• Restorative Dentistry and Endodontics
• /
• 제28권2호
• /
• pp.134-145
• /
• 2003

Mechanical properties and microleakage of two composites [conventional hybrid type DenFil (VERICOM Co., Anyang, Korea) / micro matrix hybrid type Esthet X (Dentsply Caulk, Milford, DE, U.S.A.)] were evaluated to assess whether variable light intensity curing is better than conventional curing technique. Curing was done for 40 seconds in two ways of 2 step soft-start technique and 5 step ramping technique. Three kinds of light intensities of 50, 100, $200{\;}mW/\textrm{cm}^2$ were initially used for 10, 20, 30 seconds each and the maximum intensity of $600 {\;}mW/\textrm{cm}^2$ was used for the rest of curing time in a soft-start curing tech nique. In a ramping technique, curing was done with the same initial intensities and the light intensity was increased 5 times with the same rate to the maximum intensity of $600{\;}mW/\textrm{cm}^2$. After determining conditions that showed no different mechanical properties with conventional technique, Esthet X composite was filled in a class V cavity, which dimension was $4{\times}3{\times}1.5{\;}mm$ and cured under those conditions. Microleakage was evaluated in two ways of dye penetration and maximum gap estimation through SEM observation. ANOVA and Spearman's rho test were used to confirm any statistical significance among groups. The results were as follows : 1 Several curing conditions of variable light intensities resulted in the similar mechanical properties with a conventional continuous curing technique, except conditions that start curing with an initial light intensity of $50{\;}mW/\textrm{cm}^2$. 2. Conventional and ramping techniques were better than soft-start technique in mechanical properties of microhardness and compressive strength. 3. Soft-start group that started curing with an initial light intensity of $100{\;}mW/\textrm{cm}^2$ for 10 seconds showed the least dye penetration. Soft-start group that started curing with an initial light intensity of $200{\;}mW/\textrm{cm}^2$ for 10 seconds showed the smallest marginal gap, if there was no difference among groups. 4. Soft-start technique resulted in better dye-proof margin than conventional technique(p=0.014) and ramping technique(p = 0.002). 5. There was a very low relationship(p=0.157) between the methods of dye penetration and marginal gap determination through SEM evaluation. From the results of this study, it was revealed that ramping technique would be better than conventional technique in mechanical properties, however, soft-start technique might be better than conventional one in microleakage. It was concluded that much endeavor should be made to find out the curing conditions, which have advantages of both aspects or to solve these kinds of problems through a novel idea of polymerization.

• Journal of Power Electronics
• /
• 제18권6호
• /
• pp.1720-1728
• /
• 2018

This paper proposes a novel soft starting algorithm by using PWM inverter technique to control an amplitude of the motor starting current at a single-phase induction motor (SPIM). Traditional SPIM starting methods such as a Split-Phase, Capacitor-Start, Permanent-Split Capacitor (PSC), Capacitor-Start Capacitor-Run (CSCR), basically cannot control the magnitude of starting current due to the fixed system structures. Therefore, in this paper, a soft starting algorithm based on a proportional resonant (PR) control with a variable and constant frequency is proposed to reduce the inrush current and starting up time. In addition, a transition algorithm for operation modes is devised to generate a constant voltage and constant frequency (CVCF). The validity and effectiveness of the proposed soft starting method and transition algorithm are verified through experimental results.

• Journal of Power Electronics
• /
• 제4권2호
• /
• pp.96-101
• /
• 2004

This paper presents an application of SRM drive for LSEV(Low Speed Electric Vehicle). In this paper, a 5〔㎾〕 SRM for a traction of a LSEV is to design and investigate the characteristics of the drive system. The main design parameters and control strategy are given. In the control method, a current control, for the soft-starting technique at a starting operation, is adopted. In the high speed range, an angle control technique is implemented, for a high efficiency drive of SRM. Some experimental tests are executed to find the drive performances.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.456-458
• /
• 1997

The phase-lock technique is applied to a three-phase semi-bridge type battery charger system. Using an inner fast dynamic loop, the phase-locked voltage control (PLVC) technique of three-phase semi-bridge converter is proposed to give a frequency synchronism and to reduce the subharmonics due to the unbalance of transformer or power line. To protect the power devices, the two stage soft-start, function with softly locking the phase and softly increasing the current is presented. As limiting the reference voltage of the inner voltage control loop, muti-lock phenomena are removed on the PLVC loop. A current limit function is also proposed to limit the current of battery and converter. The proposed controller is confirmed through experiment results.

• 한국통신학회논문지
• /
• 제33권7A호
• /
• pp.757-767
• /
• 2008

차세대 이동 통신망의 발전으로 상용 망과 이 기종 망이 서로 겹쳐진 다중 망 구조가 형성될 것이다. 이러한 여러 망이 겹쳐진 다중 망 구조에서 전체 무선자원의 사용 효율을 높이고 Eb/Io (bit energy-to-interference plus noise density ratio)를 개선하기 위해 이기종망간 혹은 동종망간 상호 연동 기술이 필요하다. 본 논문에서는 이러한 동종망과 이기종망들이 서로 겹쳐져 있는 다중 셀 환경에서 load를 효율적으로 분산시킴으로써 무선 자원의 효율을 높이고 신호의 간섭양을 줄여 사용자의 QoS 보장 및 성능 개선을 위한 soft load balancing algorithm을 제안 및 분석한다. 본 논문에서는 수학적 분석을 통해 효율적인 load sharing을 위한 최적의 LBR (load balancing ratio) 을 구하고 이를 이용하여 각 network에 traffic 양을 할당하여 서비스한다. 그러므로 soft load balancing 알고리듬은 보다 안정적인 데이터 전송을 가능하게 한다.

• Restorative Dentistry and Endodontics
• /
• 제33권5호
• /
• pp.428-434
• /
• 2008

본 연구는 1급 복합레진 수복물에서 할로겐 광조사기를 이용한 4가지 중합방법이 상아질의 결합강도에 미치는 효과를 알아보기 위하여 시행하였다. 발거된 상 하악 대구치 20개의 교합면측 법랑질을 Diamond Wheel Saw를 이용하여 제거한 후 1급 와동을 형성하였다. 중합방법에 따라 파동지연 중합방법 (PD) 군, 연성 중합방법 (SS) 군, 파동 중합방법 (PC) 군, 지속 중합방법 (CC) 군의 4개 군으로 분류하고, Z250 복합레진을 각 군의 와동에 충전한 후 광조사하였다. 각 군의 시편을 주수하에 접착계면의 단면적이 $1mm^2$가 되도록 절단하여 막대모양의 시편을 제작하였고, 각 군당 20개의 시편을 사용하여 미세인장 결합강도를 측정하여 다음과 같은 결과를 얻었다. 1. PD 군은 PC 군과 CC 군보다 통계학적으로 더 높은 미세인장 결합강도를 나타내었다. 2. SS군의 미세인장 결합강도는 PC 군과 CC 군보다 높게 나타났으나, 통계학적으로 유의한 차이를 나타내지 않았다. 결론적으로, 1급 복합레진 수복물을 중합할 때 파동지연 중합방법과 연성 중합방법을 사용하여 중합속도를 조절함으로써 상아질과 복합레진의 결합강도를 개선할 수 있을 것으로 사료된다.

• 산업기술연구
• /
• 제29권B호
• /
• pp.193-198
• /
• 2009

In this paper, we developed remote dimming control system of electronic ballast for 400W metal halide lamp. This ballast could limit ignition current and soft start-up technique by the inverter with LCsCp resonance tank. The dimming circuit can dim from 400W to 200W by varying of the inverter switching frequency. The PLM consists of coupling circuit, BPF(Band-Pass Filter), FSK(Frequency Shift Keying) Modem and ${\mu}$-controller(Micro Controller). By coupling electronic ballast with PLM, the system that able to dimming the lamp through PLM is demonstrated by experimental results.

• Archives of Reconstructive Microsurgery
• /
• 제10권2호
• /
• pp.124-130
• /
• 2001

Both of latissimus dorsi and rectus abdominis muscles are workhorse for various reconstructive surgeries. These muscle flaps have been used widely for soft tissue coverage, tissue augmentation, and functional muscle transfer. However, the traditional method for muscle harvest requires a long incision that often results in an unsightly scar and becomes the main concern of the patient. The purpose of this study is to introduce our clinical experience of endoscopic harvest of latissimus dorsi muscle and rectus abdominis muscle, and to make comparison with traditional harvest of these two muscle flaps. Of the 13 rectus abdominis muscles free flaps, 6 muscles were harvested traditionally and 7 muscles were harvested with endoscopic assistance. Of the 21 latissimus dorsi muscle free flaps, 12 muscles were harvested traditionally and 9 muscles were harvested with endoscopic assistence. Follow up period was between 6 months and 24 months. The patients age ranged from 7 to 70 years old. The result revealed no statistically significant differences in the amount of intraoperative bleeding, incidence of postoperative hematoma and seroma, and the incidence of donor-site wound infection. However, patients feel less pain and start earlier and better movement after the operation with endoscopically assisted harvest. This technique is easy to learn, is safe, and can reduce substantially the donor site morbidity comparing traditional harvesting technique.