• 한국식물병리학회:학술대회논문집
• /
• 한국식물병리학회 2003년도 정기총회 및 추계학술발표회
• /
• pp.105.1-105
• /
• 2003

The Plant growth Promoting rhizobacteria (PGPR), Pseudomonas sp. (A3) and Bacillus sp. (AT33) were isolated from the rhizosphere of Amaranthus blitum collected from soil contaminated with chromium. Both bacterial strains quantitatively reduced hexavalent chromium to trivalent chromium. Pseudomonas sp. broughter greater conversion of Cr6+ in the medium (100％) as compared to Bacillus sp.(62％). Phaseolus mungo seeds inoculated with Pseudomonas sp. or Bacillus sp. were grown under different concentration of chromium. The monitored parameters included elongation of shoot and root, fresh weight, dry weight and concentration of chromium in the shoot and root systems. As compared to non inoculated seedlings those inoculated with A3 and AT33 exhibited better growth.

• Journal of Ginseng Research
• /
• 제44권4호
• /
• pp.627-636
• /
• 2020

Background: Cultivation of medicinal crops, which synthesize hundreds of substances for curative functions, was focused on the synthesis of secondary metabolites rather than biomass accumulation. Nutrition is an important restrict factor for plant growth and secondary metabolites, but little attention has been given to the plasticity of nutrient uptake and secondary metabolites synthesis response to soil nitrogen (N) change. Methods: Two year-field experiments of Sanqi (Panax notoginseng), which can synthesize a high level of saponin in cells, were conducted to study the effects of N application on the temporal dynamics of biomass, nutrient absorption, root architecture and the relationships between these parameters and saponin synthesis. Results: Increasing N fertilizer rates could improve the dry matter yields and nutrient absorption ability through increasing the maximum daily growth (or nutrient uptake) rate. Under suitable N level (225 kg/ha N), Sanqi restricted the root length and surface and enhanced the root diameter and N uptake rate per root length (NURI) to promote nutrient absorption, but the opposite status of Sanqi root architecture and NURI was found when soil N was deficient. Furthermore, increasing N rates could promote the accumulation of saponin in roots through improving the NURI, which showed a significant positive relationship with the content of saponin in the taproots. Conclusion: Appropriate N fertilizer rates could optimize both root architecture and nutrient uptake efficiency, then promote both the accumulation of dry matter and the synthesis of saponins.

• Journal of Forest and Environmental Science
• /
• 제35권1호
• /
• pp.25-30
• /
• 2019

The composition of artificial soil in a containerized seedling production plays an important role in seedling quality as well as environmental issues. We investigated the effects of different types of biomaterials and mixed ratio with artificial soil on the growth of Fraxinus rhynchophylla seedlings. Soil medium was supplemented with 3 levels (0%, 10%, 20%) of pine bark, mushroom sawdust and rice husk. Root collar diameter (RCD), height growth, and biomass have significantly increased when rice husk was applied. Compared with the control, RCD and height growth showed highest in 20% rice husk treatment with an increase of 5.7% and 17.6%, respectively. In contrast, the treatments of pine bark and mushroom sawdust showed lower results in growth parameters (RCD, height growth, and total biomass) than control. Seedling quality index was also highest at the 20% rice husk treatment, but there was not statistically different among treatments. Our results suggested rice husk can be substituted up to 20% of substrates for containerized F. rhynchophylla seedling production system.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 추계학술발표회
• /
• pp.213-216
• /
• 2003

Efforts for better understanding of the interaction between groundwater recharge and thermal regime of the subsurface medium is gaining momentum for its diverse applications in water resources. A numerical model is developed to simulate temperature variations of the subsurface under time varying groundwater recharge. The model utilizes MacCormack scheme for finite difference approximation of the partial differential equation describing the conductive and advective heat transport. For the estimation of recharge rate, optimization of the model is realized by searching for the unknown parameters which minimize the root-mean-square error between simulated and measured temperatures. Simulation results for 22-year time series data of temperature measurements reveal that the proposed model can accurately simulate subsurface temperature variations resulting from the redistribution of the heat due to the movement of water and it can also estimate temporal variations of recharge. Seasonal variations of recharge and a linear relationship between precipitation and recharge are clearly reflected in the simulated results.

• 한국토양비료학회지
• /
• 제49권3호
• /
• pp.235-241
• /
• 2016

The soil does not only serve as a medium for plant growth but also for engineering construction purposes. It is very weak in tension, very strong in compression and fails only by shearing. The behaviour of the soil under any form of loading and the interactions of the earth materials during and after any engineering construction work has a major influence on the success, economy and the safety of the work. Soils and their management have therefore become a broad social concern. A limitless variety of soil materials are encountered in both agronomy and engineering problems, varying from hard, dense, large pieces of rock through gravel, sand, silt and clay to organic deposits of soft compressible peat. All these materials may occur over a range of physical properties, such as water contents, texture, bulk density and strength of soils. Therefore, to deal properly with soils and soil materials in any case requires knowledge and understanding of these physical properties. The desired value of bulk density varies with the degree of stability required in construction. Bulk density is also used as an indicator of problems of root penetration,soil aeration and also water infiltration. This property is also used in foundation engineering problems. While not conforming to standard test procedures, this work attempts to add to the basic information on such important soil parameters as water content, bulk density.

• Journal of Applied Biological Chemistry
• /
• 제43권1호
• /
• pp.25-30
• /
• 2000

The main form of nitrogen fertilizer applied to lowland rice is urea, but little is known about its transport in waterlogged soil. This study was conducted to investigate the transport of urea in waterlogged soil column using WAVE (simulation of the substances Water and Agrochemicals in the soil, crop and Vadose Environment) model which includes the parameters for urea adsorption and hydrolysis, The adsorption distribution coefficient and hydrolysis rate of urea were measured by batch experiments. A transport experiment was carried out with the soil column which was pre-incubated for 45 days under flooded condition. The urea hydrolysis rate (k) was $0.073h^{-1}$. Only 5% of the applied urea remained in soil column at 4 days after urea application. The distribution coefficient ($K_d$) of urea calculated from adsorption isotherm was $0.21Lkg^{-1}$, so it was assumed that urea that urea was a weak-adsorbing material. The maximum concentration of urea was appeared at the convective water front because transport of mobile and weak-adsorbing chemicals, such as urea, is dependent on water convective flow. The urea moved down to 11 cm depth only for 2 days after application, so there is a possibility that unhydrolyzed urea could move out of the root zone and not be available for crops. A simulated urea concentration distribution in waterlogged soil column using WAVE model was slightly different from the measured concentration distribution. This difference resulted from the same hydrolysis rate applied to all soil depths and overestimated hydrodynamic dispersion coefficient. In spite of these limitations, the transport of urea in waterlogged soil column could be predict with WAVE model using urea hydrolysis rate (k) and distribution coefficient ($K_d$) which could be measured easily from a batch experiment.

• 한국환경생태학회지
• /
• 제20권4호
• /
• pp.425-435
• /
• 2006

본 연구에서는 암석비탈면 등에서 주요 녹화식물로 많이 이용되고 있는 등나무를 대상으로 황폐지 토양조건에서 인위적으로 함수율을 조절하여 등나무의 내건성과 토양수분조건에 따른 생장특성을 시험하였는 바, 그 결과를 요약하면 다음과 같다. 1. 등나무 묘목은 토양함수율 5% 수준에서 수분 스트레스를 받아 고사하였고, 토양함수율 10% 수준에서는 전 생장기간 동안 생장률에 큰 변화가 없었다. 따라서 본 시험토양에서 토양함수율 5% 수준이 등나무 모목의 위조함수율이며, 토양함수율 10% 수준이 생장에 대한 임계토양수분 범위로서, 등나무는 내건성이 있는 것으로 확인되었다. 2. 묘목의 신장생장, 직경생장, 엽생장, 총 건물생산량 등의 주요 생장요소들을 기준으로 분석한 결과등나무 묘목의 생장은 전반적으로 토양함수율이 높을수록 양호하였으며, 이들 각 생장요소들(Y)은 토양함수율(W)에 대해 Y=a+bW+cW2의 곡선형을 나타내었다. 3. 토양함수율 20 % 이상에서는 생장기간이 길어질수록 묘목 생장량이 뚜렷이 증가하였으며, 각 토양함수율 수준에서 묘목 생장량(Y)은 생장기간(D)에 대해 Y=a+bD+cD2의 곡선형을 나타내었다. 4. 토양함수율 20% 이상에서는 동일한 수분조건에서 근류균 접종구는 대조구에 비해 총 건물생산량을 기준으로 하면 평균 30%의 생장촉진효과가 있었다. 5. 근류균은 토양함수율이 높을수록 접종이 용이하고 근류의 형성량도 많았다.

• 한국농공학회논문집
• /
• 제51권1호
• /
• pp.1-9
• /
• 2009

The objective of this paper was to evaluate the auto-calibration with multi-objective optimization method to calibrate the parameters of the Soil and Water Assessment Tool (SWAT) model. The model was calibrated and validated by using nine years (1996-2004) of measured data for the 384-ha Baran reservoir subwatershed located in central Korea. Multi-objective optimization was performed for sixteen parameters related to runoff. The parameters were modified by the replacement or addition of an absolute change. The root mean square error (RMSE), relative mean absolute error (RMAE), Nash-Sutcliffe efficiency index (EI), determination coefficient ($R^2$) were used to evaluate the results of calibration and validation. The statistics of RMSE, RMAE, EI, and $R^2$ were 4.66 mm/day, 0.53 mm/day 0.86, and 0.89 for the calibration period and 3.98 mm/day, 0.51 mm/day, 0.83, and 0.84 for the validation period respectively. The statistical parameters indicated that the model provided a reasonable estimation of the runoff at the study watershed. This result was illustrated with a multi-objective optimization for the flow at an observation site within the Baran reservoir watershed.

• Geomechanics and Engineering
• /
• 제33권1호
• /
• pp.1-9
• /
• 2023

The unconfined compression strength (UCS) of soils is commonly used either before or during the construction of geo-structures. In the pre-design stage, UCS as a mechanical property is obtained through a laboratory test that requires cumbersome procedures and high costs from in-situ sampling and sample preparation. As an alternative way, the empirical model established from limited testing cases is used to economically estimate the UCS. However, many parameters affecting the 1D soil compression response hinder employing the traditional statistical analysis. In this study, gene expression programming (GEP) is adopted to develop a prediction model of UCS with common affecting soil properties. A total of 79 undisturbed soil samples are collected, of which 54 samples are utilized for the generation of a predictive model and 25 samples are used to validate the proposed model. Experimental studies are conducted to measure the unconfined compression strength and basic soil index properties. A performance assessment of the prediction model is carried out using statistical checks including the correlation coefficient (R), the root mean square error (RMSE), the mean absolute error (MAE), the relatively squared error (RSE), and external criteria checks. The prediction model has achieved excellent accuracy with values of R, RMSE, MAE, and RSE of 0.98, 10.01, 7.94, and 0.03, respectively for the training data and 0.92, 19.82, 14.56, and 0.15, respectively for the testing data. From the sensitivity analysis and parametric study, the liquid limit and fine content are found to be the most sensitive parameters whereas the sand content is the least critical parameter.

• 한국작물학회지
• /
• 제48권5호
• /
• pp.361-368
• /
• 2003

The responses of five varieties and three cultivars of pea (Pisum sativum) to Rhizobium inoculation on nodulation, growth, nitrogenase activity, dry matter production and N uptake were investigated. The pea varieties were IPSA Motorshuti-l, IPSA Motorshuti-2, IPSA Motorshuti-3, BARI Motorshuti-l, BARI Motorshuti-2 and the cultivars were 063, Local small and Local white. Fifty percent seeds of each pea variety/cultivar were inoculated with a mixture of Rhizobium inoculants at rate of 15g/kg seed and the remaining fifty percent seeds were kept uninoculated. The plants inoculated with Rhizobium inoculant significantly increased nodulation, growth, nitrogenase activity, dry matter production and N uptake. Among the varieties/cultivars, BARI Motorshuti-l performed best in almost all parameters including nitrogenase activity of root nodule bacteria of the crop. There were positive correlations among the number and dry weight of nodules (r=$0.987^{**}$, $0.909^{**}$), nitrogenase activity of root nodule bacteria (r=$0.944^{**}$, $0.882^{**}$), dry weight of shoot (r=$0.787^{**}$, $0.952^{**}$), N content (r=$0.594^{**}$, $0.605^{**}$) and N uptake (r=$0.784^{**}$, $0.922^{**}$) by shoot both at flowering and pod filling stages of the crop, respectively. It was concluded that BARI Motorshuti-l in symbiotic association with Rhizobium inoculant performed best in recording nitrogenase activity, dry matter production and N uptake by pea.