• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1660-1662
• /
• 2005

When an underground pipeline runs parallel with DC traction systems, it suffers from DC traction interference. Because the train is fed by the substation through the overhead wire and return current back to the substation via the rails. If these return rails are poorly insulated from earth, DC current leak into the earth and can be picked up by nearby pipeline. It may bring about large-scale accidents even in cathodically protected systems. In this paper we analyze the anode location of distributed impressed current cathodic protection systems for the mitigation of DC traction interference on buried pipelines using the simulation software CatPro. We can get a fix on the anode location.

• Journal of Information Processing Systems
• /
• 제15권1호
• /
• pp.189-202
• /
• 2019

During thermal power coal-fired boiler operation, it is very important to detect the pulverized coal concentration in the air pipeline for the boiler combustion stability and economic security. Because the current measurement methods used by power plants are often involved with large measurement errors and unable to monitor the pulverized coal concentration in real-time, a new method is needed. In this paper, a new method based on microwave circular waveguide is presented. High Frequency Electromagnetic Simulation (HFSS) software was used to construct a simulation model for measuring pulverized coal concentration in power plant pipeline. Theoretical analysis and simulation experiments were done to find the effective microwave emission frequency, installation angle, the type of antenna probe, antenna installation distance and other important parameters. Finally, field experiment in Jilin Thermal Power Plant proved that with selected parameters, the measuring device accurately reflected the changes in the concentration of pulverized coal.

• 한국자동차공학회논문집
• /
• 제12권2호
• /
• pp.109-116
• /
• 2004

Bent-axis piston pump have been commonly used in hydraulic systems because of high pressure level, best efficiency, low shear force on pistons and low operating costs. The other side, they have a few demerits like that they have the relatively high number of moving parts and more discharge pressure ripples. Especially, the discharge pressure ripples bring about vibrations and noises in hydraulic system components such as connecting pipes and control valves, so that these deteriorate the stability and accuracy of the systems. Therefore, the hydraulic systems having the bent-axis piston pump require the methods to reduce the discharge pressure ripples. So, the purpose of this paper is to reduce the discharge pressure ripples by the phase interference of pressure wave and to develope the analysis model of the pumps to predict the discharge pressure ripples. In this paper, the analysis model of the bent-axis piston pump was developed using the AMESim software, and the reliability of that was verified by the comparison with the experimental results. The hydraulic pipeline with a parallel line was used as the method to generate the phase interference of pressure wave. the dynamics characteristics of the hydraulic pipeline with a parallel line were analyzed by a transfer matrix method. the usefulness of the phase interference of pressure wave was investigated through the experiment and simulation. The results from the experiment and simulation said that the phase interference of pressure wave by the hydraulic pipeline with a parallel line could reduce the discharge pressure wave of the pump well. The analysis model of the bent-axis piston pump developed in this paper and the method of the phase interference by the hydraulic pipeline with a parallel line are expected to be helpful to achieve the design of the pump and to reduce the discharge pressure wave of the pump effectively.

• 한국가스학회지
• /
• 제6권1호
• /
• pp.81-85
• /
• 2002

탱크와 연결된 배관에서 원하지 않은 사고로 인해 액체 위험물질의 누출이 발생할 경우 천이영역에서의 누출속도 계산방법을 제시하였다. 배관에서의 액누출에 관한 누출속도는 층류와 난류영역에서 Crowl and Louvar 등이 제시한 모델식을 이용하여 프로그램 또는 직접계산에 의해 이루어지고 있으나, 천이영역에 대한 모델식은 없었다. 따라서 본 논문에서는 Lap-Mou Tam 등이 실험한 천이영역에서 레이놀즈수에 따른 마찰계수 실험값을 이용하여 천이영역에 대한 누출속도 값을 계산하였고 이 값을 층류와 난류에 관한 모델식을 사용한 값과의 비교를 통해 천이영역에서 일반적으로 사용할 수 있는 모델식으로 난류에 관한 모델식으로 계산한 값에 안전율 $30\%$를 추가한 값을 위험평가에 사용할 수 있음을 보였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2022년도 춘계학술대회
• /
• pp.291-295
• /
• 2022

본 논문은 시민들의 Life Style 변화에 대응하고 송산그린시티의 미래상을 달성하기 위해 기술과 주거, 산업, 관광레저 등 기능이 상호 효율적으로 융합된 환경친화적 첨단도시를 건설하기 위하여 스마트도시에 적용한 u-상수도 관로파손감지시스템 구축기술에 대하여 기술하기로 한다. 관로파손감지시스템은 송산그린시티 동측지구내 상수도관 상부에 설치되는 스마트예방시트, 관로파손감지기, 관파손감지 소프트웨어, 서버 등으로 구성되며 중앙제어부(관파손감지소프트웨어, 서버)는 화성시 맑은물사업소내에 설치되어 SKT의 WCDMA방식의 무선통신망을 통하여 현장에서 화성시로 데이터를 전송하고 있다. 본 시스템은 굴착공사중 시설물 파손을 예방하고 관로 손상여부를 실시간으로 감지하여 이벤트 발생위치를 관리자에게 알려주여 누수손실을 예방하여 시설물의 수명연장을 도모한다.

• 정보와 통신
• /
• 제25권12호
• /
• pp.10-18
• /
• 2008

In this paper, we present a low-power design of H.264 codec based on dedicated hardware and software solution on EMP(ETRI Multi-core platform). The dedicated hardware scheme has reducing computation using motion estimation skip and reducing memory access for motion estimation. The design reduces data transfer load to 66% compared to conventional method. The gate count of H.264 encoder and the performance is about 455k and 43Mhz@30fps with D1(720x480) for H.264 encoder. The software solution is with ASIP(Application Specific Instruction Processor) that it is SIMD(Single Instruction Multiple Data), Dual Issue VLIW(Very Long Instruction Word) core, specified register file for SIMD, internal memory and data memory access for memory controller, 6 step pipeline, and 32 bits bus width. Performance and gate count is 400MHz@30fps with CIF(Common Intermediated format) and about 100k per core for H.264 decoder.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.70-73
• /
• 2002

This paper describes the way to embody the grid coverage and the grid coverage processor which can construct pipelines. The pipeline constructed by the developed grid coverages has internal pipelines that have different resolution and it provides the way of access to very large datasets efficiently. Several operations, such as filtering, image enhancement and band operation, are embedded in the developed grid coverage and grid coverage processor COM components. The practical usefulness of the developed grid coverage and grid coverage processor has been proven by applying them in developing an image processing software for very large images.

• 만화애니메이션 연구
• /
• 통권37호
• /
• pp.491-508
• /
• 2014

극장용 3D 애니메이션의 제작이 활발해지면서 3D 애니메이션의 제작 공정은 복잡해지고, 제작 인원도 점차 증가하고 있다. 한정된 예산과 기간 안에 좋은 작품을 제작해야하는 메이저 스튜디오들은 그동안 애니메이션, 리깅, 옷 헤어, 이펙트 등의 분야에서 테크니컬 디렉터를 활용하여 문제점을 해결해왔다. 테크니컬 디렉터는 애니메이션을 3D로 제작하면서 등장한 새로운 직업으로 한정된 작품 제작 기간, 인력, 예산, 제작 공정 등의 문제와 맞물리면서 그 중요성을 더해가고 있다. 이 논문은 연구자의 디즈니 애니메이션과 소니 영화사 테크니컬 디렉터로서의 재직 경험, 업계 전문가들에 대한 자료 조사와 국내외의 관련 문헌들을 분석하여, 디즈니의 극장용 3D 애니메이션에서 테크니컬 디렉터의 역할을 '제작 공정 설계'와 '샷의 문제점 분석'이라는 두 가지 관점에서 분석하였다. 애니메이션 테크니컬디렉터는 제작 공정을 설계하고 테스트하며 제작 과정에서 발생하는 문제점들을 최대한 빠른 시간 내에 발견하여 해결한다. 또한 모델링, 맵핑, 캐릭터 리깅(Character Rigging), 옷, 헤어, 라이팅, 렌더링, 소프트웨어 개발부 등과 관련된 캐릭터나 샷의 다양한 문제점들을 분석하여 아티스트들이 제작 일정에 맞춰 작업을 끝내도록 지원한다. 국내에서도 3D 애니메이션 제작이 활발히 진행되고, 해외 스튜디오와의 공동 제작이 증가하고 있어, 애니메이션의 제작 공정을 개선하고 샷과 캐릭터의 다양한 문제점을 분석하여 제작의 효율성을 향상시키는 애니메이션 테크니컬 디렉터의 양성이 꼭 필요하다.

• Genomics & Informatics
• /
• 제15권3호
• /
• pp.108-111
• /
• 2017

Recently developed computational methods allow the imputation of human leukocyte antigen (HLA) genes using intergenic single nucleotide polymorphism markers. To improve the imputation accuracy in HLA imputation, it is essential to increase the sample size and the diversity of alleles in the reference panel. Our software, MergeReference, helps achieve this goal by providing a streamlined pipeline for combining multiple reference panels into one.

• 한국멀티미디어학회논문지
• /
• 제20권11호
• /
• pp.1803-1810
• /
• 2017

A large amount of processing time is required if the process of detecting the touch position on the touch screen and displaying it on the display panel is performed only by software. In this paper, we propose a method to output information touched on the screen using H/W method in order to improve the response speed delay. In the FPGA module designed for the HDMI signal output to the display module, the touch information is input to the serial data signal including touch coordinate information, point size, and color information. Then the module render the image using HDMI signal input to the module and the touch information. This method has a pipeline structure so it has effect of reducing the delay time that occurs in outputting the touch information compared with the conventional software processing method.