• Journal of the Korean Graphic Arts Communication Society
• /
• v.25 no.2
• /
• pp.15-28
• /
• 2007

For the color offset printing, it starts with input of data. The past days, drum scanner or flat scanner used to input of data, but now it changes gradually into using of digital camera because digital camera become popular. The high quality digital camera saves as a data(RAW format), sRGB which have built in digital camera, or Adobe RGB format. sRGB of ICC(International Color Consortium) profile is a standard color gamut of digital camera. Distribution of color gamut in sRGB is less than Adobe RGB have a distribution in ICC profile. sRGB also can not be expressed in some specific part, because distribution of color gamut in sRGB is not able to cover all parts in ICC Profile of international standards CMYK. It is more popular to use Adobe RGB than sRGB to do high quality offset printing and software basis color setting in Europe and Japan. In spite of this data basis, there is a difficulty of doing color correction between the color proofing prints and the final prints. To see how the software color setting effects to RGB data, this thesis will use Gretag Macbeth ColorChecker 24 patch which has the most general natural color chart to compare sRGB and Adobe RGB to check the differences of color changes. It will use the several factors that came out from the process of making ICC Profile to figure out the optimum In-house profile. It also compares the differences of using matt paper and glossy paper to do best quality color proof offset printing, and how the Rendering Intent effects the proof print.

• Journal of Information Technology Services
• /
• v.5 no.1
• /
• pp.177-190
• /
• 2006

Since their first inception a few decades ago, software components have received much attention mainly due to their alleged benefits of quality and productivity improvement. Despite this, it is yet to be agreed upon what and how components should be designed. This paper aims to bridge the gap by proposing a collaborative process where the voice of the customer is captured and documented by employing the event and entity models. These requirement elements (WHAT) are cross-tabulated in three relation matrices in accordance with the weights provided by the business users. The requirements are fed into the algorithm invented by the authors to optimize the component grouping (HOW). This collaborative process has been successfully validated at an enterprise wide software development project. The process was effective to help the users more actively involved in the design of the system and made the whole process faster and more adaptive to the changes.

• Annual Conference of KIPS
• /
• 2019.05a
• /
• pp.86-88
• /
• 2019

In a complex geographical environment, communication quality of communication equipment is being seriously challenged. Secondary Users(SUs) must make the best possible use the idle spectrums that Primary Users(PUs) do not use and change spectrum frequently. Using the relevance vector machine(RVM) to establish a signal noise Ratio(SNR) Model for interference information and bit error rate(BER). Through the model and real-time interference information, the minimum channel SNR meeting the BER requirements of communication equipment can be predicted, and we can also calculate the minimum transmitted power. According to the simulation results, this method has better performance for selecting available channel and restraining interference.

• Quality Improvement in Health Care
• /
• v.24 no.1
• /
• pp.9-22
• /
• 2018

Purpose: The purpose of this study is to develop the Korean root cause analysis (RCA) software that can be used to systematically investigate underlying causes for preventing or reducing recurrence of patient safety incidents. Methods: We reviewed the existing guidelines and literatures on the RCA in order to figure out the RCA process. Also we examined the existing RCA softwares for investigating patient safety incidents to design the contents and interface of the RCA software. Based on the results of reviewing literatures and softwares, we developed a draft version of the Korean RCA software that can be easily used in Korean hospital settings by RCA teams. Results: The Korean RCA software consisted of several modules, which are modules for identifying patient safety incidents, organizing RCA team, collecting and analysing data, determining contributory factors and root causes, developing the action plans, and guiding evaluation. Conclusion: The Korean RCA software included optimized RCA process and structured logic for cause analysis. Thus even beginners in RCA are expected to easily use this software for investigating patient safety incidents. As software has been developed with the public financial support, it will be distributed free of charge. We hope that it will contribute to facilitating patient safety improvement activities in Korea.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.4
• /
• pp.273-280
• /
• 2008

This paper is thing for a quantitive quality evaluation in national Defense Human Resource Management Information S/W system development. Apply a quantitive quality evaluation way to be based on an international standard to admonish at ISO/IEC 9126. Proposed 6 basis of count, and set up sub 27 items detailed functionality, reliability, use anger, efficiency, maintenance anger, a transplant result, and inspection of quality table wrote the Matrix measured S/W quality to a chart. Studied a quantitive evaluation plan of a Defense Human Resource Management Information S/W system to see weight by the priority order that reflected a characteristic of a national defense business to a Purpose of a subject user, and Presented. It is 80% in quantitive quality evaluation application satisfied under 8, Very Satisfied 7(87.5%) Satisfied 1(12.5%) of Defense Human Resource Managers and judgment worked as marked so that satisfaction of reliability and a user regarding functionality was high and there will be contribute to an elevation of defense capabilities as analyze efficient national defense S/W use and effect.

• International Journal of Computer Science & Network Security
• /
• v.22 no.3
• /
• pp.77-88
• /
• 2022

In response to the significant COVID-19 outbreak, countries have enforced the use of E-learning systems as an alternative to traditional learning; to contain the virus and minimize the infection rate while maintaining the continuity of the learning experience. However, the effective adoption of E-learning systems requires a well-understanding of critical factors, especially in times of crisis. In this regard, this study intends to assess the success of the E-learning system adoption by Higher Education Institutions (HEIs) during the crisis of COVID-19 by utilizing the Information Systems Success (ISS) model. This study's adopted model consists of nine interdependent dimensions, namely: Technical System Quality, Information Quality, Service Quality, Learner Quality, Perceived Satisfaction, Perceived Usefulness, System Use, Intention to Use, and System Success. An electronic survey was distributed among higher education students from different universities in Saudi Arabia to explore each model's dimension. Structural Equation Modeling (SEM) has been applied via SmartPLS software to test the causal relationships between dimensions. This study's main results revealed that students' Service Quality, Learner Quality, and the Intention to Use by students are essential drives for E-learning System Use during the Covid-19 pandemic. Meanwhile, the Intention to Use the system is significantly influenced by Perceived Satisfaction and Perceived Usefulness dimensions. Further, Perceived Satisfaction, Perceived Usefulness, and System Use are interdependent, and all three have a significant positive impact on E-learning System Success.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.3 s.96
• /
• pp.53-61
• /
• 1999

STL has several errors such as orientation error, hole error, and acute triangle error on being translated from CAD software. These errors should be corrected before using in Rapid Prototyping. So the software is necessary to correct errors. In this study, STL Editor which is a system for STL error correction and shape modification is developed and contains following characteristics. 1.Apply the triangle based data st겨cture. 2.Use the graphic user interface for easy work. 3.Use the Diet method to reduce data size. 4.Use the Delaunay triangulation method to enhance the quality of STL. 5.Modify the STL errors manually.

• Journal of Korean society of Dental Hygiene
• /
• v.24 no.2
• /
• pp.141-148
• /
• 2024

Objectives: The purpose of this study was to investigate the effect of denture use on the quality of life of cancer patients aged ≥40 years. Methods: Data from the National Health and Nutrition Examination Survey (2013-2018) were used in this study. A total of 302 individuals were selected as the final study participants. Data were analyzed using the chi-square test and logistic regression analysis using SPSS software. Results: The quality of life in the group with dentures was lower than that in the group without dentures. Conclusions: The use of dentures had a significant effect on the quality of life of cancer patients aged ≥40 years. Therefore, national dental care guidelines and policies should be developed to prevent an increase in tooth loss in patients with cancer.

• Journal of Korea Multimedia Society
• /
• v.8 no.6
• /
• pp.807-813
• /
• 2005

The production and authoring of digital multimedia contents are most important fields in multimedia technology. Nowadays web-based technology and related multimedia software technology are growing in the IT industry and these technologies are evolving most rapidly in our life. The technology of digital audio and video processing is utilizing rapidly to improve quality of our life, Also we are more interested in high sense and artistic feeling in the music and entertainment areas by use of three dimensional (3D) digital sound technology continuously as well as 3D digital video technology. The service field of digital audio contents is increasing rapidly through the Internet. And the society of Internet users wants the audio contents service with better quality. Recently Internet users are not satisfying the sound quality with 2 channels stereo but seeking the high quality of sound with 5,] channels such as 3D audio of the movie films. But it might be needed proper hardware equipments for the service of 3D sound to satisfy this demand. In this paper, we expand the simple 3D audio generator developed and propose a web-based music bank by the software development of 3D audio generation player in 3D sound environment with two speakers minimizing hardware equipments, Also we believe that this study would contribute greatly to digital 3D sound service of high quality for music and entertainment mania.

• International Journal of Computer Science & Network Security
• /
• v.24 no.5
• /
• pp.33-39
• /
• 2024

In a previous study we proceeded to the remodularization architecture based on classes and packages using the Formal Concept Analysis (FCA)[13] [14] [30]. we then got two possible remodularized architectures and we explored the issue of redistributing classes of a package to other packages, we used an approach based on Oriented Graph to determine the packages that receive the redistributed classes and we evaluated the quality of a remodularized software architecture by metrics [31] [28] [29]. In this paper, we will address the issue of the efficiency of the Oriented Graph in the remodularization of software architectures compared to the Formal Concept Analysis FCA method. The formal method of FCA concept is not popularized among scientists as opposed to the use of the labeled directed graph. It is for this reason that our directed graph approach is more effective in its simplicity and popularity.