• 제목/요약/키워드: Software GPS Receiver

검색결과 110건 처리시간 0.026초

GPS 소프트웨어 수신기에 대한 GPS 의사위성의 영향 분석 (Impacts of GPS Pseudolite Signals on GPS Software Receivers)

  • 권금철;장윤재;양철관;심덕선
    • 한국항행학회논문지
    • /
    • 제16권4호
    • /
    • pp.627-634
    • /
    • 2012
  • 이 논문은 의사위성 신호에 대한 GPS 소프트웨어 수신기의 성능을 분석하고자 한다. 의사위성이 계속 켜져있을 경우와 펄싱이 주어졌을 경우에 대해서, 의사위성의 신호세기와 의사위성과 수신기 사이의 거리에 따라 의사위성이 GPS 소프트웨어 수신기에 미치는 영향을 알아본다.

소프트웨어 기반의 실시간 GPS L1 수신기를 위한 블록 상관기 (Block Correlator for Real-Time GPS L1 Software Receiver)

  • 김태희;이상욱
    • 한국위성정보통신학회논문지
    • /
    • 제6권1호
    • /
    • pp.80-85
    • /
    • 2011
  • 본 논문에서는 소프트웨어 기반의 실시간 GPS L1 수신기에 대한 블록 상관기법을 제안한다. 최근 다양한 위성항법 환경에서 보다 효율적인 항법 수신기 개발을 위하여 소프트웨어 기반의 실시간 수신기 개발이 필요하다. 실시간 소프트웨어 수신기는 입력신호 처리부, 신호획득부, 신호추적부, 항법데이터 처리부, 항법해 계산부로 구성되고 각 처리부는 해당 기능을 수행하기 위한 단위 컴포넌트로 구성된다. 이러한 소프트웨어 환경에서의 수신기 개발을 용이하게 수행하기 위한 소프트웨어 기반의 수신기를 개발함으로써 다양한 모델을 적용하거나 새로운 컴포넌트 조합으로 다양한 시뮬레이션을 수행할 수 있다는 장점을 제공하고 있다. 본 논문에서는 이러한 소프트웨어 기반의 수신기가 실시간의 성능을 나타낼 수 있는 블록 상관기법을 제안하고 이에 대한 성능을 검증하였다.

Fail-Safe Seaway를 위한 GPS 수신기의 다중비트처리기법 연구 (A Study on Multi-Bit Processing Scheme of GPS Receiver for Fail-Safe Seaway)

  • 조득재;오세웅;서상현
    • 한국항해항만학회지
    • /
    • 제29권10호
    • /
    • pp.877-882
    • /
    • 2005
  • 해상에서 항법시스템의 고장이나 중단에도 불구하고 연속적인 항법 서비스의 제공이 가능하도록 하는 Fail-Safe Seaway 방안이 필요하다. 모든 위성 및 지상전파항법의 통합전파항법기술을 위해 본 논문에서는 소프트웨어 라디오 기술을 이용한 수신기 특히, GPS 수신기의신호처리 알고리즘 설계에 초점을 맞춘다. 현재 소프트웨어 GPS 수신기의 가장 큰 문제점은 실시간 구현의 어려움에 있다. GPS 신호와 같이 넓은 대역폭을 갖는 신호를 다중 상관기로 구현하는데 있어서, 상용 프로세서에서는 많은 연산량이 요구되어 실시간 구현이 어렵기 때문이다. 본 논문은 실시간 구현 시에 요구되는 많은 연산량을 해결하기 위해 소프트웨어 GPS 수신기 내부에서 생성하는 다중비트의 반송파 및 코드를 일정한 패턴으로 간소화시켜 연산량을 크게 감소시키는 방법을 제안한다.

Fail-Safe Seaway를 위한 GPS 수신기의 다중비트처리기법 연구 (A Study on Multi-Bit Processing Scheme of GPS Receiver for Fail-Safe Seaway)

  • 조득재;오세웅;서상현
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2005년도 추계학술대회 논문집
    • /
    • pp.37-42
    • /
    • 2005
  • 해상에서 항법시스템의 고장이나 중단에도 불구하고 연속적인 항법 서비스의 제공이 가능하도록 하는 Fail-Safe Seaway 방안이 필요하다. 모든 위성 및 지상전파항법의 통합전파항법기술을 위해 본 논문에서는 소프트웨어 라디오 기술을 이용한 수신기 특히, GPS 수신기의 신호처리 알고리즘 설계에 초점을 맞춘다. 현재 소프트웨어 GPS 수신기의 가장 큰 문제점은 실시간 구현의 어려움에 있다. GPS 신호와 같이 넓은 대역폭을 갖는 신호를 다중 상관기로 구현하는데 있어서, 상용 프로세서에서는 많은 연산량이 요구되어 실시간 구현이 어렵기 때문이다 본 논문은 실시간 구현 시에 요구되는 많은 연산량을 해결하기 위해 소프트웨어 GPS 수신기 내부에서 생성하는 다중비트의 반송파 및 코드를 일정한 패턴으로 간소화시켜 연산량을 크게 감소시키는 방법을 제안한다.

  • PDF

A Design of Software Receiver for GNSS Signal Processing

  • 최승현;김재현;신천식;이상욱;김재훈
    • 한국위성정보통신학회논문지
    • /
    • 제2권2호
    • /
    • pp.48-52
    • /
    • 2007
  • 최근들어 하드웨어방식의 GPS 수신기를 소프트웨어 방식의 Software-Defined Radio(SDR)기법으로 구성하는 연구가 활발히 진행되고 있다. 이러한 소프트웨어 기반의 GPS 수신기는 기존의 하드웨어 방식으로 처리하는 신호획득부와 추적부를 마이크로 프로세서를 통해 소프트웨어 기법으로 처리하는 것을 말한다. 본 논문에서는 이러한 소프트웨어 기법을 이용하여 GPS 수신기를 설계하며 PC 기반에서 시뮬레이션을 통해 신호획득부, 추적부, 메시지 복조부를 설계하고 검증한다. 또한 의사거리 오차를 도출하기 위하여 신호 획득부와 추적부에 대해 효율적인 알고리즘을 제안하고 최종적으로L1 주파수대역의 여러 위성을 통해 수신된 채널간의 상대적 지연을 통해 의사거리를 계산한다. 본 논문에서 제시된 수신기기법은 향후 개발목표인 GPS/Galileo 복합시스템의 개발요소에 포함될 것이며 규격 및 성능을 검증할 방법을 제시할 뿐만 아니라 다양한 디버깅 환경을 제공함으로써 개발단계에 매우 유용하게 적용될 것이다.

  • PDF

Chip Set을 이용한 L1 C/A Code GPS 수신기 개발 (Development of L1 C/A Code GPS receiver using chipset)

  • 심우성;박상현;이상정
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
    • /
    • pp.1376-1379
    • /
    • 1996
  • In this paper a GPS receiver is developed using commercial chipsets. GP2010 RF front end and GP2021 Multi-channel correlator of GEC PLESSY are adapted in designing the receiver hardware. MC 68340 is used for controlling the correlator GP2021 and implementing the navigation processing. Also presented are some test results of the developed receiver whose software has an interrupt driven structure rather than common real-time kernel based structure.

  • PDF

SGR에서 신호처리과정의 분석과 시뮬레이션 (Analysis and Simulation of Signal Acquisition of GPS Software Receiver)

  • 장위;서희종
    • 한국전자통신학회논문지
    • /
    • 제6권1호
    • /
    • pp.27-33
    • /
    • 2011
  • 본 논문에서는 SGR(software-based Global Positioning System receiver)에서 GPS(Global Positioning System)의 자료처리과정을 분석하기 위해서, GPS 신호의 수신방법을 심도있게 분석했다. 그리고 이 처리과정을 Matlab를 사용해서 모의실험을 했다. 실험결과, 이 분석방법의 타당성을 찾을 수 있었고, 이 실험은 실제 환경조건에서와 일치함을 확인할 수 있었다. 또 SGR의 성능을 향상시키기 위해서는 수신기의 성능을 향상시켜야 한다는 사실을 확인 할 수 있었는데, 동조되는 최적의 주파수는 수십 Hertz내에서 위상을 비교해서 찾을 수 있었다.

Robustness Examination of Tracking Performance in the Presence of Ionospheric Scintillation Using Software GPS/SBAS Receiver

  • Kondo, Shun-Ichiro;Kubo, Nobuaki;Yasuda, Akio
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
    • /
    • pp.235-240
    • /
    • 2006
  • Ionospheric scintillation induces a rapid change in the amplitude and phase of radio wave signals. This is due to irregularities of electron density in the F-region of the ionosphere. It reduces the accuracy of both pseudorange and carrier phase measurements in GPS/satellite based Augmentation system (SBAS) receivers, and can cause loss of lock on the satellite signal. Scintillation is not as strong at mid-latitude regions such that positioning is not affected as much. Severe effects of scintillation occur mainly in a band approximately 20 degrees on either side of the magnetic equator and sometimes in the polar and auroral regions. Most scintillation occurs for a few hours after sunset during the peak years of the solar cycle. This paper focuses on estimation of the effects of ionospheric scintillation on GPS and SBAS signals using a software receiver. Software receivers have the advantage of flexibility over conventional receivers in examining performance. PC based receivers are especially effective in studying errors such as multipath and ionospheric scintillation. This is because it is possible to analyze IF signal data stored in host PC by the various processing algorithms. A L1 C/A software GPS receiver was developed consisting of a RF front-end module and a signal processing program on the PC. The RF front-end module consists of a down converter and a general purpose device for acquiring data. The signal processing program written in MATLAB implements signal acquisition, tracking, and pseudorange measurements. The receiver achieves standalone positioning with accuracy between 5 and 10 meters in 2drms. Typical phase locked loop (PLL) designs of GPS/SBAS receivers enable them to handle moderate amounts of scintillation. So the effects of ionospheric scintillation was estimated on the performance of GPS L1 C/A and SBAS receivers in terms of degradation of PLL accuracy considering the effect of various noise sources such as thermal noise jitter, ionospheric phase jitter and dynamic stress error.

  • PDF

소프트웨어 기반 Loran-C 신호 처리 (Software-Based Loran-C Signal Processing)

  • 임준혁;임성혁;김우현;지규인
    • 제어로봇시스템학회논문지
    • /
    • 제16권2호
    • /
    • pp.188-193
    • /
    • 2010
  • With GPS being the primary navigation system, Loran use is in steep decline. However, according to the final report of vulnerability assessment of the transportation infrastructure relying on the global positioning system prepared by the John A. Volpe National Transportation Systems Center, there are current attempts to enhance and re-popularize Loran as a GPS backup system through the characteristic of the ground based low frequency navigation system. To advance the Loran system such as Loran-C modernization and eLoran development, research is definitely needed in the field of Loran-C receiver signal processing as well as Loran-C signal design and the technology of a receiver. We have developed a set of Matlab tools, which implement a software Loran-C receiver that performs the receiver's position determination through the following procedure. The procedure consists of receiving the Loran-C signal, cycle selection, calculation of the TDOA and range, and receiver's position determination through the Least Square Method. We experiences the effect of an incorrect cycle selection and various error factors (ECD, ASF, sky wave, CRI, etc.) from the result of the Loran-C signal processing. It is apparent that researches which focus on the elimination and mitigation of various error factors need to be investigated on a software Loran-C receiver. These aspects will be explored in further work through the method such as PLL and Kalman filtering.

의사거리 측정치를 이용하는 기만신호 검출 기법의 성능 비교 (Performance Comparison of Anti-Spoofing Methods using Pseudorange Measurements)

  • 조성룡;신미영;이상정;박찬식
    • 한국군사과학기술학회지
    • /
    • 제13권5호
    • /
    • pp.793-800
    • /
    • 2010
  • GPS spoofing is an intentional interference which uses the mimic GPS signals to fake the receivers. The generic GPS receiver is hard to recognize the spoofing signal because the spoofer generates the fake signals as close as possible to the GPS signal. So the spoofer can do critical damage to public operations. This paper introduces a basic concept of spoofing and analyzes the effect of the spoofing signal to the GPS receiver. Also for stand-alone GPS receivers, two anti-spoofing methods are implemented : RAIM based method and the SQM based method. To evaluate the performance of anti-spoofing method, the software based spoofing signal generator and GPS signal generator are implemented. The performance of the anti-spoofing methods obtained using the output of the software based GPS receiver shows that SQM based method is more effective when multiple spoofing signals exist.