• Journal of Advanced Navigation Technology
• /
• v.12 no.6
• /
• pp.574-582
• /
• 2008

This paper shows the research about the development of software receiver processing Galileo E1B signal. it is introduced the structure of Galileo receiving software using sampled IF data as a program input. And the performance of SDR(Software Defined Radio) embodied using MATLAB tool is analyzed. Embodied SDR is modulated according to their roll and function.

• Journal of Positioning, Navigation, and Timing
• /
• v.3 no.4
• /
• pp.163-170
• /
• 2014

A pseudolite is used as a GPS backup system, and is also used for the purpose of indoor navigation and correction information transmission. It is installed on the ground, and transmits signals that are similar to those of a GPS satellite. In addition, in recent years, studies on the improvement of positioning accuracy using the pseudorange measurement of a pseudolite have been performed. As for the effect of the time synchronization error between a pseudolite and a GPS satellite, a time synchronization error of 1 us generally induces a pseudorange error of 300 m; and to achieve meter-level positioning, ns-level time synchronization between a pseudolite and a GPS satellite is required. Therefore, for the operation of a pseudolite, a time synchronization algorithm between a GPS satellite and a pseudolite is essential. In this study, for the time synchronization of a pseudolite, "a pseudolite time synchronization method using the time source of UTC (KRIS)" and "a time synchronization method using a GPS timing receiver" were introduced; and the time synchronization performance depending on the pseudolite time source and reference time source was evaluated by designing a software-based pseudolite time synchronization performance evaluation simulation platform.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.10
• /
• pp.979-984
• /
• 2010

The users who use a combined GPS/Galileo receiver will benefit from an improved availability of the combined system and a reduced dependence on one particular positioning system. However, these users must solve the problem of an offset between the time scales of GPS and Galileo (GGTO). GGTO must be analyzed for not only a navigation system but also a timing system requesting precise time service. This paper analyzes the interoperability problem in a combined GPS/Galileo timing receiver and estimates the timing performance under various assumptions. The GPS real measurements were collected by using the commercial timing receiver from Ashtech Ltd. and the Galileo measurements were generated by a simulation software. A suitable test scenario set-up and the performance in a point of timing stability was evaluated.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.5
• /
• pp.865-872
• /
• 2020

In the fifth generation (5G) mobile networks, non-orthogonal multiple access (: NOMA) has been considered as a promising technology, to increase the channel capacity. In NOMA, the multiple users share the channel resources and multiplex simultaneously. Recently, for the stronger channel user, it was reported that the bit-error rate (: BER) performance with interactive mobile users is degraded, compared to the BER of non-interactive users. In this paper, in order to improve such degraded BER performance, we propose the maximum-likelihood (: ML) receiver. First, the closed-form expression for the BER of the ML receiver is derived, and then it is shown that the BER of the ML receiver is improved, compared with the BER of the ideal perfect successive interference cancellation (: SIC) receiver. Additionally, based on the analytical expression, Monte Carlo simulations validates the above-mentioned results.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.12
• /
• pp.155-160
• /
• 2003

Owing to the advances in ADC and DSP technologies, signals in If band, which once had to be processed in analog technology, can new be digitally processed. This is referred to as "Digital IF" or "Digital Radio", which is a preliminary stage of SDR. Applying the digital radio technology to a multi-carrier receiver design, a processing gain is generated through an over-sampling of input data. In the digital receiver, decimation is performed for reducing the computational complexity CIC and half band filter is used together with the decimation as an anti-alising filter. The CIC filter, however, should introduce the roll-off phenomenon in the passband, which causes the receiving performance to be considerably degraded due to the distorted Passband flatness of receiving filter. In this paper, we designed a CIC roll-off compensation filter for W-CDMA digital receiver. The performance of the proposed compensation filter is confirmed through computer simulations in such a way that the BER is minimized by compensating the roll-off characteristics.off characteristics.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.6
• /
• pp.1003-1010
• /
• 2020

This paper investigates the achievable data rate for the single-user decoding(SUD) receiver, which does not perform successive interference cancellation(SIC), in contrast to the conventional SIC non-orthogonal multiple access(NOMA) scheme. First, the closed-form expression for the achievable data rate of SUD NOMA with correlated information sources(CIS) is derived, for the stronger channel user. Then it is shown that for the stronger channel user, the achievable data rate of SUD NOMA with independent information sources(IIS) is generally inferior to that of conventional SIC NOMA with IIS. However, for especially highly CIS, we show that the achievable data rate of SUD NOMA is greatly superior to that of conventional SIC NOMA. In addition, to verify the impact of CIS on the achievable data rate of SUD, the extensive comparisons of the achievable data rates for the SUD receiver and the SIC receiver are compared for various correlation coefficients.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.409-409
• /
• 2000

In this paper, the implementation of a tightly coupled real-time GPS/INS integrated system is discussed. The hardware is developed for any GPS receiver and any IMU. The navigation software is modularized by tasks, so that can be easily modified when the integrated system is restructured. A van test was performed to show the feasibility of the proposed system.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.90-90
• /
• 2000

The FAS protocol of FOUNDATION Fieldbus playes the roles of interface between Data Link Layer and application layer and establishment of connection between receiver and sender. In this study, the FAS protocol of FOUNDATION Fieldbus was developed. The method of implementation is described in this paper. Software of FAS protocol was implemented by Window-based program and DOS-based program for PC and sensor module, respectively.

• ETRI Journal
• /
• v.26 no.6
• /
• pp.555-559
• /
• 2004

We propose an efficient digital IF down converter architecture for dual-mode WCDMA/cdma2000 based on the concept of software defined radio. Multi-rate digital filters and fractional frequency conversion techniques are adopted to implement the front end of a dual-mode receiver for WCDMA and cdma2000. A sub-sampled digital IF stage was proposed to support both WCDMA and cdma2000 while lowering the sampling frequency. Use of a CIC filter and ISOP filter combined with proper arrangement of multi-rate filters and common filter blocks resulted in optimized hardware implementation of the front end block in 292k logic gates.

• Proceedings of the KIEE Conference
• /
• 2008.04a
• /
• pp.65-66
• /
• 2008

A vector DLL represents signal tracking scheme utilizing navigation results, and it has been known that it has better performance than a conventional scalar DLL. This paper discusses the structure and conceptual benefits of the vector DLL, and describes implementation of the vector DLL in a software GPS receive. Also, the benefits of the vector DLL are confirmed by an experiment. Through the experiment, the code tracking accuracy between the vector DLL and a scalar DLL implementation is compared in static environments, and the navigation accuracy is analyzed using GPS signals received from a commercial GPS simulator.