• Journal of Bio-Environment Control
• /
• v.30 no.1
• /
• pp.27-36
• /
• 2021

A capacitive water sensor was developed to measure the capacitance over a wide part of a substrate using an insulated electrode plate (30 cm × 10 cm) with copper and Teflon attached on either side of the substrate. This study aimed to convert the capacitance output obtained from the condenser-type capacitance sensor into the substrate water content. The quantification experiment was performed by measuring the changes in substrate water weight and capacitance while providing a nutrient solution and by subsequently comparing these values. The substrate water weight and capacitance were measured every 20 to 30 seconds using the sensor and load cell with a software developed specifically for this study. Using a curve-fitting program, the substrate water content was estimated from the output of the capacitance using the water weight and capacitance of the substrate as variables. When the amount of water supplied was increased, the capacitance tended to increase. Coefficient of variation (CV) in capacitance according to the water weight in substrate was greater with the 1.0 kg of water weight, compared with other weights. Thus, the fitting was performed with higher than 1.0 kg, from 1.7 to 6.0 kg of water weight. The correlation coefficient between the capacitance and water weight in substrate was 0.9696. The calibration equation estimated water content from the capacitance, and it was compared with the substrate water weight measured by the load cell.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.19-26
• /
• 2021

The lattice structure is attracting attention from industry because of its excellent strength and stiffness, ultra-lightweight, and energy absorption capability. Despite these advantages, widespread commercialization is limited by the difficult manufacturing processes for complex shapes. Additive manufacturing is attracting attention as an optimal technology for manufacturing lattice structures as a technology capable of fabricating complex geometric shapes. In this study, a unit cell was formed using a three-dimensional coordinate method. The relative density relational equation according to the boundary box size and strut radius of the unit cell was derived. Simple cubic (SC), body-centered cubic (BCC), and face-centered cubic (FCC) with a controlled relative density were designed using modeling software. The accuracy of the equations for calculating the relative density proposed in this study secured 98.3%, 98.6%, and 96.2% reliability in SC, BCC, and FCC, respectively. A simulation of the lattice structure revealed an increase in compressive yield load with increasing relative density under the same cell arrangement condition. The compressive yield load decreased in the order of SC, BCC, and FCC under the same arrangement conditions. Finally, structural optimization for the compressive load of a 20 mm × 20 mm × 20 mm structure was possible by configuring the SC unit cells in a 3 × 3 × 3 array.

• Journal of the Korea Convergence Society
• /
• v.13 no.5
• /
• pp.229-236
• /
• 2022

The goal of this research is to understand the extent to which active seniors' mobile app usage level affects their lifestyle and life satisfaction. For this, we surveyed for 15 days in early December 2021 targeting about 150 users nationwide. As the questionnaire content, the independent variable was "mobile app usage level", the parameter was "lifestyle", and the dependent variable was "life satisfaction". As a result of empirical analysis, reliability and exploratory factors between each variable were verified, and it was confirmed that internal consistency was secured. It was investigated that the concentration validity of each item was generally well confirmed. As a result of hypothesis testing by the structural equation, 'App usage level ⇨ Lifestyle' was 0.244, 'Lifestyle ⇨ Life satisfaction' 0.707, and 'App usage level ⇨ Life satisfaction 0.141' was adopted. This study shows that the higher the level of mobile app usage of active seniors, the higher the lifestyle. Also, the better the lifestyle, the better the quality of life. It is analyzed that life satisfaction will improve as the level of mobile app use increases. Therefore, in order to improve life satisfaction, it seems necessary to increase the level of app use and lifestyle.

• Animal Bioscience
• /
• v.35 no.5
• /
• pp.690-697
• /
• 2022

Objective: This study aimed to evaluate the effect of the ad libitum and restricted feeding regimen on fasting heat production (FHP) and body composition. Methods: Twelve Hubbard broilers breeders were selected with the same body weight and submitted in two feeding regimes: Restricted (T1) with feed intake of 150 g/bird/d and ad libitum (T2). The birds were randomly distributed on the treatments in two runs with three replications per treatment (per run). The birds were adapted to the feed regimens for ten days. After that, they were allocated in the open-circuit chambers and kept for three days for adaptation. On the last day, oxygen consumption (VO₂) and carbon dioxide production (VCO₂) were measured by 30 h under fasting. The respiratory quotient (RQ) was calculated as the VCO₂/VO₂ ratio, and the heat production (HP) was obtained using the Brower equation (1985). The FHP was estimated throughout the plateau of HP 12 hours after the feed deprivation. The body composition was analyzed by dual-energy X-ray absorptiometry scanning at the end of each period. Data were analyzed for one-way analysis of variance using the Minitab software. Results: The daily feed intake was 30 g higher to T2 (p<0.01) than the T1. Also, the birds of the T2 had significatively (p<0.05) more oxygen consumption (+3.1 L/kg^0.75/d) and CO₂ production (+2.2 L/kg^0.75/d). That resulted in a higher FHP 359±14 kJ/kg^0.75/d for T2 than T1 296±17.23 kJ/kg^0.75/d. In contrast, the RQ was not different between treatments, with an average of 0.77 for the fasting condition. In addition, protein and fat composition were not affected by the treatment, while a tendency (p<0.1) was shown to higher bone mineral content on the T1. Conclusion: The birds under ad libitum feeding had a higher maintenance energy requirement but their body composition was not affected compared to restricted feeding.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1263-1263
• /
• 2001

The amounts of organic matter present in soil and the rate of soil organic matter (SOM) turnover are influenced by agricultural management practice, such as rotation, tillage, forage plow down direct seeding and manure application. The amount of nutrients released from SOM is highly dependent upon the state of the organic matter. If it contains a large proportion of light fractions (low-density) more nutrients will be available to the glowing crops. However, if it contains mostly heavy fractions (high-density) that are difficult to breakdown, then lesser amounts of nutrients will be available. The state of the SOM and subsequent release of nutrients into the soil can be predicted by NIRS as long as a robust regression equation is developed. The NIRS method is known for its rapidity, convenience, simplicity, accuracy and ability to analyze many constituents at the same time. Our hypothesis is that the NIRS technique allows researchers to investigate fully and in more detail each field for the status of SOM, available moisture and other soil properties in Alberta soils for precision farming in the near future. One hundred thirty one (131) Alberta soils with various levels (low 2-6%, medium 6-10%, and high >10%) of organic matter content and most of dry land soils, including some irrigated soils from Southern Alberta, under various management practices were collected throughout Northern, Central and Southern Alberta. Two depths (0- 15 cm and 15-30 cm) of soils from Northern Alberta were also collected. These air-dried soil samples were ground through 2 mm sieve and scanned using Foss NIR System 6500 with transport module and natural product cell. With particle size above 150 microns only, the “Ludox” method (Meijboom, Hassink and van Noorwijk, Soil Biol. Biochem.27: 1109-1111, 1995) which uses stable silica, was used to fractionate SOM into light, medium and heavy fractions with densities of <1.13, 1.13-1.37 and >1.37 respectively, The SOM fraction with the particle size below 150 microns was discarded because practically, this fraction with very fine particles can't be further separated by wet sieving based on density. Total organic matter content, mechanical texture, ash after 375$^{\circ}C$, and dry matter (DM) were also determined by “standard” soil analysis methods. The NIRS regression equations were developed using Infra-Soft-International (ISI) software, version 3.11.

• Journal of Korea Port Economic Association
• /
• v.38 no.4
• /
• pp.45-64
• /
• 2022

Due to the recent and rapid globalization, logistics outsourcing has expanded globally and is seen as a means of creating a robust logistics system. However, many businesses continue to have difficulties with their logistics outsourcing contracts, which compels them to reinstate the logistics function for internal management. This study aims to investigate how organizational capabilities of logistics service providers (LSPs), notably flexibility, integration, innovation, and technological capabilities, impact on the logistics outsourcing success in Ugandan food processing firms. Using a structured questionnaire survey, cross-sectional data collected from 211 food processing firms in Kampala - Uganda were analyzed by partial least squares-structural equation modeling (PLS-SEM) using SmartPLS 3.3.7 software to examine the theorized relationships. The study findings revealed that whereas the technological and innovation capabilities positively and significantly influence logistics outsourcing success, the effects of flexibility and integration capabilities were insignificant. Additionally, the importance-performance map analysis (IPMA) reveals that the technological capability is a priority capability, followed by the innovation capability if logistics outsourcing success is to be achieved. Conversely, flexibility and integration capabilities are of low priority.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.4
• /
• pp.76-89
• /
• 2023

One of the technologies in urban agriculture, hydroponics cultivation, has primarily focused on technological development, resulting in a lack of research on urban agriculture's cultural utilization aspects, encompassing cultural values associated with urban residents' leisure activities. Therefore, this study aimed to identify the participation constraints perceived by school community members when implementing urban farming activities using hydroponics and understand the structural relationships between the variables that influence decision-making from the perspective of leisure activities in urban farming. As a result, participation constraints in urban farming activities utilizing hydroponics were first categorized into intrinsic, interpersonal, and structural factors. Second, the results of hypothesis model verification showed that interpersonal constraints significantly influenced the participants' willingness to participate and their expected behavior. This study found the multidimensional perceptions of school community members regarding hydroponic urban farming conducted in urban spaces, particularly rooftops, and revealed the influence of decision-making factors on participation when conducting urban farming activities using hydroponic cultivation.

• KIPS Transactions on Software and Data Engineering
• /
• v.12 no.3
• /
• pp.141-148
• /
• 2023

Accurate overlay metrology is essential to achieve high yields of semiconductor products. Overlay metrology performance is greatly affected by overlay target design and measurement method. Therefore, in order to improve the performance of the overlay target, measurement methods applicable to various targets are required. In this study, we propose a new algorithm that can measure image-based overlay. The proposed measurement algorithm can estimate the sub-pixel position by using a motion vector. The motion vector may estimate the position of the sub-pixel unit by applying a quadratic equation model through polynomial expansion using pixels in the selected region. The measurement method using the motion vector can calculate the stacking error in all directions at once, unlike the existing correlation coefficient-based measurement method that calculates the stacking error on the X-axis and the Y-axis, respectively. Therefore, more accurate overlay measurement is possible by reflecting the relationship between the X-axis and the Y-axis. However, since the amount of computation is increased compared to the existing correlation coefficient-based algorithm, more computation time may be required. The purpose of this study is not to present an algorithm improved over the existing method, but to suggest a direction for a new measurement method. Through the experimental results, it was confirmed that measurement results similar to those of the existing method could be obtained.

• Asia Marketing Journal
• /
• v.16 no.1
• /
• pp.35-69
• /
• 2014

The impact of competition on pricing has been studied in the context of counterfactual merger analyses where expected optimal prices in a hypothetical monopoly are compared with observed prices in an oligopolistic market. Such analyses would typically assume static decision making by consumers and firms and thus have been applied mostly to data obtained from consumer packed goods such as cereal and soft drinks. However such static modeling approach is not suitable when decision makers are forward looking. When it comes to the markets for durable products with indirect network effects, consumer purchase decisions and firm pricing decisions are inherently dynamic as they take into account future states when making purchase and pricing decisions. Researchers need to take into account the dynamic aspects of decision making both in the consumer side and in the supplier side for such markets. Firms in a two-sided market typically subsidize one side of the market to exploit the indirect network effect. Such pricing behaviors would be more prevalent in competitive markets where firms would try to win over the battle for standard. While such qualitative expectation on the relationship between pricing behaviors and competitive structures could be easily formed, little empirical studies have measured the extent to which the distinct pricing structure in two-sided markets depends on the competitive structure of the market. This paper develops an empirical model to measure the impact of competition on optimal pricing of durable products under indirect network effects. In order to measure the impact of exogenously determined competition among firms on pricing, we compare the equilibrium prices in the observed oligopoly market to those in a hypothetical monopoly market. In computing the equilibrium prices, we account for the forward looking behaviors of consumers and supplier. We first estimate a demand function that accounts for consumers' forward-looking behaviors and indirect network effects. And then, for the supply side, the pricing equation is obtained as an outcome of the Markov Perfect Nash Equilibrium in pricing. In doing so, we utilize numerical dynamic programming techniques. We apply our model to a data set obtained from the U.S. video game console market. The video game console market is considered a prototypical case of two-sided markets in which the platform typically subsidizes one side of market to expand the installed base anticipating larger revenues in the other side of market resulting from the expanded installed base. The data consist of monthly observations of price, hardware unit sales and the number of compatible software titles for Sony PlayStation and Nintendo 64 from September 1996 to August 2002. Sony PlayStation was released to the market a year before Nintendo 64 was launched. We compute the expected equilibrium price path for Nintendo 64 and Playstation for both oligopoly and for monopoly. Our analysis reveals that the price level differs significantly between two competition structures. The merged monopoly is expected to set prices higher by 14.8% for Sony PlayStation and 21.8% for Nintendo 64 on average than the independent firms in an oligopoly would do. And such removal of competition would result in a reduction in consumer value by 43.1%. Higher prices are expected for the hypothetical monopoly because the merged firm does not need to engage in the battle for industry standard. This result is attributed to the distinct property of a two-sided market that competing firms tend to set low prices particularly at the initial period to attract consumers at the introductory stage and to reinforce their own networks and eventually finally to dominate the market.

• Therapeutic Science for Rehabilitation
• /
• v.12 no.4
• /
• pp.97-109
• /
• 2023

Objective : This study aimed to investigate the mediating effect of play on the relationship between toddlers' sleep habits and problem-solving. Methods : In total, 1,734 participants were selected from the 3rd wave of the Panel Study on Korean Children. A structural equation modeling approach was utilized to examine the relationship among toddlers' play, sleep habits, and problem-solving, as well as to investigate the mediating effect of play. Results : The monthly age of the study participants ranged from 23 to 32 months, with 885 (51.0%) boys and 849 (49.0%) girls. The indirect effects of play on problem-solving skills (β = 0.137, p = .006) were statistically significant, but the direct effects of sleep habits on problem-solving skills (β = -.015, p = .871) and the total effect (β = 0.122, p = .057) were not significant. Conclusion : This study indicated that sleep habits did not have a direct effect on problem-solving ability, but that the indirect effects were significant and fully mediated by play. Incorrect sleep habits can negatively affect lifelong development. Therefore, parents would need to be aware of whether their child is developing good sleep habits during the toddler age.