• International Journal of Internet, Broadcasting and Communication
• /
• v.13 no.2
• /
• pp.27-35
• /
• 2021

NAND flash memory-based SSD needs an internal software, Flash Translation Layer(FTL) to provide traditional block device interface to the host because of its physical constraints, such as erase-before-write and large erase block. However, because useful host-side information cannot be delivered to FTL through the narrow block device interface, SSDs suffer from a variety of problems such as increasing garbage collection overhead, large tail-latency, and unpredictable I/O latency. Otherwise, the new type of SSD, open-channel SSD exposes the internal structure of SSD to the host so that underlying NAND flash memory can be managed directly by the host-level FTL. Especially, I/O data classification by using host-side information can achieve the reduction of garbage collection overhead. In this paper, we propose a new scheme to reduce garbage collection overhead of open-channel SSD by separating the journal from other file data for the journaling filesystem. Because journal has different lifespan with other file data, the Write Amplification Factor (WAF) caused by garbage collection can be reduced. The proposed scheme is implemented by modifying the host-level FTL of Linux and evaluated with both Fio and Filebench. According to the experiment results, the proposed scheme improves I/O performance by 46%~50% while reducing the WAF of open-channel SSDs by more than 33% compared to the previous one.

• Nuclear Engineering and Technology
• /
• v.54 no.12
• /
• pp.4751-4758
• /
• 2022

Two-phase flow may almost exist in every branch of the energy industry. For the corresponding engineering design, it is very essential and crucial to monitor flow patterns and their transitions accurately. With the high-speed development and success of deep learning based on convolutional neural network (CNN), the study of flow pattern identification recently almost focused on this methodology. Additionally, the photographing technique has attractive implementation features as well, since it is normally considerably less expensive than other techniques. The development of such a two-phase flow pattern online monitoring system is the objective of this work, which seldom studied before. The ongoing preliminary engineering design (including hardware and software) of the system are introduced. The flow pattern identification method based on CNNs and transfer learning was discussed in detail. Several potential CNN candidates such as ALexNet, VggNet16 and ResNets were introduced and compared with each other based on a flow pattern dataset. According to the results, ResNet50 is the most promising CNN network for the system owing to its high precision, fast classification and strong robustness. This work can be a reference for the online monitoring system design in the energy system.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2021.07a
• /
• pp.401-403
• /
• 2021

본 연구는 한국지능정보사회진흥원에서 제공한 2018년 스마트폰 과의존 실태조사에서 사용된 11개 변수와 스마트폰 과의존과의 관계를 탐색하고, 이를 통해 딥러닝 기반 스마트폰 과의존 분류 분석 모델을 개발하고자 시행되었다. 학습데이터셋은 전국 10,000개 가구내 만 3-69세 스마트폰 이용자 25,465명의 스마트폰 이용 형태 및 개인적 특성에 관한 데이터이다. 딥러닝은 심층신경망(DNN)을 설계하였으며, 은닉층(hidden layer)은 4개층으로 구성하였다. 입력한 데이터는 각각 200개, 150개, 100개, 50개, 2개 노드를 거치면서 최종 출력 정보인 스마트폰 과의존 분류율로 나타나는 모델이다. 이때 스마트폰 과의존 분류률을 높이기 위해 학습률(learning rate)과 같은 하이퍼 파라미터를 활용하여 세부조정하면서 가장 잘 학습하는 값을 찾아내었다. 연구결과, 학습횟수가 300번으로 학습율(learning.rate)이 0.01일때 훈련데이터에서 97.43%, 검증데이터에서 98.06%로 가장 높게 나타났다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2020.11a
• /
• pp.1018-1021
• /
• 2020

최근 개인정보가 포함된 비정형 텍스트 문서들이 유출되거나 무분별하게 공개됨으로써 정보의 주체는 물론 기업들까지 피해를 받고 있다. 데이터를 공개 및 활용하기 위해 개인정보 검출 및 비식별화 과정이 필수적이지만 정형 데이터와는 달리 비정형 데이터의 경우 해당 과정을 자동으로 처리하는 데 한계가 있다. 이를 위해 딥러닝 모델들을 사용하여 자동화하려는 연구들이 있었지만 문장 내 단어의 모호성에 대한 고려 없이 단어 개체명 정보에만 의존하여 개인정보를 검출하는 형태로 진행되었다. 따라서 문장 내 단어들 중 식별 대상인 단어들도 비식별화 되어 데이터에 대한 유용성을 저해할 수 있다는 문제점을 남겼다. 본 논문에서는 문장의 의도 정보를 단어의 개체명 학습 과정에 부가적인 정보로 활용하는 개인정보 검출 모델과 개인정보 데이터의 유용성을 고려한 비식별화 기법을 제안한다.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.289-293
• /
• 2015

The construction industry has been evolving with the development of information technology. According to this trend, the current industry changes from 2d drawings to Building Information Modeling(BIM). Current studies on the BIM-based estimation have problems such as Quantity Take-Off(QTO) specificity toward a particular software, the uncertainty of the amount in accordance with the model quality. These studies focus on QTO based on BIM rather than schematic estimation. In addition, studies on the connection with the QTO and unit cost for schematic estimation are insufficient. The purpose of this study is to propose schematic estimation process by utilizing construction codes and QTO in architectural object BIM libraries. Construction codes are classified in detail in order to input codes inside each. This study has connected unit cost and construction classification codes that obtain from BIM model. The results of this study will be helpful in decision-making and communication for schematic estimation of the design phase. It will improve the efficiency and reliability problems of existing schematic estimation.

• Korean Journal of Artificial Intelligence
• /
• v.11 no.4
• /
• pp.21-27
• /
• 2023

This paper discusses a deep learning-based road surface analysis system that collects data by installing vibration sensors on the 4-axis wheel bearings of a vehicle, analyzes the data, and appropriately classifies the characteristics of the current driving road surface for use in the vehicle's control system. The data used for road surface analysis is real-time large-capacity data, with 48K samples per second, and the A2B protocol, which is used for large-capacity real-time data communication in modern vehicles, was used to collect the data. CAN and CAN-FD commonly used in vehicle communication, are unable to perform real-time road surface analysis due to bandwidth limitations. By using A2B communication, data was collected at a maximum bandwidth for real-time analysis, requiring a minimum of 24K samples/sec for evaluation. Based on the data collected for real-time analysis, performance was assessed using deep learning models such as LSTM, GRU, and RNN. The results showed similar road surface classification performance across all models. It was also observed that the quality of data used during the training process had an impact on the performance of each model.

• Advances in nano research
• /
• v.16 no.6
• /
• pp.531-548
• /
• 2024

The study focuses on using remote sensing to gather data about the Earth's surface, particularly in urban environments, using satellites and aircraft-mounted sensors. It aims to develop a classification framework for road targets using multi-spectral imagery. By integrating Convolutional Neural Networks (CNNs) with XGBoost, the study seeks to enhance the accuracy and efficiency of road target identification, aiding urban infrastructure management and transportation planning. A novel aspect of the research is the incorporation of quantum sensors, which improve the resolution and sensitivity of the data. The model achieved high predictive accuracy with an MSE of 0.025, R-squared of 0.85, RMSE of 0.158, and MAE of 0.12. The CNN model showed excellent performance in road detection with 92% accuracy, 88% precision, 90% recall, and an f1-score of 89%. These results demonstrate the model's robustness and applicability in real-world urban planning scenarios, further enhanced by data augmentation and early stopping techniques.

• The KIPS Transactions:PartD
• /
• v.11D no.1
• /
• pp.133-142
• /
• 2004

The next generation of web applications will need to be larger, more complex, and flexible Agent-oriented systems have great potential for these e-commerce applications. Agents can dynamically discover and compose e-services and mediate interactions. Development of software agents with CBD (Component Based Development) has proved to be successful in increasing speed to market of development Projects, lowering the development cost and providing better qualify. In this thesis, we propose a systemic development process for software agents using component and UML (Unified Modeling Language). We suggest a etA (e-business Agent) CBD reference architecture for layer the related components through identification and classification of general agent and e-business agent. We also propose the ebA-CBD process that is a guideline to consider the best features of existing agent oriented software engineering methodologies, while grounding agent-oriented concepts in the same underlying semantic framework used by UML. We first developed the agent components specification and modeled it with Goal, Role, Interaction, and Architecture Model. Based on this, we developed e-CPIMAS (e-Commerce Product Information Mailing Agent System) as a case study that provides the product information's mailing service according to proposed process formality. We finally describe how these concepts may assist in increasing the efficiency reusability, productivity and quality to develop the business application and e-business agent.

• Archives of design research
• /
• v.18 no.2 s.60
• /
• pp.219-232
• /
• 2005

Moderns are living within flood of web contents, animation, reflex data etc. as well as sight, product, environment design. There fore, modern consumer has much options. Designer must provide various result for consumer for this reason. And must invent new sensitivity and propose to consumer. As purpose of this MCC sensitivity palette research takes advantage of the most sensitive color, do. Because applying correct sensitivity more than when design with matter already settled, rid private prejudice, and is thing to convey design intention exactly to user. Excellent culture contents must be able to equip international color design sensitivity. MCC sensitivity palette research studies and carries on the head emotion and sensitivity language that is nationality first, and collect End arranged sensitivity adjective through data analysis and picture data analysis that is the next time research leader Munheonjeok. And distributed collected adjective equally, and arrange distributed adjective by field of each sensitivity and collect system. Do 3 colors, 4 colors color scheme in selected sensitivity adjective and completed Simheom version. Result of beta version research to color specialist and designer last digital palette through question and inquiry compose. Through this process, completed more real and correct digital color sensitivity palette. Completed color scheme is operated in www.mcdri.net on web, and also programs to windows base and developed to software. MCC color scheme palette that research result is made includes sensitivity data database. This database can use directly in industry and continuous development is available. Software can search color scheme in language and idea development through classification search that use 3 attributes of color is available there is cough data of each output device different color error.

• The Korean Journal of Archival Studies
• /
• no.43
• /
• pp.5-42
• /
• 2015

Korean wave 3.0 is focused on 'K-Culture' which includes traditional culture, cultural art as well as existing culture contents as a keyword. It considers everything about Korean culture as materials of Korean wave culture contents. Since Korean wave culture contents reflect contemporary social aspect, it needs to preserve those contents as archives and records which have the important value of evidence. With this social environment, this study aims to implement RMS based on AtoM that manages various kinds of Korean wave culture contents through analysis of management situation of those materials. Recently, it is in progress individually to manage them through organizations dealing with korean cultures such as K-Pop, K-Food, K-Movie. However, it has problems in accumulating information and reproducing high quality contents because of lack of coordination among organizations. To solve the problems, this study proposed RMS based on open source software Access to Memory(AtoM) for managing and recording Korean wave culture contents. AtoM provides various functions for managing records and archives such as accumulation, classification, description and browsing. Furthermore AtoM is for free as open source software and easy to implement and use. Thus, this study implemented RMS based on AtoM to methodically manage korean wave culture contents by functional requirements of RMS. Also, this study considered contents relating K-Food as an object to collect, classify, and describe. To describe it, this study selected ISAD(G) standard.