• 한국지하수토양환경학회지:지하수토양환경
• /
• 제15권2호
• /
• pp.18-23
• /
• 2010

Usability of soil quality monitoring network for ascertaining soil quality changes was evaluated by analysing soil quality monitoring results. Tolerance limits of soil quality monitoring results from 1997 to 2007 were calculated and compared with Korean soil quality standards. This study determined that soil quality was changed if the upper 95% tolerance limit value was greater than the soil quality standard. Fluoride most frequently exceeded the soil quality standard and nickel, zinc, arsenic, copper, lead and cadmium were followed. Analysis on land use showed that tolerance limits of industrial land use most frequently exceeded the soil quality standards and residential, road and various land uses then frequently exceeded. Tolerance limits of land uses expecting high contaminant loads frequently exceeded the soil quality standards. This fact imply that the soil quality monitoring network generates reasonable data to represent change in Korean soil quality. This study also suggested that representative sampling from well identified points should be done to improve data reliability and accurately ascertain soil quality changes.

• 한국환경복원기술학회지
• /
• 제11권4호
• /
• pp.1-11
• /
• 2008

This paper analyzed the status of contaminated soils in order to manage it efficiently in Incheon using Geographic Information System (GIS) and investigated the concepts and techniques of the GIS and interpolation method. GIS technique is applied to the analysis of soil quality monitoring data. The purposes of this research are to assess the soil contamination of Incheon metropolitan area and to analyze the existing contents of heavy metals (Cd, Cu, As, Hg, Pb, $Cr^{+6}$) and pH in soil. The samples had been collected from year 1998 to year 2002 by the Soil Contamination Monitoring Network. The soil quality monitoring results were imported with the geographical information of the monitoring programs in capital area. It is found that currently available GIS technique has a great extend of potential for soil quality management. From the analysis of soil quality monitoring results, the GIS application demonstrates the poor soil quality in the central capital area and the it is improved as it travels down to the suburb area. Concerning about the data interpolation, the discrepancy caused by applying different method was ignorable, although Kriging method is further developed.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.195-197
• /
• 2003

Soil moisture is a crucial variable in research works of hydrology, meteorology and plant sciences. Adequate soil moisture is essential for plant growth; excesses and deficits of soil moisture must be considered in agricultural practices. There are already several remote sensing methods used for monitoring soil moisture, such as thermal inertia, vegetation water-supplying index, crop water stress index and multi-factor regression. In this paper, an improved method has been discussed which is based on the thermal inertia. We analyzed the problems of monitoring soil moisture using satellites at first, and then put forward an simplified method which directly uses land surface temperature differences to measure soil moisture. Also we have taken the influence of vegetation into account, and import NDVI into the model. The method was used in the study of soil moisture in Heilongjiang Province, China, and we draw the conclusion by the experiments that the model can evidently increase the precision of monitoring soil moisture.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제18권2호
• /
• pp.19-26
• /
• 2013

This study developed the classification of National Soil Quality Monitoring Network (NSQM) and its site selection criteria to meet the recently established purposes of the NSQM. The NSQM were suggested by this study to classify into the six-purposes site groups from the current classification of land uses. The six purposes site groups were 1) intensive observation sites, 2) contaminant loading sites, 3) human activity sites, 4) background sites, 5) river soil sites, and 6) sites near the groundwater quality monitoring wells. Furthermore, this study developed the site selection criteria of NSQM utilizing the accumulated NSQM data, road traffic data, chemical emission data, census, soil information, and the literature related to soil quality variation due to contaminant loads. For selecting suitable sites for NSQM, this study used road traffic, chemical emission, the distance from the contaminant sources, and population information as specific criteria. The suggested site classification and criteria were appled for the current 100 NSQM sites for evaluation. Forty sites were met to the criteria suggested by this study, but sixty sites were not met to the criteria. However, some of the sixty sites also included the obscure sites that their addresses were not apparent to find them.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2000년도 창립총회 및 춘계학술발표회
• /
• pp.125-128
• /
• 2000

Recently, development of advanced soil monitoring technology has became essential for effective site remediation. Soil gas evaluation is simple and powerful technology which can reduce the environmental impact during the survey of VOC contaminated area. In this research, the feasibility test of SnO$_2$ceramic gas sensor is conducted to improve soil gas measurement technology. As a result, it is successfully proved that this gas sensor has an possibility for soil gas monitoring.

• Smart Structures and Systems
• /
• 제9권5호
• /
• pp.393-410
• /
• 2012

Conventional geotechnical instrumentation techniques available for monitoring of slopes, especially soil-nailed slopes have limitations such as electromagnetic interference, low accuracy, poor longterm reliability and difficulty in mounting a series of strain sensors on a soil nail bar with a small-diameter. This paper presents a slope monitoring system based on fibre Bragg grating (FBG) sensing technology. This monitoring system is designed to perform long-term monitoring of slope movements, strains along soil nails, and other slope reinforcement elements. All these FBG sensors are fabricated and calibrated in laboratory and a trial of this monitoring system has been successfully conducted on a roadside slope in Hong Kong. As part of the slope stability improvement works, soil nails and a toe support soldier-pile wall were constructed. During the slope works, more than 100 FBG sensors were installed on a soil nail, a soldier pile, and an in- place inclinometer. The paper presents the layout and arrangement of the instruments as well as the installation procedures adopted. Monitoring data have been collected since March 2008. This trial has demonstrated the great potential of the optical fibre monitoring system for long-term monitoring of slope performance. The advantages of the slope monitoring system and experience gained in the field implementation are also discussed in the paper.

• 한국농공학회논문집
• /
• 제49권1호
• /
• pp.67-76
• /
• 2007

Bioventing is commonly used for petroleum hydrocarbon (PHC) spills. This process provides better subsurface oxygenation, thus stimulating degradation by indigenous microorganisms. Therefore soil vapor monitoring points (VMPs) are extremely important in determining the potential effectiveness of bioventing and in long-term monitoring of bioventing progress. In this study in-situ soil gas monitoring well (GMW) was developed and presented the pilot test results which recover the contaminated site by bioventing method. The result of application was successful and it was expected that GMW developed could be applied to the evaluation procedure of bioventing effectiveness and long-term remediation potential.

• 농업과학연구
• /
• 제46권1호
• /
• pp.57-65
• /
• 2019

The purpose of this study was to develop an environment field monitoring system to measure crop growth. The environment field monitoring system consisted of sensors, a data acquisition system, and GPS. The sensors used in the environment field monitoring system consisted of an ambient sensor, a soil sensor, and an intensity sensor. The temperature and humidity of the atmosphere were measured with the ambient sensor. The temperature, humidity, and EC of the soil were measured with the soil sensor. The data acquisition system was developed using the Arduino controller. The field monitoring data were collected before a rainy day, on a rainy day, and after the rainy day. The measured data using the environment field monitoring system were compared with the Daejeon regional meteorological office data. The correlation between the data from the environment field monitoring system and the data from the Daejeon regional meteorological office was analyzed for performance evaluation. The correlation of the temperature and humidity of the atmosphere was analyzed because the Daejeon regional meteorological office only provided data for the temperature and humidity of the atmosphere. The correlation coefficients were 0.86 and 0.90, respectively. The result showed a good correlation between the data from the environment field monitoring system and the data from the Daejeon regional meteorological office. Therefore, the developed system could be applied to monitoring the field environment of agricultural crops.

• Journal of Biosystems Engineering
• /
• 제43권4호
• /
• pp.426-439
• /
• 2018

Purpose: To continuously monitor soil and climatic properties, a data acquisition system (DAQ) was developed and tested in plum farms (Gyewol-ri and Haechang-ri, Suncheon, Korea). Methods: The DAQ consisted of a Raspberry-Pi processor, a modem, and an ADC board with multiple sensors (soil moisture content (SEN0193), soil temperature (DS18B20), climatic temperature and humidity (DHT22), and rainfall gauge (TR-525M)). In the laboratory, various tests were conducted to calibrate SEN0193 at different soil moistures, soil temperatures, depths, and bulk densities. For performance comparison of the SEN0193 sensor, two commercial moisture sensors (SMS-BTA and WT-1000B) were tested in the field. The collected field data in Raspberry-Pi were transmitted and stored on a web server database through a commercial communications wireless network. Results: In laboratory tests, it was found that the SEN0193 sensor voltage reading increased significantly with an increase in soil bulk density. A linear calibration equation was developed between voltage and soil moisture content depending on the farm soil bulk density. In field tests, the SEN0193 sensor showed linearity (R = 0.76 and 0.73) between output voltage and moisture content; however, the other two sensors showed no linearity, indicating that site-specific calibration is important for accurate sensing. In the long-term monitoring results, it was observed that the measured climate temperature was almost the same as website information. Soil temperature information was higher than the values measured by DS18B20 during spring and summer. However, the local rainfall measured using TR 525M was significantly different from the values on the website. Conclusion: Based on the test results obtained using the developed monitoring system, it is thought that the measurement of various parameters using one device would be helpful in monitoring plum growth. Field data from the local farm monitoring system can be coupled with website information from the weather station and used more efficiently.

• Smart Structures and Systems
• /
• 제17권2호
• /
• pp.297-311
• /
• 2016

Based on the distributed fiber optic sensing (DFOS) technique, plastic optical fibers (POFs) are attractive candidates to measure deformations of geotechnical structures because they can withstand large strains before rupture. Understanding the mechanical interaction between an embedded POF and the surrounding soil or rock is a necessary step towards establishing an effective POF-based sensing system for geotechnical monitoring. This paper describes a first attempt to evaluate the feasibility of POF-based soil deformation monitoring considering the POF-soil interfacial properties. A series of pullout tests were performed under various confining pressures (CPs) on a jacketed polymethyl methacrylate (PMMA) POF embedded in soil specimens. The test results were interpreted using a fiber-soil interaction model, and were compared with previous test data of silica optical fibers (SOFs). The results showed that the range of CP in this study did not induce plastic deformation of the POF; therefore, the POF-soil and the SOF-soil interfaces had similar behavior. CP was found to play an important role in controlling the fiber-soil interfacial bond and the fiber measurement range. Moreover, an expression was formulated to determine whether a POF would undergo plastic deformation when measuring soil deformation. The plasticity of POF may influence the reliability of measurements, especially for monitored geo-structures whose deformation would alternately increase and decrease. Taken together, these results indicate that in terms of the interfacial parameters studied here the POF is feasible for monitoring soil deformation as long as the plastic deformation issue is carefully addressed.