도록 한계평형법에 의한 사면안정해석 프로그램을 보완하여 작성하였으며 임계단면 탐색을 위하여 최적화 기법을 적용하였다. 그리고 이와 같은 해석을 위한 불포화 설계변수를 얻기 위해 국내의 대표적 지반 재료인 화강풍화토에 대해 실험을 수행하였다. 실험자료 분석결과 불포화 강도특성을 안정해석에 적용하기 위해 모관흡수력에 따른 겉보기 점탁력 변화를 비선형성을 고려하여 수식화하였다. 또한 부피변화를 측정함으로써 함수특성곡선을 보다 정확하게 얻고자 하였다. 본 연구 결과를 통해 강우에 의한 침투로 야기되는 사면내부의 모관흡수력의 변화와 그에 따른 투수특성 및 강도특성변화를 고려함으로써 강우강도와 지속시간에 따른 안전율 변화를 보다 적절히 판단할 수 있었다.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.263-266
• /
• 2007

In this paper, analysis results on the failure of slope behind a Plant Complex of Gimhae due to typhoon Rusa in 2002 are introduced. The left side of the slope was reinforced by soil nails and the right side of the slope was going to construct slope reinforcement works. In the slope failure, the damage area is about $34,000m^2$, the lower width of slope failure is about 230m, the upper width of slope failure is about 50m, and the height of slope failure is about 120m. The elevation of a bedrock in the right side of the slope was lower than the left side of the slope. Due to the depth of weathered soils and weathered rocks in right side of the slope was thick, it will be expected that the effects of pore-water pressure during the rainfalls are large. For the analysis of the failure mechanism, 3-dimensional numerical analysis was carried out by FLAC-3D.

• 한국지반공학회논문집
• /
• 제25권12호
• /
• pp.13-25
• /
• 2009

본 연구에서는 확률론적 해석에 지반의 공간적 변동성을 고려하기 위한 해석 절차를 제시하였다. 제안된 방법은 한계평형법을 이용하는 결정론적 해석방법을 지반정수의 불확실성과 공간적 변동성을 고려할 수 있도록 확률론적 사면안정 해석으로 확장한다. 개발된 방법은 랜덤유한요소해석법과 같이 미리 임계파괴면을 가정하지 않으면서도 계산시간을 단축할 수 있다는 장점이 있다. 지정된 입력 확률분포함수와 자기상관함수를 따르는 2차원의 랜덤필드를 생성하기 위하여 Karhunen-Lo$\grave{e}$ve 전개법을 사용하였으며, 생성된 랜덤필드를 이용하여 확률론적 응답을 얻기 위해 Monte Carlo 시뮬레이션을 수행하였다. 개발된 해석기법의 적용성을 검토하고 지반정수의 공간적 변화가 확률론적 안정해석에 미치는 영향을 검토하기 위해 예제해석을 수행하였으며, 해석결과는 제안된 방법이 지반물성의 공간적 변동성에 따른 다양한 사면파괴 형태를 확률론적 사면안정 해석에 효과적으로 고려할 수 있음을 보여준다.

• 한국토양비료학회지
• /
• 제37권6호
• /
• pp.365-370
• /
• 2004

토양의 규산흡착 지표인 C-type slope에 영향하는 토양 특성을 탐색하고자, 모재가 상이한 8개 토양에 대하여 pH 5, 6, 7 및 8의 4개 수준에서 등온흡착실험을 하였다. 등온흡착실험결과 규산흡착량은 같은 평형농도에서 pH 증가에 따라 큰 폭으로 증가하였다. 같은 pH조건에서 규산흡착량은 평형농도의 증가에 따라 직선적으로 증가하였으며, 규산의 등온흡착형태는 C-type이었다. 등온흡착의 직선회귀 기울기인 C-tyre slope는 모든 토양에서 pH 증가에 따라 지수 함수적으로 증가하였다. Log(C-type slope)는 pH가 높아짐에 따라 모든 토양에서 고도의 유의성이 있게 직선적으로 증가하였으며, 토양별 직선회귀 기울기가 사촌통과 종곡통 외에는 0.29-0.34 범위로 유사하였다. 각 토양의 pH 변화에 따른 Log(C-type slope)의 직선회귀 기울기들은 대부분 토양특성들과 상관관계를 보이지 않았다. pH 7에서의 Log(C-type slope)와는 $Fe_o$ (oxalate 추출 Fe)만이 유의성이 있는 상관관계가 있었으며, 다중회귀 분석 결과도 여러 가지 토양특성들 중에서 $Fe_o$만이 유의성이 있는 기여도를 나타내었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1406-1416
• /
• 2008

Soil nailing is used as a method of slope stabilization and excavation support. The design method of soil nail are based on experience or assumption of interaction between soil and reinforcement. Most design methods simply considers the tension of reinforcement for analysis of slope stabilization. Soil nails interact with soils under combined loading of shear and tension. Jewell & Pedley(1990) suggested a design equation of shear force with bending stiffness and discussed that the magnitude of the maximum shear force is small in comparison with the maximum axal force. However, they have used a very conservative limiting bearing stress on nails. This paper discusses that the shear strength of soil nails should not be disregarded with proper bearing stresses on nails. The modified FHWA design method was proposed by considering shear forces on nails with bending stiffness.