• Journal of Biosystems Engineering
• /
• v.25 no.1
• /
• pp.1-10
• /
• 2000

This study was conducted to develop the mathmatical model for predicting the side thrust which is generated by the shearing action on the vertical surfaces of the sides of the track. Experiments were conducted with the three different shear plates with grouser length of 1, 3 and 5 cm for two different soil condition using soil bin system. The measured side thrust were compared with the values predicted by the new model developed in this study and by Bekker's model respectively. The values of side thrust predicted by the new model were more close to the measured values than those of the side thrust predicted by Bekker's model . The total thrust measured were also compared with the values predicted by the conventional model which considers only bottom thrust effect and by the new model which contains not only bottom thurst but side thrust effect. The values of the thrust predicted by conventional modelwere lower than measured values for both of the soil conditions and the three levels of grouser length. The maximum errors of conventional model were increased with the increase of grouser length. but the values of the total thrust predicted by the model developed in this study were well matched to the measured ones for both of the soil conditions and the three levels of grouser lengths.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11b
• /
• pp.109-116
• /
• 2000

The objective of this study is to measure rim surface adhesion and to calculate motion resistance produced by the adhesion acting on the rim section of a circular wheel under sticky soil condition. The mechanisms of generating motion resistance by the adhesion on a circular wheel were analyzed through wheel motion. Experiments were conducted in an indoor soil bin that contains loam soil. A circular steel wheel was used for experiments. A part of the wheel rim was cut off, and transducers which can measure normal and tangential forces were installed in this section. Calculated motion resistance at a part of the rim section was superposed for one wheel rotation as motion resistance produced by the rim surface adhesion. The motion resistance increased with increasing the dynamic load. Ratio of the motion resistance to total motion resistance measured by an axis transducer was about 23 to 46 % in this study.

• Journal of Ocean Engineering and Technology
• /
• v.20 no.4 s.71
• /
• pp.37-42
• /
• 2006

This paper is concerned with experimental investigation of steering performance of a tracked vehicle on extremely soft soil. A tracked vehicle model with principal dimensions of 0.9 m(L)x0.75 m(B)x0.4 m(H) and weight of 167 kg was constructed with a pair of driving chain links, driven by two AC-servo motors. The tracks were configured with detachable grousers with variable span. A deep seabed was simulated by means of a bentonite-water mixture in a soil bin of 6.0 m(L)x3.7 m(B)x0.7 m(H). The turning radii of vehicle and driving torques of motors were measured with respect to experiment variables: steering ratio, driving speed, grouser chevron angle, grouser span, and grouser height. L8 orthogonal table is adopted for DOE (Design of experiment). The effects of experiment variables on steering performance are evaluated.

• Journal of Biosystems Engineering
• /
• v.35 no.6
• /
• pp.387-392
• /
• 2010

This study was performed to design and to construct a digital soil cone index(CI) measuring device replacing conventional analog type devices. The device developed in the study consisted of a load cell, a rotary encoder and a motor with a decelerator as its main parts. The cone speed was controlled lower than 3.0 m/s which keeps the standard suggested by the ASABE S313.3 specification. The experiment was conducted in a soil bin system as well as in various fields. The CI data measured by the developed device were compared with those by an existing measurement device(SC900, Spectrum, USA). Based on the experiments at various field conditions, the CI measuring characteristic of the device was quite similar to that of the conventional device within a acceptable $R^2$ range of more than 0.5(mean=0.76). It was concluded that the digital cone index measuring device was an effective and comprehensive sensor for measuring soil strength.

• Journal of Forest and Environmental Science
• /
• v.35 no.1
• /
• pp.25-30
• /
• 2019

The composition of artificial soil in a containerized seedling production plays an important role in seedling quality as well as environmental issues. We investigated the effects of different types of biomaterials and mixed ratio with artificial soil on the growth of Fraxinus rhynchophylla seedlings. Soil medium was supplemented with 3 levels (0%, 10%, 20%) of pine bark, mushroom sawdust and rice husk. Root collar diameter (RCD), height growth, and biomass have significantly increased when rice husk was applied. Compared with the control, RCD and height growth showed highest in 20% rice husk treatment with an increase of 5.7% and 17.6%, respectively. In contrast, the treatments of pine bark and mushroom sawdust showed lower results in growth parameters (RCD, height growth, and total biomass) than control. Seedling quality index was also highest at the 20% rice husk treatment, but there was not statistically different among treatments. Our results suggested rice husk can be substituted up to 20% of substrates for containerized F. rhynchophylla seedling production system.

• Korean Journal of Agricultural Science
• /
• v.5 no.2
• /
• pp.127-135
• /
• 1978

For improvement and new design of tillage equipments, indoor test is very useful and more desirable than outdoor because the experiment of outdoor is very difficult and its cost is expensive. This study was carried out to determine the physical properties of artificial soil suitable for the indoor test with the soil bin manufactured at the workshop of the Dept. of Agricultural Machinery Engineering. The artificial soil being studied was made with very similarity to the natural soil of the experimental plots of Chungnam National University, and it consist of 39.35 percent, by weight of bentonite and 48.10 percent of sand with 12.55 percent of SAE 10W oil. The results are summarized as follows: 1. Bulk density increased with increasing number of rolling, and its relationship could be expressed. $y=1.073200+0.070780x-0.002263x^2$ where, y=bulk density ($g/cm^3$), x=number of rolling. These results could be explained that the effect of rolling velocity on the bulk density was not singnificant in the range of 4.5~10.4 em/sec. 2. The absolute soil hardness depended directly upon number of rolling, and their relationship could be expressed by the equation. $y=37.74(0.64 +0.17x-0.0054x^2)/(3.36-0.17x-0.0054x^2)^3$. where, y=absolute soil hardness($kg/cm^3$), x=number of rolling. 3. Relationship between the bulk density and absolute soil hardness could be expressed by the equation; $y=37.74(2.46x-2.02)/(6.02-2.46x)^3$. where, y=absolute soil hardness, x=bulk density. 4. The cohesion and the angle of internal friction of artificial soil were increased with increasing its bulk density. According to the cohesion and angle of internal friction, at the range of 1.60~1.75 ($g/cm^3$) of bulk density, this artificial soil was similar with sandy loam of 29.5% moisture content of natural soil. 5. Sliding-fricfion coefficient of steel plate on the artificial soil was 0.3~0.4 and rubber plate on it is 0.64~0.72. Those values were very similar with those of natural soil being studies by many others.

• Journal of Coastal Disaster Prevention
• /
• v.5 no.4
• /
• pp.163-172
• /
• 2018

To propose the design technique and the execution manual of the LWFS(Lightweight Foamed Soil) method using dredged soil, the operation system for the test-bed integrated management, and to establish an amendment for the domestic quantity per unit and specifications, and a strategy for its internationalization. In order to utilize the dredged soil from the coastal area as a construction material, we constructed the embankment with LWFS on soft ground and monitored its behavior. As a result, it can be expected that the use of LWFS as an embankment material on the soft ground can improve the economic efficiency by reducing the depth and period of soil improvement as well as the uses of nearby dredged soil. To verify the utilization of the dredged soil as a material for light-weighted roadbed, soft ground and foundation ground, and surface processing, perform an experimental construction for practical structures and analyze the behavior. It is expected to be able to improve the soft ground with dredged soil and develop technique codes and manuals of the dredged soil reclamation by constructing a test-bed in the same size of the fields, and establish the criteria and manual of effective dredged soil reclamation for practical use. The application technology of the dredged soil reclamation during harbor constructions and dredged soil reclamation constructions can be reflected during the working design stage. By using the materials immediately that occur from the reclamation during harbor and background land developments, the development time will decrease and an increase of economic feasibility will happen. It is expected to be able to apply the improved soil at dredged soil reclamation, harbor and shore protection construction, dredged soil purification projects etc. Future-work for develop the design criteria and guideline for the technology of field application of dredged soil reclamation is that review the proposed test-bed sites, consult with the institutions relevant with the test-bed, establish the space planning of the test-bed, licensing from the institutions relevant with the test-bed, select a test-bed for the dredged soil disposal area.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.19 no.2
• /
• pp.41-54
• /
• 2016

The production of high quality seedlings is a very important phase in silvicultural systems for successful reforestation or restoration. The purpose of this study was to measure both growth performances and nutrient responses of Fraxinus rhynchophylla and Pinus densiflora seedlings, which are commercially planted in Korea, according to soil improvement treatments. We applied 8 types of soil improvements: control with no treatment, compost B and compost Y as organic materials, vermiculite, perlite, two level of zeolite, and mix of vermiculite, perlite, and zeolite as inorganic materials in a permanent national nursery. Only compost B treatment significantly increased soil pH, organic matter, total nitrogen, available phosphorus, exchangeable potassium and calcium at the 0-10 cm soil depth. The growth of F. rhynchophylla and P. densiflora was the highest at the compost B treatment and the lowest at the vermiculate treatment. Compost B treatment allocated more carbon to aboveground than belowground by 39%, especially to foliage. On the vector diagnosis, there was 'shortage' on compost B treatment because of all increases of N contents, N concentrations, and growth and 'over accumulation' on vermiculite treatment because of more N uptake compared with dry weight increase. This study suggested optimal use of soil improvements is very important to improve soil quality in a permanently used nursery.

• The Plant Pathology Journal
• /
• v.37 no.6
• /
• pp.521-532
• /
• 2021

Knowledge and better understanding of functions of the microbial community are pivotal for crop management. This study was conducted to study bacterial structures including Acidovorax species community structures and diversity from the watermelon cultivated soils in different regions of South Korea. In this study, soil samples were collected from watermelon cultivation areas from various places of South Korea and microbiome analysis was performed to analyze bacterial communities including Acidovorax species community. Next generation sequencing (NGS) was performed by extracting genomic DNA from 92 soil samples from 8 different provinces using a fast genomic DNA extraction kit. NGS data analysis results revealed that, total, 39,367 operational taxonomic unit (OTU), were obtained. NGS data results revealed that, most dominant phylum in all the soil samples was Proteobacteria (37.3%). In addition, most abundant genus was Acidobacterium (1.8%) in all the samples. In order to analyze species diversity among the collected soil samples, OTUs, community diversity, and Shannon index were measured. Shannon (9.297) and inverse Simpson (0.996) were found to have the highest diversity scores in the greenhouse soil sample of Gyeonggi-do province (GG4). Results from NGS sequencing suggest that, most of the soil samples consists of similar trend of bacterial community and diversity. Environmental factors play a key role in shaping the bacterial community and diversity. In order to address this statement, further correlation analysis between soil physical and chemical parameters with dominant bacterial community will be carried out to observe their interactions.

• Korean Journal of Agricultural Science
• /
• v.50 no.2
• /
• pp.181-192
• /
• 2023

Appropriate fertilization methods are required according to species to supply necessary nutrients to plants and prevent soil environmental contamination in nurseries. In this study, the effects of nitrogen and phosphorus fertilization on the growth of Liriodendron tulipifera and soil characteristics were investigated. After 16 fertilization treatments (4 levels of nitrogen × 4 levels of phosphorus) were applied to one-year-old L. tulipifera seedlings at the Yongmun Nursery Station of the Korea Forest Service, height, root collar diameter (RCD), biomass, leaf nutrients, and soil characteristics were investigated. The height increased as the amount of nitrogen and phosphorus fertilization increased, and the RCD was the highest in the ×2 treatment. Biomass growth was on average 40.0% higher for the treatment with high nitrogen fertilization compared to the low nitrogen treatment. The seedling quality index was the highest with nitrogen and phosphorus ×2 treatment. Leaf phosphorus and magnesium concentrations decreased when nitrogen fertilization was applied, and leaf potassium concentrations decreased as nitrogen fertilization increased. Soil pH and exchangeable potassium decreased as the amount of phosphorus application increased, and exchangeable magnesium decreased as the amount of nitrogen application increased and increased as the amount of phosphorus application increased. Considering the growth of L. tulipifera seedlings and changes in the soil characteristics at the nursery stage, twice the standard fertilization amount is the appropriate fertilization amount for nursery of the Yongmun Nursery Station. It is expected that this study will contribute to improving nursery soil fertilization management technology for healthy seedling production.