• Journal of Internet Computing and Services
• /
• v.8 no.5
• /
• pp.59-66
• /
• 2007

In korea, TIT(Transport Information Technology) based IP-TV services have been provided in Saemaeul trains and some sections of subway trains, But the software systems for the service performed in alternated fashions and suffered from many problems such as suspension, memory leaking and overflow, These problems increased playback loss time and resulted in bad reliabilities, In this paper, a software TIT monitor is designed and implemented for Monitoring module and Reset module in physically poor environments, The designed system formalized monitoring time intervals for effective monitoring, Through the real experiments, playback time is improved in 7.2% comparing to existing system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.3
• /
• pp.410-415
• /
• 2002

This paper describes the implementation of a SoC(System-on-a-Chip) and an ISDN communication terminal by the SoC in ISDN network. The SoC has been developed with the functions of 32-bit ARM7TDMI RISC core processor, network connection with S/T interface, TDM--bus interface and voice codec, user interface. And we also review the developed software structure and the ISDN service protocol procedures which are working on the SoC. And finally this paper describers a structure of an ISDN terminal equipment using the implemented SoC and terminal software.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.1
• /
• pp.60-66
• /
• 2009

A service network in the future ubiquitous environment can consist of a variety of elements, which include different protocols of the network transport. Interwoking different transport protocols can alleviate such problems occurred in accessing network as poverty of facilities, faults, and contention in a path of particular protocol communication. This paper schemes to improve performance of the network constituted of different protocols for the network transport. Interposing an interwork element, like SDR (Software Defined Radio), in the network can raise availability of transport paths, and then improve transport performance of the overall network Simulation analysis justifies such a scheme and this paper presents simulation results.

• The KIPS Transactions:PartD
• /
• v.10D no.5
• /
• pp.745-752
• /
• 2003

The component-based development methodology becomes famous as the reuse technology for independence and productivity of software development It is necessary component metrics for component-based systems, because It should be measurable to improve the quality of the software. Hence, in this paper, we propose component cohesion and coupling metrics which is reflected in characteristics of component. The operation use value is calculated by the information of classes interface commonly uses to offer the component's service. And, the operation similarity value is calculated by the operations use value. Component cohesion and coupling is calculated by the operation similarity and based of the information which is extracted in the analysis phase. And, we examine the necessity of component metrics in comparison with object-oriented metrics.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.12 s.189
• /
• pp.95-102
• /
• 2006

A product is designed through the collaboration among engineers in several fields such as design, analysis, and manufacturing. These series of functions are performed repeatedly during the design process. An easy access and exchange of the model data is one of the important elements that help to shorten production development time. Especially, the importance of data exchange between CAD and CAE applications is increasing in the field of verification and estimation of the products. However, information and knowledge of model which is generated by a CAD software cannot be transferred by a function of CAE software, as an exchange of product data between CAD and CAE applications. It causes a delay in design analysis and eventually discourages a designer's effort in improving his design. Therefore, we need to integrate a commercial CAD and CAE applications effectively and to use the same interface on a product model obtained in a distributed environment. This paper shows how to implement a model exchange between CAD and CAE by a web-service and how to provide a communication environment among engineers.

• Proceedings of the Korea Contents Association Conference
• /
• 2015.05a
• /
• pp.15-16
• /
• 2015

Measuring sensor, equipment, ICT facilities and their software have relatively short life time comparing to constructional structure so that we should exchange or fix them continuously in the process of maintenance and management. In this paper, we propose a novel design of integrated maintenance, management, and measuring monitoring system applying the concept of mobile cloud. For the sake of disaster prevention for constructional structures such as bridge, tunnel, and other traditional buildings in the village of local heritage, we analyze status of these structures in the long term or short term period as well as disaster situations. Collecting data based on mobile cloud and analyzing future expectations based on probabilistic and statistical techniques, we implement our integrated monitoring system for constructional structures to solve these existing problems. Final results of this design and implementation are basically applied to the monitoring system for more than 10,000 structures spread over national land in Korea. In addition, we can specifically apply the monitoring system presented here to a bridge of timber structure in Asan Oeam Village and a traditional house in Andong Hahoe Village to watch them from possible disasters. Total procedure of system design and implementation as well as development of the platform LinkSaaS and application services of monitoring functions implemented on the platform. We prove a good performance of our system by fulfilling TTA authentication test, web accommodation test, and operation test using real measuring data.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.5
• /
• pp.650-662
• /
• 1993

The thesis describes the realization and test of the transport layer operating on the CLNS (Connection Less Network Service) which is specified by ISO 8073 and ADDENDUM 2 protocol. For realization of the transport layer, five modules and interface primitives were definde. This protocol was formally described by SDL (Specification and Description Language) and was programmed in C-language. For verification of the software, protocol tester was implemented and test scenarios were defined. The verification was accomplished based on the test scenarios. Transport Layer software presented in this thesis may be utilized in a real situation with some modifications. Protocol tester presented in this thesis can also be used for verification of other protocol softwares.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.7 no.1
• /
• pp.171-192
• /
• 1994

End-user Computing(EUC) is one of the significant developments of the 1980s with the explosive supply of personal computers and application software related to it. EUC can be defined as the direct assumption of system development and data processing tasks by the user of the service for his own direct benefit. This is in contrast to the traditional approach to computing in which user requirement are identified and defined and then turned over to professional system designers and programmers for implementation, with the end-user a relatively passive participant in the process. The traditional approach to system development has two obvious drawbacks. First, there is the problem that something may be lost in translation of the problem as originally formulated by the requestor and as it is implemented by the computer specialists. Second, there is the problem that it can take a longtime as growth of significant workloads within system department staff. EUC is an attempt to compensate for this drawbacks associated with the traditional system department process. It permits the end-user to interact directly with an information system, utilizing user friendly software support tools. End-user Searching(EUS) can be defined as accessing online databases and performing search operations for the purpose of finding information to be used by that same person rather than another, in contract with intermediary searcher. The concept of EUS is related to the concept of EUS. That is, two concept are similarly to development background, effects and functions. Therefore, as EUC bring on a change the traditional data processing environment, EUS also bring on a change the traditional intermediary search environment.

• International Journal of Internet, Broadcasting and Communication
• /
• v.8 no.1
• /
• pp.33-41
• /
• 2016

Big data management is becoming an increasingly important issue in both industry and academia of information science community today. One of the important categories of big data generated from software systems is log data. Log data is generally used for better services in various service providers and can also be used to improve system reliability. In this paper, we propose a novel big data management architecture specialized for log data. The proposed architecture provides a scalable log management system that consists of client and server side modules for efficient handling of log data. To support large and simultaneous log data from multiple clients, we adopt the Hadoop infrastructure in the server-side file system for storing and managing log data efficiently. We implement the proposed architecture to support various client environments and validate the efficiency through measurement studies. The results show that the proposed architecture performs better than the existing logging architecture by 42.8% on average. All components of the proposed architecture are implemented based on open source software and the developed prototypes are now publicly available.

• Journal of Internet Computing and Services
• /
• v.8 no.3
• /
• pp.1-7
• /
• 2007

Since the DirectTV started its digital broadcasting services in 1994 for the first time in the U.S., digital broadcasting widened its services in many areas. In korea, TIT(Transport Information Technology) based IP-TV services have been provided in Saemaeul trains and some sections of subway trains. But the software systems for the service performed in alternated fashions and suffered from many problems such as suspension, memory leaking and overflow. These problems increased playback loss time and resulted in bad reliabilities. In this paper, a software TIT monitor is designed and implemented for the TIT system in physically poor environments. The designed system formalized monitoring time intervals for effective monitoring. Through the real experiments, playback time is improved in 14% comparing to existing system.