• The KIPS Transactions:PartD
• /
• v.15D no.3
• /
• pp.375-386
• /
• 2008

Recently, development paradigm of information system is turning into object oriented and component based, and this methodology is leading the software industry. To acclimatize aptly to this trend, users demand the assessment of software expenses to change with the appropriate model of computing costs of the environment, and some people are actually studying the concept of Object Oriented Function Point and UCP method. Especially, Object Oriented Function Point Measurement Process has good points in overcoming the bound of LOC and the existing the Function Point Measurement Process because Object Oriented Function Point Measurement Process is applicable to the early stage of development project mainly with the used cases, and valid to the life long period as the each stage of software products develops, and always understandable to communicate with users by the UML mark rules. Accordingly, this research is to measure Functional Point at ROFP and AOFP in accordance with the development project of information system by the national defense CBD methodology procedures and UML Interrelation Analysis that are recently and widely used in the developmental environment of object oriented information system. Furthermore, this study suggests the measurement method to obtain Functional Point, and identifies service function and object/class function in the correlation analysis of use case and class based on the products and UML modeling via traditional FPA model and object oriented FPA model. Above all, this study is to demonstrate the improvement of traditional Function Point Measurement Process, IFPUG-CPM and software cost basis, and reveal Function Point Measurement Process, which is appropriate to the development of object oriented information system, and suggest the evaluation results of the compatibility through case studies.

• The KIPS Transactions:PartD
• /
• v.19D no.1
• /
• pp.29-38
• /
• 2012

Software globalization is becoming more important worldwide but little is known about how globalization technologies are actually carried out in the Korean software industry. In this paper, we have designed Globalization Quality Management (GQM) framework and applied the framework to the industry domestically for the first time. GQM provides a structured and effective way for software organizations to adopt globalization practices and evaluate the results. GQM consists of three main components: 1) software quality management process, 2) globalization support model and 3) globalization assessment model. This framework also supports both plan-driven and iterative/incremental development methods. On the basis of the GQM, a survey study was conducted among software engineering professionals, gathering the data from 31 IT companies across 7 large-scale projects in Korea. The result indicate that the evaluation score for globalization capability is 2.47 and global readiness is 2.55 out of 5 points. Also It said that internationalized product design (32.9%) and global/local product requirements analysis (28%) are needed to be taken care of first.

• KIPS Transactions on Software and Data Engineering
• /
• v.12 no.6
• /
• pp.243-250
• /
• 2023

Chest X-ray is radiological examination for xeamining the lungs and haert, and is particularly widely used for diagnosing lung disease. Since the quality of these chest X-rays can affect the doctor's diagnosis, the process of evaluating the quality must necessarily go through. This process can involve the subjectivity of radiologists and is manual, so it takes a lot of time and csot. Therefore, in this paper, based on the chest X-ray quality assessment guidelines used in clinical settings, we propose a tool that automates the five quality assessments of artificial shadow, coverage, patient posture, inspiratory level, and permeability. The proposed tool reduces the time and cost required for quality judgment, and can be further utilized in the pre-processing process of selecting high-quality learning data for the development of a learning model for diagnosing chest lesions.

• Journal of Software Assessment and Valuation
• /
• v.17 no.2
• /
• pp.31-38
• /
• 2021

In order to analyze the similarity of the source code object material, the source code on both sides must be able to be compiled and executed. In particular, in the case of hardware-integrated software, it is necessary to check whether the hardware interface matches. However, currently, the source code is provided in an incomplete state which is not original of source code used in developing steps. The complainant confirms that the executing characteristics are similar to their own in the expression and function of the output, and request an evaluation. When a source code compilation error occurs during the evaluation process, the experts draw a flowchart of the source code and applies the method of tracing the code flow for each function as indirect method. However, this method is indirect and the subjective judgment is applied, so there is concern about the contention of objectivity in the similarity evaluation result. In this paper, the problems of unverified source code similarity analysis and improvement directions are dealt with, through the analysis cases of source code disputes applied to embedded systems.

• Fisheries and Aquatic Sciences
• /
• v.24 no.4
• /
• pp.139-152
• /
• 2021

The main purpose of this study is to fit catch-per-unit-effort (CPUE) data about Korea chub mackerel (Scomber japonicus) stock with a state-space production (SSP) model, and to provide stock assessment results. We chose a surplus production model for the chub mackerel data, namely annual yield and CPUE. Then we employed a state-space layer for a production model to consider two sources of variability arising from unmodelled factors (process error) and noise in the data (observation error). We implemented the model via script software ADMB-RE because it reduces the computational cost of high-dimensional integration and provides Markov Chain Monte Carlo sampling, which is required for Bayesian approaches. To stabilize the numerical optimization, we considered prior distributions for model parameters. Applying the SSP model to data collected from commercial fisheries from 1999 to 2017, we estimated model parameters and management references, as well as uncertainties for the estimates. We also applied various production models and showed parameter estimates and goodness of fit statistics to compare the model performance. This study presents two significant findings. First, we concluded that the stock has been overexploited in terms of harvest rate from 1999 to 2017. Second, we suggest a SSP model for the smallest goodness of fit statistics among several production models, especially for fitting CPUE data with fluctuations.

• Journal of Energy Engineering
• /
• v.18 no.1
• /
• pp.63-68
• /
• 2009

The safety culture of an organization is very complex and hard to study, but it is possible to examine norms that make up the culture. This paper describes of a Process Safety Management (PSM) climate assessment tool developed in high risk industry such as chemical industries. The main purpose is to develop measuring software tool behaviors by examining their nature and strength and by analysing underlying factors that offer explanations for attitudinal differences. We reviewed the current techniques and literatures available to assess safety climate and culture, conducted focus group interviews and discussions. Based on the reviews and focus group, PSM climate assessment questionnaires and an online application program were developed. A pilot assessment was done at a chemical plant in Korea and the safety climate profile was completed. It was suggested to have a constant feedback from different sectors of industry to improve the application.

• Education of Primary School Mathematics
• /
• v.22 no.4
• /
• pp.239-259
• /
• 2019

The 2015 revised mathematics curriculum specified software education as a mandatory curriculum amid a trend in which the software environment was extended to daily life due to the fourth industrial revolution. It also calls for a paradigm shift in lessons that incorporate learning and evaluation by specifying a process-oriented assessment. This study focused on addition and subtraction classes based on computational thinking skills that integrate mathematics learning and evaluation. Two fourth grade classes of elementary schools in Seoul were selected to conduct a pre- and post- test of metacognition and mathematics achievement through quantitative research. Also, a mixed study was conducted to analyze students' activities and opinions in parallel. The results of the study confirmed that the computational thinking-based classes, which incorporate mathematics learning and evaluation, had a positive effect on the metacognition of elementary school students and the improvement of their achievement scores. In addition to those identified in this study, further studies on other factors are proposed.

• Journal of The Korean Association of Information Education
• /
• v.14 no.4
• /
• pp.659-666
• /
• 2010

Performance assessment is recognized as a proper evaluation method to integrate the teaching and learning process into the evaluation one and as an essential means to produce meaningful evaluation results. However, it has deteriorated into a teacher-centric evaluation method with the students excluded due to the cost and time issues and the heavy workload on the teachers. Those changes have affected the reliability of the assessment results. This study developed and applied a web-based performance assessment system by using Moodle, open source software, to help the teachers efficiently run performance assessment in school and the students increase their learning effects. As a result, it lifted the burden of system development from the shoulders of the teachers trying to do web-based performance assessment and solved the reliability issue raised in the old peer evaluation approach through diverse strategies offered by Moodle.

• Korean Journal of Computational Design and Engineering
• /
• v.20 no.3
• /
• pp.238-245
• /
• 2015

Vulnerability assessment is a process to calculate the damage degree of a combat vehicle when the combat vehicle is attacked by an enemy. When the vehicle is hit, it is necessary to analyze the shot line to calculate which components are damaged and judge whether the armor of the vehicle is penetrated by enemy's warhead. To analyze the shot line efficiently, this paper presents the target modeling and the shot line analysis system to assess vulnerability of the ground combat vehicle. This system is easily able to do several functions: 1) the program reads STL files converted from CAD model which is designed by commercial CAD software. 2) It calculates the intersection between triangle of STL mesh and the shot line, and check if the components of the model are penetrated. 3) This program can visualize the results using OpenGL. The vulnerability assessment using the shot line analysis can be used to model the armor of the combat vehicle and arrange the inner components effectively in the early stage of development of the combat vehicle.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.05c
• /
• pp.1701-1704
• /
• 2003

IT 산업의 급속한 확대에 따라 소프트웨어 분야에 대한 제품 및 생성 프로세스 관련 표준 연구가 국내에서 활발하게 진행되고 있다. 본 논문에서는 소프트웨어 생명주기 프로세스에 대한 국제표준의 ISO/IEC 12207, ISO/IEC 15504(일명 SPICE), SW-CMM, CMMI 등에서 정의하고 있는 프로세스에서 공통적으로 포함되어 있는 형상관리 프로세스에 대한 표준들 간의 활동 비교를 통해 프로세스 개선 모델들의 특징을 파악하였다.