• KSTLE International Journal
• /
• 제3권2호
• /
• pp.101-109
• /
• 2002

This paper presents the fabrication and performance inspection of a peristaltic micropump by flow simulation. The valve-less micropump using the diffuser/nozzle is consists of base plate, mid plate, top plate and connection tubes fur inlet and outlet. In detail, the base plate is composed of two diffuser nozzles and three chambers, the mid plate consists of a glass diaphragm for the volumetric change of the pumping chamber. The inlet and outlet tubes are connected at the top plate and the actuator fur pressing the diaphragm is located beneath the top plate. The micropump is fabricated on the silicon wafer by DRIE (Deep Reactive ion Etching) process. The pumping performances are tested by the pneumatic test rig and compared with the simulated results fur various dimensions of diffuser nozzles. The pumping characteristics of the micropump by the volumetric change at the pumping chamber is modeled and simulated by the commercial software of FLOW-3D. The simulated results shows that reverse flow is the inherent phenomena in the diffuser nozzle type micropump, but it can be reduced at the dual pumping chamber model.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.303-306
• /
• 2003

To reduce the storage space of spent fuels used at the atomic power plants all over the world, the uranium elements contained in the spent fuels is being extracted and effectively stored. For this, the spent fuel are oxidized and deoxidized. In this study, it is produced conceptual design specification about the spent fuel management technology research and test facilities have been produced. The first considered processes in the facilities is the metal conversion furnace in the dry environment. Since this process is operates at the high temperature range, we have to consider heat-resisting designs for the device. For the heat-resisting designs, we have surveyed and analyzed technical references for material properties. Also, we have determined the temperature distribution condition of the device based on experimental results. We have calculated thermal stress and strain of each devices by the commercial analysis software, I-DEAS. By using the results, we have analyzed design configurations of the point at issue by thermal effects, and suggested alternative design configurations. It is experimented for inspecting confidence rate of heat strain. Based on these results, necessary design specifications for heat-resisting design have been produced.

• 정보처리학회논문지A
• /
• 제11A권3호
• /
• pp.109-114
• /
• 2004

최근 무선 랜의 확산과 블루투스 등의 개인 무선 통신의 발전으로 네트워크 환경은 점차 유무선 구분 없이 쉽게 네트워크에 접속할 수 있도록 변화되고 있다. 또한, 가정 내의 노트북, PDA 등의 네트워크 군기의 증가는 초고속 인터넷 라인을 공유하여 이용하고 기기 간에 네트워크를 구성해 작업하는 환경을 필요로 한다. 본 논문에서는 유무선 네트워크에 구분 없이 손쉽게 연결할 수 있고 인터넷에 접속할 수 있는 다중 네트워크 인터페이스를 지원하는 유무선 통합 액세스 포인트를 개발하여 기능을 시험하고 성능을 검증하였다. 각기 다른 네트워크간의 통합을 이루고 성능을 보장하기 위한 시스템 하드웨어 설계, 개발 단계부터 프로토콜 소프트웨어 개발까지 실질적 개발내용을 기술하고, 다양한 형태의 기기를 통한 네트워크 접속 시험을 통해 연동 및 성능에 대한 결과를 보였다.

• 한국콘텐츠학회논문지
• /
• 제9권5호
• /
• pp.33-39
• /
• 2009

컴퓨터와 개인 휴대 단말장치 사용의 대중화와 함께 이들 장치들을 이용한 개인정보 혹은 사업상 중요 데이터를 처리하고 저장하는 행위도 따라 증가하게 되었다. 따라서 이들 장치로부터 사용자의 허락 없이 중요 데이터가 자신의 장치로부터 빠져나가는 행위가 일어나서는 안 된다. 본 논문에서는 중요 파일과 관련된 파일 오픈 시스템 콜을 호출하는 프로세스를 일정시간 추적하여 네트워킹 인터페이스를 통해 이들 중요 데이터가 빠져 나가는 것을 방지하는 간단한 방법을 제시하였다. 제안된 방법은 기존 인증 혹은 암호화를 이용한 방법과 비교해 해킹 기술 발전과 하드웨어 및 소프트웨어의 새로운 취약점 발견과 무관하게 안정적으로 동작하는 이점이 있다. 특히, 본 논문에서는 리눅스 환경의 사용자와 커널 영역에서 제안된 알고리즘을 직접 구현하여 타당성을 검증하였다.

• 산업기술연구
• /
• 제24권A호
• /
• pp.239-250
• /
• 2004

Numerical analysis were performed to investigate the stability and internal movement of tunnel located beneath the base of abutment of bridge according to the method of supporting tunnel. Two supporting methods of the multi-staged grouting method with steel pipes and the large diameter of pipe supporting method were used in the centrifuge model tests. The slip form of model lining, specially built to simulate the process of tunnel excavating under the condition of accelerated g-level, was used in the centrifuge model tests. Four centrifuge model tests were performed, changing the supporting methods of the multi-staged grouting method with steel pipes and the large diameter of pipe supporting method and the location of model abutment base of bridge. For internal displacement of tunnel, movements of the crown. The left and the right sides of spring line were measured during the proceeds of excavating tunnel in centrifuge model tests. Test results were compared with numerically estimated values of internal displacement of tunnel by using the commercially available FEM software of PENTAGON-3D. It was found that they were in good agreements and the large diameter of pipe supporting method was more stable than the multi-staged grouting method with steel pipes with respect to the internal movement of tunnel.

• 한국포장학회지
• /
• 제16권1호
• /
• pp.9-18
• /
• 2010

For screening test of the non-volatile compounds which migrate from food packaging materials into foodstuffs, the traditional high performance liquid chromatography (HPLC) systems suffer from the lack of universal detector with high sensitivity and universality and high efficiency HPLC separation column which provides complete separation of complex mixtures into all individual substances. In this work, the use possibility of online two-dimensional liquid chromatography (2D-LC) system coupled with a charged aerosol detector (CAD), a universal detector, was reviewed. 2D-LC system permits to improve peak capacity and resolving power for complex mixtures. Charged aerosol detector (CAD) offers a new feasibility for detection of any non-volatile compounds with high sensitivity and constant response factor in a calibration range. The combination of size exclusion chromatography (SEC) and normal phase HPLC (NP-HPLC) is most frequently used for the separation of the natural and synthetic polymers which are mainly used as raw materials for the manufacture of food packaging materials. However, there is no commercial software available for data acquisition and handling and therefore the quantification in 2D-LC analysis is still rare.

• Transactions on Electrical and Electronic Materials
• /
• 제18권5호
• /
• pp.279-286
• /
• 2017

In this paper, an optimal approach for the wide-area regulation of control devices in a transmission network is proposed. In order to realize an improved voltage profile and reduced power loss, existing devices such as tap-changing transformers, synchronous machines, and capacitor banks should be controlled in a coordinated and on-line manner. It is well-understood that phasor measurement units in transmission substations allow the system operators to access the on-line loading and operation status of the network. Accordingly, this study proposes efficient software applications that can be employed in area operation centers. Thus, the implanted control devices can be regulated in an on-line and wide-area coordinated approach. In this process, efficient objective functions are devised for both voltage profile improvement and power loss reduction. Subsequently, sensitivity analysis is carried out to determine the best weighting factors for these objectives. Extensive numerical studies are conducted on an IEEE 14-bus test system and a real-world system named the Azarbayjan Regional Transmission Network. The obtained results are discussed in detail to highlight the promising improvements.

• 한국게임학회 논문지
• /
• 제11권1호
• /
• pp.37-46
• /
• 2011

고성능 피처폰과 스마트폰이 등장함에 따라 모바일 게임의 규모와 개발 인원이 급속도로 증가하고 있다. 이런 이유들로 인해 모바일 게임의 개발 프로세스는 변하고 있다. 효율적인 프로그램 개발을 위한 툴은 전 세계적으로 개발되었지만, 이벤트 연출을 위한 툴에 대한 연구는 미비한 상태이다. 이벤트 연출에서 기획자는 프로그래머보다 더 중요한 역할을 한다. 본 논문에서는 기획자를 위한 모바일 게임 이벤트 연출 툴을 개발하고 개발된 툴의 효용성과 유용성을 테스트하기 위해 상용화 모바일 게임들의 이벤트를 작성하였다. 그 결과 개발 기간이 15%정도 단축되었다.

• 대한기계학회논문집A
• /
• 제31권8호
• /
• pp.855-861
• /
• 2007

Haptic rendering is a process providing force feedback during interactions between a user and a virtual object. This paper presents a real-time haptic rendering technique for deformable objects based on visual information of intervention between a tool and a real object in a remote place. A user can feel the artificial reaction force through a haptic device in real-time when a slave system exerts manipulation tasks on a deformable object. The models of the deformable object and the manipulator are created from the captured image obtained with a CCD camera and the recognition of objects is achieved using image processing techniques. The force at a rate of 1 kHz for stable haptic interaction is deduced using extrapolation of forces at a low update rate. The rendering algorithm developed was tested and validated on a test platform consisting of a one-dimensional indentation device and an off-the shelf force feedback device. This software system can be used in a cellular manipulation system providing artificial force feedback to enhance a success rate of operations.

• 정보처리학회논문지D
• /
• 제12D권7호
• /
• pp.985-992
• /
• 2005

OLAP 시스템은 사용자가 다양한 측면에서 대화식으로 정보를 분석할 수 있는 의사결정 지원 시스템이다. 기존의 컴포넌트를 이용한 CBD 방법론을 OLAP 시스템 구축에 직접 적용하는 것은 정형화된 컴포넌트로 인해 유연성과 재활용성 측면에서 한계를 가진다. 본 연구에서는 이러한 한계를 극복하기 위해 비즈니스 요구사항과 개발 컴포넌트를 포함하도록 확장한 템플릿의 개념을 CBD 방법론에 도입하였다. 이러한 템플릿에 기초하여 OLAP 시스템을 보다 쉽게 개발하고 재활용성을 높일 수 있는 템플릿 기반 CBD 방법론(TCBD)을 제안하였다. 템플릿 기반 방법론은 이미 생성된 템플릿에 가변적 객체를 변경하여 비즈니스 요구사항을 반영하도록 하였다. 제안 방법론을 OLAP 시스템의 실제 구축에 적용하여 제안된 TCBD 방법론이 유연성과 재활용성 측면에서 효율적이고, 테스팅과 디버깅 단계를 포함한 개발 기간을 단축할 수 있음을 보인다