• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.164-169
• /
• 2001

A comprehensive extension of functions and efficiency of the software system, DS/Block, developed earlier for the purpose of simulation of the motion of a ship block during lifting and turnover operation. A viewpoint change used in 3D-CAD is utilized and saves the time for displays of a series of configurations for the motion. The Euler parameters are adopted to convert 3 rotational degrees of freedom about global coordinate system to those about local coordinate system defined in Pro/ENGINEER. DS/Block provides FEM input data for stress and strain analyses. Several functions are incorporated for user-friendliness. DS/Block is to be tested and installed in a shipyard.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.283-287
• /
• 2003

In recent years, design of an optimal blank shape is very important for sheet metal forming process in the automobile industry because the raw material cost rate is significant part in the automobile industry. With the design of an optimal blank shape, the engineer can protect a blank from an excessive holding force to improve the quality and reduce the ratio of material scrap. Therefore design of an optimal blank shape is inevitable in sheet metal forming process. However, if it causes a complicated shape of blank, it may be difficult to do the blank layout optimally. In this study, we developed software of optimal blank layout connected with the software of optimal blank shape design which was created in the past by the present authors. And by using these softwares, we would like to present the method in order to get optimal utilization ratio easily and precisely within short time for the sequence of works from design to blank layout.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 춘계학술대회 논문집
• /
• pp.267-271
• /
• 1993

Developed in this paper is a feature based modeling of welded plate construction(WPC) which is composed of flat or bended plates represented as reference plane with a constant thickness. First, the necessity and the characteristics of the feature based modeling of WPC as compared with the assemblies of mechanical parts are investigated. Second, feature library for the assemblied of WPC is shown which contains several types of features like joint feature, groove feature, materialfeature and precision feature. Third, the assembly procedures are presented whichmainly consist of both the assembly transformation and the correct assembly checking. Fourth, weld lines generated in the assembled WPC are defined so that those can be used in the process planning or the manufacturing stage. Finally, A prototype system isdeveloped by using a geometric modeling software Pro/Engineer, a graphic software GL(Graphic Library), and C language on a CAD workstation IRIS.

• Journal of Information Processing Systems
• /
• 제15권6호
• /
• pp.1438-1448
• /
• 2019

We present a new technique, called VED (very effective debugging), for detecting and correcting division by zero errors for all types of .NET application. We use applications written in C# because C# applications are distributed through the internet and its executable format is used extensively. A tool called Immunity Debugger is used to reverse engineer executable code to get binaries of source code. With this technique, we demonstrate integer division by zero errors, the location of the error causing assembly language code, as well as error recovery done according to user preference. This technique can be extended to work for other programming languages in addition to C#. VED can work on different platforms such as Linux. This technique is simple to implement and economical because all the software used here are open source. Our aims are to simplify the maintenance process and to reduce the cost of the software development life cycle.

• 기술사
• /
• 제30권2호
• /
• pp.79-86
• /
• 1997

As network has high speed and wide communication capability, users demand diverse and new software to satisfy their needs. To meet users needs, the softwares for multimedia or groupware or distributed virtual environments can communicate the widely distributed information fast and accurately. Even though the technology for this is under development, it is deficient to support the reliable computer communication. Distributed Object System aims, as the new paradigm of distributed system software development to overcome this problem, to obtain in distributed environment the easiness of development and management, expandability, reusability which object oriented technologies support by solving the complexity of communication processing through the object oriented methods. This paper aims to introduce distributed object system, its technological properties and the current status and trend of technology development related to its standardization. Additionally, with explaining the Replicated Shared Object System(RSOS) which is developed in our country as one of the distributed object systems, its future prospects and technical issues are discussed.

• 한국정밀공학회지
• /
• 제10권4호
• /
• pp.30-41
• /
• 1993

Developed in this paper is a feature based modeling system for the design of welded plat construction(WPC) which is composed of flat or bended plates represented as reference plane with a constant thickness. First, the necessity and the characteristics of the modeing system for WPC as compared with the assembly of mechanical parts are investigated. Secondly, feature library for the assembly of WPC is shown which contains several types of features like joint feature, groove feature, material feature, and precision feature. Thirdly, the assembly procedures are presented which mainly consist of both the assembly transformation and the correct assembly checking. Fourthly, weld lines of the assembled WPC are defined so that those can be used in the process planning or the manufacturing stage. Finally, a prototype by a geometric modeling software Pro/Engineer, a graphic software GL(Graphic Library), and C language on a CAD workstation IRIS.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2022년도 제65차 동계학술대회논문집 30권1호
• /
• pp.393-394
• /
• 2022

본 논문에서는 과학기술정보통신부와 통계청에서 주관하고 한국산업인력공단에서 시행(한국데이터산업진흥원 위탁)하는 「빅데이터분석기사」에 대한 필기 및 실기 시험의 내용을 설명하고 지금까지 2회에 걸쳐 시행된 시험에 대한 문제점과 이에 대한 해결방안을 제시하였다. 2021년 처음 시행된 국가기술자격으로써 기존 자격증과의 차별성, 난이도 조정, 수험생들의 각종 민원 발생 등의 문제를 해결하기 위한 체계적인 시스템 마련이 요구되며, 향후 데이터 과학자들에 대한 수요 급증에 대비하기 위해 빅데이터분석 실무 능력을 평가하기 위한 바람직한 제도와 정책이 병행되어야 한다.

• 대한기계학회논문집A
• /
• 제27권12호
• /
• pp.2092-2100
• /
• 2003

Sensitivity information has been used for linearization of nonlinear functions in optimization. Basically, sensitivity is a derivative of a function with respect to a design variable. Design sensitivity is repeatedly calculated in optimization. Since sensitivity calculation is extremely expensive, there are studies to directly use the sensitivity in the design process. When a small design change is required, an engineer makes design changes by considering the sensitivity information. Generally, the current process is performed one-by-one for design variables. Methods to exploit the sensitivity information are developed. When a designer wants to change multiple variables with some relationship, the directional derivative can be utilized. In this case, the first derivative can be calculated. Only small design changes can be made from the first derivatives. Orthogonal arrays can be used for moderate changes of multiple variables. Analysis of Variance is carried out to find out the regional influence of variables. A flow is developed for efficient use of the methods. A software system with the flow has been developed. The system can be easily interfaced with existing commercial systems through a file wrapping technique. The sensitivity information is calculated by finite difference method. Various examples are solved to evaluate the proposed algorithm and the software system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권2호
• /
• pp.486-503
• /
• 2023

Logs play an important role in mastering the health of the system, experienced operation and maintenance engineer can judge which part of the system has a problem by checking the logs. In recent years, many system architectures have changed from single application to distributed application, which leads to a very huge number of logs in the system and manually check the logs to find system errors impractically. To solve the above problems, we propose a method based on Message Middleware and ATT-GRU (Attention Gate Recurrent Unit) to detect the logs anomaly of distributed systems. The works of this paper mainly include two aspects: (1) We design a high-performance distributed logs collection architecture to complete the logs collection of the distributed system. (2)We improve the existing GRU by introducing the attention mechanism to weight the key parts of the logs sequence, which can improve the training efficiency and recognition accuracy of the model to a certain extent. The results of experiments show that our method has better superiority and reliability.

• 대한조선학회논문집
• /
• 제38권2호
• /
• pp.71-78
• /
• 2001

조선분야에서 CNC, 혹은 CAM이 사용되는 분야는 주로 강재 절단, 프로펠러 제작 자동화와 수조 실험용 모델제작에 관한 것이며 대학에서는 대부분 선형과 구조 설계용 CAD 연구를 수행하고 있고 CAM 분야는 활성화되어 있지 않은 편이다. 본 문에서는 Pro/Engineer CAD 시스템으로 3차원 선체 형상을 모델링 하고 이를 CNC 공작기계로 제작하는 과정을 수행하고 부수적으로 이기종 소프트웨어간 데이터 교환을 위한 중립 데이터 양식에 관한 기초 조사연구도 하였다. CIM 과정에서 소프트웨어간의 형상 정보 교환 시 IGES, STEP을 사용할 수 있으나 본 연구에 적용된 CAM s/w에서 STEP을 인식할 수 없어 IGES를 사용하였고 TRIMC VMC 공작기계의 제작물 크기에 제한이 있어 작은 규모의 선박 모형(prototype) 가공을 수행하였다.