• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.09a
• /
• pp.286-289
• /
• 2004

On site, In situ soil remediation technologies are very important among the remediation technologies and in general efficiency of these technologies are turned to site characterization and environmental condition. specially using of only one technology has so many limitation factors. for example, existing state of tailing and channeling and so on. actually, filled land have high concentration cation exchange capacity because of existence in abundance soil organic matter. Therefore we used various on site in Situ technologies by phase for overcome the limitation factors. Target site is petroleum (diesel) impacted filled land and using technologies are SVE(Soil Vapor Extraction), BV(Bioventing), Bioremediation, Soil flushing, Chemical oxidation.

• Journal of Ecology and Environment
• /
• v.32 no.2
• /
• pp.115-121
• /
• 2009

In order to elucidate the mechanisms affecting plant distributions in the reclaimed dredging area in the Gwangyang steelworks, in the Gwangyang Bay, Korea, we examined soil characteristics and plant distributions in four study sites and a control site in the study area. Desalination occurring along a gradient with increasing elevation, resulting in decrease of soil pH, EC, P, K, Cl, Ca, Mg, and salt and an increase in soil T-N, silt, clay contents. From site 1 (the lowest-elevation site) to site 5 (the highest-elevation site), halophytes decreased in abundance and nonhalophytes increased. The dominant species in each site were: Phragmites communis, Limonium tetragonum, and 12 additional species at site 1, Carex pumila, Suaeda japonica, and 15 additional species at site 2, Spergularia marina, Scirpus planiculmis, and 22 additional species at site 3, Miscantus sinensis, Lespedeza bicolor, and 26 additional species at site 4 and Pinus thunberii, Rhododendron mucronulatum, and 39 additional species at site 5, which resembled a naturally-occurring P. thinbergii community. Cluster analysis of the vegetation data matrix grouped the 35 plots into 5 major groups, and cluster analysis using the soil environment data matrix revealed 4 major groups. CCA of the floristic and environmental data matrix showed a positive relationship of SAR, EC, Na, Cl, and Ca, which are related to salt, in the $1^{st}$ axis and $2^{nd}$ axis, but negative relationships for altitude, organic contents, silt, and clay contents. Notably, plant species in the reclaimed dredging area that were separated along the $1^{st}$ axis showed strong relationships with factors that related to salt. Long-term exposure to natural rainfall in the reclaimed dredging area changed the soil characteristics, such as salinity. This change in soil characteristics might alter the SAR, which affects plant survival strategies in a given habitat. These results strongly indicated that factors related to salt and elevation play important roles in determining the overall plant distribution in the reclaimed dredging area.

• Korean Journal of Soil Science and Fertilizer
• /
• v.51 no.1
• /
• pp.50-60
• /
• 2018

This study was to evaluate the effect of organic amendments incorporation on soil properties and plant growth under two different soil salinity levels and various cultivated crops at Saemangeum reclaimed tidal land for three years from 2012 to 2014. The soil texture of the experimental site was sandy loam. Four different crops, sesbania (Sesbania grandiflora), sorghum-sudangrass hybrid (Sorghum bicolor-Sorghum sudanense), rice (Oryza sativa L.) and barley (Hordeum vulgare) were cultivated at low (< $1dS\;m^{-1}$) and high (> $4dS\;m^{-1}$) soil salinity levels. The soil salinity was significantly lowered at the rice cultivation site compared to continuous upland crops cultivation site in high soil salinity level. But the soil salinity was increased as cultivating sesbania coutinuously in low soil salinity level. The soil organic matter content was increased with the incorporation of straw at the continuous site of rice and barley, and the average of soil organic matter was increased by $0.9g\;kg^{-1}$ per year which was effective in soil aggregate formation. The highest biomass yield plot was found in barley (high salinity level) and sesbania (low salinity level) cultivation site, respectively. Our research indicates that rice cultivation in paddy field with high salinity level was effective in lowering soil salinity and sesbania cultivation was useful to biomass production at upland with low salinity. In conclusion, soil salinity and organic matter content should be considered for multiple land use in newly reclaimed tidal land.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.1
• /
• pp.9-15
• /
• 2012

This study was performed to produce basic data for silty reclaimed tidal lands and to develop techniques of environmentally-friendly utilization in agricultural system. We chose the two sites in Saemangeum reclaimed tidal lands, one (Site I) has been treated with cultivating green manure and conducting the desalinization process through submergence since April, 2007 and the other (Site II) has been under natural condition without artificial treatment. In situ and ex situ physic-chemical properties were determined and comparisons were made for soil profiles examined at these two sites in April 2009. Surface soil of Site I had lower EC and higher field saturated hydraulic conductivity than those of Site II, uncultivated land. Especially, exchangeable sodium content was lowest in Site I Ap1 layer than in other layers. This is probably due to flooding desalination and green manure cultivation. Besides, Ap1 and A2 layers of soil profile in Site I showed brighter soil color and more root observation than those of Site II. This is probably due to green manure cultivation. By the large, for high cash upland crops and intensive agricultural use of silty reclaimed tidal land, site-specific soil ripening such as flooding desalination and green manure cultivation could be useful.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.11 no.1 s.53
• /
• pp.59-65
• /
• 2007

Site classification of IBC and KBC is based on the ft-kips unit system and is not friendly for the linear interpolation of the site coefficients due to the implicit relationship between a site class and site coefficients, defining a site class by the range of the soil properties, not by a single soil property. Also, the site class definition of KBC has too wide range of soil properties for each soil class. making the structural engineers difficult to estimate the site coefficients for the diverse soil layers. In this study, a new site classification in SI unit system was proposed for the seismic design codes of KBC etc., and the comparison of the site coefficients of $F_{a}\;and\;F_{v}$ was also performed to investigate the possibility of the linear interpolation of the site coefficients with the proposed new site classification. According to the study results, it was more reasonable for the linear interpolation of the site coefficients to utilize the proposed new site classification considered the Sl unit system and the soil characteristics of the 30m soil layer beneath the shallow embedded foundation, and the linear interpolation of the acceleration coefficients for the design spectrum can be performed more reasonably defining the site coefficients for the representative shear wave velocities of each site class. With the study results, a new site classification, and the linear interpolation permitted acceleration coefficients fer the design spectrum were proposed for the modification of the seismic design regulations of KBC.

• Nuclear Engineering and Technology
• /
• v.56 no.7
• /
• pp.2452-2457
• /
• 2024

To obtain site-specific values of the Derived Concentration Guideline Levels (DCGLs) for decommissioning of KRR-1&2, the soil density and distribution coefficient values for Cs-137, a major contaminant radionuclide, were determined. The soil density was evaluated according to the test method established by the Korean Agency for Technology and Standards of the Ministry of Trade, Industry, and Energy (KATS). The distribution coefficient was evaluated using a batch test. The validity of using the evaluated soil density and distribution coefficient as site-specific values was assessed through radiation dose assessment reflecting these values. Average soil density value obtained was 1.738 g/cm³, which was within the typical range of normal soil density, 1.0-1.8 g/cm³. The average distribution coefficient value was 7,754 mL/g. Applying the maximum, average, and minimum values of the evaluated soil density and distribution coefficient showed similar radiation dose results, thus suggesting that it is reasonable to use the average values of each parameter as site-specific values. Findings of this study can help determine DCGLs that reflect the characteristics of the research reactor site.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.8 no.2
• /
• pp.97-106
• /
• 2006

Site index is an essential tool to estimate forest productivity. Generally, a site index equation is developed and used from the relationship between stand age and dominant tree heights. However, there is a limit to the use of the site index equation in the application of variable ages, environmental influence, and estimation of site index for the unstocked forest. Therefore, it has been attempted to develop a new site index equation based on various environmental factors including site, climate, and topographical variables. This study was conducted to develop a site index equation based on the relationship between site index and environmental factors for the species of Pinus koraiensis in Yangpyung-Gun, Gyunggi Province. The influence of climatic factors (temperature and solar irradiation ratio), topographical factors (elevation, slope, ratio of slope to valley and aspect) and soil profiles (soil depth by layer and soil consistency) on site index were evaluated by multiple regression analysis. Five environmental factors were selected in the final site index equation for Pinus koraiensis. The site index equation developed in this study was also verified by three evaluation statistics: model's estimation bias, model's precision, and mean square error of measurement. Based on the site index equation, the number of productive areas for Pinus koraiensis were estimated by applying GIS technique to digitized forest maps. In addition, the distribution of productive areas was compared with the areas of current distribution of Pinus koraiensis. It is expected that the results obtained in this study could provide valuable information about the amount and distribution of productive areas for Pinus koraiensis reforestation.

• Journal of Soil and Groundwater Environment
• /
• v.27 no.spc
• /
• pp.1-18
• /
• 2022

A conceptual site model is used to support decision-making of response strategy development, determination, and implementation within a risk-based contaminated site management system. It aims to provide base information of the relevant site characteristics and surface/subsurface conditions in order to understand the contaminants of concern and the associated risk they pose to the receptors. This study delineated the technical details of conceptual site model development, and discussed the possibility of applying it in domestic subsurface contamination management. Conceptual site models can be developed in various formats such as tables, diagrams, flowcharts, and figures. Contaminated sites are managed for a long period of time following the steps of investigation, remediation design, remediation, verification, and post-remedation management. The conceptual site model can be enhanced in each stage of the contaminated site management based on the continuously updated information on the site's subsurface environment. In the process of enhancement for conceptual site model, precision is gradually improved, and it can evolve from a conceptual and qualitative form to a more quantitatvive and three-dimensional model. In soil pollution management, it is desirable to incorporate the conceptual site model into the soil scrutiny system to better assess the current status of the contaminated site and support follow-up investigation and management.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1C
• /
• pp.63-74
• /
• 2008

Site response analyses were performed based on equivalent linear technique using the local geologic and dynamic site characteristics, which include soil profiles, shear wave velocity profiles and depth to bedrock for 125 sites collected in Korean Peninsula. From the results of site response analyses, 2-parameters site classification system based on the combination of mean shear wave velocity of soil and depth to bedrock was newly recommended for regions of shallow bedrock depth in Korea. First, as the borders of bedrock depth (H) for site classification were determined as 10m and 20m, the soil sites were divided into 3 classes as $H_1$, $H_2$ and $H_3$ sites. And then, the 3 site classes were subdivided into 7 classes based on the mean shear wave velocity of soil ($V_{s,soil}$). The feasibility of new site classification system was verified and the representative site coefficients ($F_a$ and $F_v$) and design response spectrum were suggested by analyzing uniform trend and dispersion of site coefficients for each site class. The suggested site coefficients and the regression curves present the nonlinear characteristics of soils according to the change of rock outcrop acceleration with uniform trend effectively. From the comparison between the mean values of response spectrum which was acquired from the site response analysis and the suggested design response spectrum, there was a little difference in some of site classes and it was verified to adjust the integration interval to make it more suitable for the site condition in Korea.

• International journal of advanced smart convergence
• /
• v.9 no.1
• /
• pp.19-28
• /
• 2020

We studied the on-site treatment of soil contaminated by heavy metals and petroleum was tested using relocatable soil washing equipment for greater remediation efficiency. Different combinations of pH and solid/liquid ratio were tested to determine the optimum balance, settling on values of 5 and 1:2, respectively. Next, soils containing Pb, Hg, and petroleum were further tested to assess the optimum number of washing cycles. The remediation efficiency of Pb and Hg in soil contaminated solely by heavy metals was 90.1% and 86.4% after three and two washings, respectively. The remediation efficiency of petroleum in soil contaminated solely by petroleum was 98.8% after one washing. When soil contaminated by both heavy metals and petroleum was cleaned, up to 91.0% of Pb, 86.9% of Hg, and 96.1% of petroleum was removed after two, one, and one washings, respectively. We conducted all remediation efficiencies and concentration reductions satisfied the standard threshold for soil contamination in South Korea.