• Animal Bioscience
• /
• v.36 no.8
• /
• pp.1156-1166
• /
• 2023

Objective: Pork belly is a cut of meat with high worldwide demand. However, although the belly is comprised of multiple muscles and fat, unlike the loin muscle, research on their genetic parameters has yet to focus on a representative cut. To use swine breeding, it is necessary to estimate heritability against pork belly traits. Moreover, estimating genetic correlations is needed to identify genetic relationship among the traditional carcass and meat quality traits. This study sought to estimate the heritability of the carcass, belly, and their component traits, as well as the genetic correlations among them, to confirm whether these traits can be improved. Methods: A total of 543 Yorkshire pigs (406 castrated males and 137 females) from 49 sires and 244 dam were used in this study. To estimate genetic parameters, a total of 12 traits such as lean meat production ability, meat quality and pork belly traits were chosen. The heritabilities were estimated by using genome-wide efficient mixed model association software. The statistical model was selected so that farm, carcass weight, sex, and slaughter season were fixed effects. In addition, its genetic parameters were calculated via MTG2 software. Results: The heritability estimates for the 7th belly slice along the whole plate and its components were low to moderate (0.07±0.07 to 0.33±0.07). Moreover, the genetic correlations among the carcass and belly traits were moderate to high (0.28±0.20 to 0.99±0.31). Particularly, the rectus abdominis muscle exhibited a high absolute genetic correlation with the belly and meat quality (0.73±52 to 0.93±0.43). Conclusion: A moderate to high correlation coefficient was obtained based on the genetic parameters. The belly could be genetically improved to contain a larger proportion of muscle regardless of lean meat production ability.

• Health Policy and Management
• /
• v.4 no.2
• /
• pp.1-26
• /
• 1994

As the hospital environment is changing rapidly, management is therefore obligated to use new ways to provide better service to patients. For example information system is introduced to some hospitals in Korea. Information system has several benefits such a soperational efficiency by on-line delivery and processing of data, accurate and rapid information production, continuous monitoring of performance and feedback, improvement of work process and better service quality. Still, many hospitals cannot be sure that information system is useful for improving organization performance. Because only one or two area of hospital information system were considered for development and with limited development hospital information system cannot be used effectively. The purpose of this study is to suggest the model of information system utilizaton and to analyze the hospital in formation system in Korea. The results are following; 1. In Korea, proportion of operating system of comuter is 31% of UNIX, 11% of IBM OS and 10% of PC LAN. 2. As we expect, scope of application software and amounts of heardware and software invest ments are affected by concern of CEO. 3. Many CIO(chief information officer) say that the biggest problems are lack of after-service and obsolescence of computer equipments in terms of hardware and shortage of application software for hospital in terms of software. 4. Personnel of information system department is so small that hospital information system can't be improved. 5. During the development of information system, full-time participation of end user is only 20% hospital with almost less than 12 person-month. This study was accomplished by survey through mail questionnaires. Response to the survey was only 55% and it was hard to generalize all the result obtained from this survey. However, We hope that this study would be helpful for helth care organization to acknowlege hospital information system in korea and to design the future architecture and frame of information system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.6
• /
• pp.1973-1993
• /
• 2022

Model-driven engineering (MDE) and aspect-oriented software development (AOSD) contribute to the common goal of development of high-quality code in reduced time. To complement each approach with the benefits of the other, various methods of integration of the two approaches were proposed in the past. Aspect-oriented code generation, which targets obtaining aspect-oriented code directly from aspect models, offers some unique advantages over the other integration approaches. However, the existing aspect-oriented code generation approaches do not comprehensively address all aspects of a model-driven code generation system, such as a textual representation of graphical models, conceptual mapping, and incorporation of behavioral diagrams. These problems limit the worth of generated code, especially in practical use. Here, we propose AJFCode, an approach for aspect-oriented model-driven code generation, which comprehensively addresses the various aspects including the graphical models and their text-based representation, mapping between visual model elements and code, and the behavioral code generation. Experiments are conducted to compare the maintainability and reusability characteristics of the aspect-oriented code generated using the AJFCode with the most comprehensive object-oriented code generation approach. AJFCode performs well in terms of all metrics related to maintainability and reusability of code. However, the most significant improvement is noticed in the separation of concerns, coupling, and cohesion. For instance, AJFCode yields significant improvement in concern diffusion over operations (19 vs 51), coupling between components (0 vs 6), and lack of cohesion in operations (5 vs 9) for one of the experimented concerns.

• Journal of Digital Convergence
• /
• v.15 no.2
• /
• pp.199-206
• /
• 2017

Embedded control system is widely spreaded and used in various fields including military defence, aviation, medical, etc. due to extended use of smart phones, connected car, IoT. Increasing examples are introduced where embedded control system that perform their unique role such as smart phone and network system organically configure to create new system. According to this trend, organic interface and reliability of each embedded control system are becoming important evaluation factors. The purpose of this paper is to develop quality evaluation criteria method for automobile embedded system, among the fields that use embedded control systems. In order to satisfy high quality level requirements of automobile embedded control system, we surveyed latest trend of automobile embedded control system, analyzed structure and application technology of embedded control system, to establish quality evaluation criteria and method for automobile embedded control system by referring international standard for software (ISO/IEC 9126), and international standard for electric & electronic products (ISO 26262).

• Journal of the Korean Society of School Health
• /
• v.12 no.2
• /
• pp.207-215
• /
• 1999

The objectives of this study are to explain the use of media materials in school health education with other related factors in elementary, middle, and high schools in Korea. The data were collected by questionnaires from June to September in 1998. The number of subjects were 294 school nurses. The PC-SAS program was used for statistical analysis such as percent distribution, chi-squared test, spearman correlation test, and logistic regression. The use of media materials in health education has become extremely common. Unfortunately, much of the early materials were of poor production quality, reflected low levels of interest, and generally did little to enhance health education programming. A recent trend in media materials is a move away from the fact filled production to a more affective, process-oriented approach. There is an obvious need for health educators to use high-quality, polished productions in order to counteract the same levels of quality used by commercial agencies that often promote "unhealthy" lifestyles. Health educators need to be aware of the advantages and disadvantages of the various forms of media. Selecting media materials should be based on more than cost, availability, and personal preference. Selection should be based on the goal of achieving behavioral objectives formulated before the review process begins. The decision to use no media materials rather than something of dubious quality usually be the right decision. Poor-quality, outdated, or boring materials will usually have a detrimental effect on the presentation. Media materials should be viewed as vehicles to enhance learning, not products that will stand in isolation. Process of materials is an essential part of the educational process. The major results were as follows : 1. The elementary schools used the materials more frequently. But the production rate of media materials was not enough. The budget was too small for a wide use of media materials in school health education. These findings suggest that all schools have to increase the budget of health education programs. 2. Computers offer an incredibly diverse set of possibilities for use in health education, ranging from complicated statistical analysis to elementary-school-level health education games. But the use rate of this material was not high. The development of related software is essential. Health educators would be well advised to develop a basic operating knowledge of media equipment. 3. In this study, the most effective materials were films in elementary school and videotapes in middle and high school. Film tends to be a more emotive medium than videotape. The difficulties of media selection involved the small amount of extant educational materials. Media selection is a multifaceted process and should be based on a combination of sound principles. 4. The review of material use following student levels showed that the more the contents were various, the more the use rate was high. 5. Health education videotapes and overhead projectors proved the most plentiful and widest media tools. The information depicted was more likely to be current. As a means to display both text and graphic information, this instructional medium has proven to be both effective and enduring. 6. An analysis of how effective the quality of school nurse and school use of media materials shows a result that is not complete (p=0.1113). But, the budget of health education is a significant variable. The increase of the budget therefore is essential to effective use of media materials. From these results it is recommended that various media materials be developed and be wide used.

• International Journal of Advanced Culture Technology
• /
• v.9 no.4
• /
• pp.329-344
• /
• 2021

AI assistant, a software interface designed to interact with a user in a natural way and perform specific tasks on the user's behalf, receives increasing attention from both scholars and practitioners. While most of the literatures explain about technical aspects, little is known about the social and psychological factors that intimately influence consumers when using it. This study sheds light on the reason people use AI assistant and how perceived values influence on intention of continuous usage. A total of 361 AI assistant users participated in an online survey, and all were recruited from a major online panel in South Korea. The results from the principal component analysis suggest five social and psychological motives: self-expression, quality of life, entertainment, information, and compatibility. In addition, perceived values, informativeness, entertainment, and trustworthiness, positively predict the intention to use AI assistant. This research provides theoretical contributions from finding motivations of AI assistant usage and from the effects of perceived values on the intention to use it. Practical implications should not be overlooked in this ever-expanding AI industry.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.3
• /
• pp.99-109
• /
• 2021

In recent machine learning studies, in order to consider the quality and completeness of data, derivation of non-functional requirements for data has been proposed from the viewpoint of requirements engineering. In particular, requirements engineers have defined data requirements in machine learning. In this study, data requirements were derived at the data acquisition (DAQ) stage, where data is collected and stored before data preprocessing. Through this, it is possible to express the requirements of all data required in the existing DAQ system, the presence of tasks (functions) satisfying them, and the relationship between the requirements and functions. In addition, it is possible to elicit requirements and to define the relationship, so that a software design document can be produced, and a systematic approach and direction can be established in terms of software design and maintenance. This research using existing DAQ system cases, scenarios and use cases for requirements engineering approach are created, and data requirements for each case are extracted based on them, and the relationship between requirements, functions, and goals is illustrated through goal modeling. Through the research results, it was possible to extract the non-functional requirements of the system, especially the data requirements, from the DAQ system using requirements engineering.

• Journal of Environmental Science International
• /
• v.26 no.10
• /
• pp.1185-1200
• /
• 2017

Solid waste management is currently a topic of concern, particularly in the protection of humans and the environment from toxic pollutants and hazardous materials. The importance of solid waste management is recognized at international, national, and community levels. Different agendas have been prioritized and assigned to improve quality of life, productivity, and health, and reduce the burden of pollution. Suitable management of solid waste requires appropriate technology that is affordable, socially accepted, and environmentally friendly. The use of a smart management system involving system dynamics can save energy, money, and labor. System dynamics is a computer-based approach that aids in predicting the behavioral patterns of variables, and correlating dependent and independent variables. The inclusion of system dynamics-based models in solid waste management has recently become more common. In this review, we used system dynamics to determine methods to disentangle solid waste management systems and analyzed different studies on solid waste management using system dynamics in different countries in detail. We also discussed the various software packages that are available for system dynamics and their usefulness for waste management. This review may help in understanding current solid waste management practices using system dynamics.

• ETRI Journal
• /
• v.44 no.5
• /
• pp.733-745
• /
• 2022

In software-defined wireless networking (SDWN), the optimal routing technique is one of the effective solutions to improve its performance. This routing technique is done by many different methods, with the most common using integer linear programming problem (ILP), building optimal routing metrics. These methods often only focus on one routing objective, such as minimizing the packet blocking probability, minimizing end-to-end delay (EED), and maximizing network throughput. It is difficult to consider multiple objectives concurrently in a routing algorithm. In this paper, we investigate the application of machine learning to control routing in the SDWN. An intelligent routing algorithm is then proposed based on the machine learning to improve the network performance. The proposed algorithm can optimize multiple routing objectives. Our idea is to combine supervised learning (SL) and reinforcement learning (RL) methods to discover new routes. The SL is used to predict the performance metrics of the links, including EED quality of transmission (QoT), and packet blocking probability (PBP). The routing is done by the RL method. We use the Q-value in the fundamental equation of the RL to store the PBP, which is used for the aim of route selection. Concurrently, the learning rate coefficient is flexibly changed to determine the constraints of routing during learning. These constraints include QoT and EED. Our performance evaluations based on OMNeT++ have shown that the proposed algorithm has significantly improved the network performance in terms of the QoT, EED, packet delivery ratio, and network throughput compared with other well-known routing algorithms.

• Journal of Multimedia Information System
• /
• v.2 no.3
• /
• pp.255-262
• /
• 2015

The modern manufacturing systems and technologies produce products that are more accurate day by day. This can be reached mainly by improvement the manufacturing process with at the same time restricting more and more the quality specifications and reducing the uncertainty in part. The main objective an industry becomes to lower the part's variability, since the less variability - the better is product. One of the part of this task is measuring the object's uncertainty. The main purpose of this study is to understand the application of bootstrap method for uncertainty evaluation. Bootstrap method is a collection of sample re-use techniques designed to estimate standard errors and confidence intervals. In the case study a surface of an automobile engine block - (Top view side) is measured by Coordinate Measuring Machine (CMM) and analyzed for uncertainty using Geometric Least Squares in complex with bootstrap method. The designed experiment is composed by three similar measurements (the same features in unique reference system), but with different points (5, 10, 20) concentration at each level. Then each cloud of points was independently analyzed by means of non-linear Least Squares, after estimated results have been reported. A MatLAB software tool used to generate new samples using bootstrap function. The results of the designed experiment are summarized and show that the bootstrap method provides the possibility to evaluate the uncertainty without repeating the Coordinate Measuring Machine (CMM) measurements many times, i.e. potentially can reduce the measuring time.