• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1256-1263
• /
• 2010

Suction Drain Method is soft ground improvement technique, in which a vacuum pressure can be directly applied to the Vertical Drain Board to promote consolidation and strengthening the soft ground. This method does not require a surcharge load, different to embankment or Preloading Method. In this study, ground improvement efficiency of suction drain method was estimated when duplex loading pressure with vacuum and pressure. During suction drain method process, surface settlement and pore pressure were monitored, and cone resistance test as well as water content were also measured after the completion of Suction Drain Method treatment.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.432.2-432.2
• /
• 2014

Recently, colloidal core/shell type quantum dots lighting-emitting diodes (QDLEDs) have been extensively studied and developed for the future of optoelectronic applications. In the work, we fabricate an inverted CdSe/ZnS quantum dot (QD) based light-emitting diodes (QDLED)[1]. In order to reduce work function of indium tin oxide (ITO) electrode for inverted structure, a very thin (<10 nm) polyethylenimine ethoxylated (PEIE) is used as surface modifier[2] instead of conventional metal oxide electron injection layer. The PEIE layer substantially reduces the work function of ITO electrodes which is estimated to be 3.08 eV by ultraviolet photoemission spectroscopy (UPS). From transmission electron microscopy (TEM) study, CdSe/ZnS QDs are uniformly distributed and formed by a monolayer on PEIE layer. In this inverted QD LED, two kinds of hybrid organic materials, [poly (9,9-di-n-octyl-fluorene-alt-benzothiadiazolo)(F8BT) + poly(N,N'-bis (4-butylphenyl)-N,N'-bis(phenyl)benzidine (poly-TPD)] and [4,4'-N,N'-dicarbazole-biphenyl (CBP) + poly-TPD], were adopted as hole transport layer having high highest occupied molecular orbital (HOMO) level for improving hole transport ability. At a low-operating voltage of 8 V, the device emits orange and red spectral radiation with high brightness up to 2450 and 1420 cd/m2, and luminance efficacy of 1.4 cd/A and 0.89 cd/A, respectively, at 7 V applied bias. Also, the carrier transport mechanisms for the QD LEDs are described by using several models to fit the experimental I-V data.

• 대한토목학회논문집
• /
• 제29권6C호
• /
• pp.287-294
• /
• 2009

석션드레인공법은 지반 내 배수재를 타설하고 진공압을 배수재에 직접 가해 전응력이 일정한 상태에서 간극수를 배출하여 유효응력을 증가시키고 이로 인해 전응력의 변화 없이 강도를 증진하고 압밀 촉진을 유도하는 새로운 연약지반 개량 공법이다. 본 논문에서는 서해안 해성 점성토 지반에 적용된 석션드레인공법의 시공 사례를 제시하였다. 석션드레인공법이 적용된 지반의 개량효과를 확인하기 위해 현장 계측과 실내시험 결과를 분석하였으며, 수치해석을 통해 설계치와 실측치를 비교하였다. 석션드레인공법과 기존 성토재하공법의 침하량 비교결과 기존 성토재하공법을 대체할 수 있는 침하거동이 발생함을 확인 하였다. 현장 계측 및 실내시험을 통해 지반개량 효과를 분석한 결과 석션드레인공법 적용 지반의 침하량이 2.3배 더 크게 발생함을 확인하였으며, 개량 후 비배수 전단강도는 약 300~400% 증가하였다. 또한 함수비는 약 30% 감소하였으며, 선행압밀하중은 약 $0.52kgf/cm^2$ 정도가 증가하였다.

• Geomechanics and Engineering
• /
• 제19권5호
• /
• pp.447-462
• /
• 2019

The vacuum preloading method has been used in many countries for ground improvement and land reclamation works. A sand cushion is required as a horizontal drainage channel for conventional vacuum preloading. In terms of the dredged-fill foundation soil, the treatment effect of the conventional vacuum preloading method is poor, particularly in Tianjin, China, where a shortage of sand exists. To solve this problem, straight-line vacuum preloading without sand is widely adopted in engineering practice to improve the foundation soil. Based on the engineering properties of dredged fill in Lingang City, Tianjin, this paper presents field instrumentation in five sections and analyzes the effect of a prefabricated vertical drain (PVD) layout and a vacuum pumping method on the soft soil ground treatment. Through the arrangement of pore water pressure gauges, settlement marks and vane shear tests, the settlement, pore water pressure and subsoil bearing capacity are analyzed to evaluate the effect of the ground treatment. This study demonstrates that straight-line vacuum preloading without sand can be suitable for areas with a high water content. Furthermore, the consolidation settlement and consolidation degree system is developed based on the grey model to predict the consolidation settlement and consolidation degree under vacuum preloading; the validity of the system is also verified.

• 대한토목학회논문집
• /
• 제30권5C호
• /
• pp.201-208
• /
• 2010

본 연구에서는 대심도 연약지반 개량에 많이 사용되고 있는 성토재하공법과 대기압재하방식 진공압밀공법의 현장계측자료를 분석하여 하중재하방식에 따른 지반의 침하거동 차이를 분석하였다. 이를 위해 준설토로 매립된 초연약지반인 ${\bigcirc}{\bigcirc}$지역 항만부지 축조공사의 현장계측 자료를 이용하였으며, 진공압밀공법 적용구간과 성토재하공법 적용구간에서의 계측결과를 비교하여 진공압밀공법이 적용된 지역의 압밀특성을 분석하였다. 이에 잔류침하량 도달까지의 재하시간을 분석한 결과, 진공압밀공법 구간이 성토재하공법 구간보다 45% 정도 빠르게 허용 침하량에 도달하는 것으로 나타났다. 이는 진공압밀시 등방압밀 효과로 인하여 전단파괴 없이 일시에 하중재하가 가능하기 때문에 이러한 하중재하 기간의 차이가 허용침하량 도달시간을 단축시킨 것으로 판단된다.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.137-138
• /
• 2006

TPOs based on polypropylene has been dominating materials in hard automotive parts such as in bumper fascia, instrumental panel and door trim panel owing to their variety of advantages compared to engineering plastics and steels for years. Recently as environmental regulations related to recycle have been strengthened, the use of TPOs in soft automotive parts such as instrument panel skin and door trim skin is being required much more.. Therefore, in this study, we' d like to give an overview of soft TPOs and introduce soft TPO materials requirement and preferable materials composition by vacuum thermoforming and powder slush molding, respectively.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.529-536
• /
• 2002

The purpose of this paper os to present and discuss some of flow and drain observed in modelling results. Because dredged fill ground of Yul-Chon located in the south coast of Korea is very soft, this ground should be improved after operation of surface stabilization. There are surface stabilization method such as chemical stabilization, desiccation, horizontally vacuum drain, replacement, and geosynthetics. In Yul-Chon, PTM(Progressive Trenching Method) is adopted to provide the necessity condition of surface desiccation. In the case trench in the dredged soft ground is formed by PTM equipment, pore water in the ground is drained through trench. There, drain and desiccation of surface ground increase, and bearing capacity is improved. In this research, when trench in the dredged soft ground is formed by PTM equipment, permeable characteristics and drain efficiency of pore-water are analyzed using SEEP/W software package. Results show variation of total head, pressure head, flux, hydraulic gradient, and flow quantity.

• 대한족부족관절학회지
• /
• 제12권2호
• /
• pp.156-162
• /
• 2008

Purpose: Open fractures of the foot and ankle require prompt repair of the wound due to the complexity of anatomy, insufficiency of soft tissues and inadequate blood supply. Early flaps and skin grafts are used for this purpose yet general condition of the patient as well as local wound environment often precludes such treatment options. Vacuum- Assisted Closure (VAC) is recently being used in such cases. This study was done to validate the use of VAC together with silver antimicrobial dressing materials in contaminated open fracture wounds. Materials and Methods: We have selected 10 patients with Gustillo-Anderson type III open fractures of the foot & ankle treated with VAC and silver antimicrobial dressing materials from March 2007 to January 2008. The relationship between duration of treatment with wound size, contamination, and degree of soft tissue damage was analyzed. Results: The average age of patients was 36.6 years. The average amount of VAC application time was 23.4 days. Silver dressing materials were used for 16.8 days. Average wound healing time was 51.9 days. Statistically significant relationship was found between wound size, VAC application time and silver dressing material application time. No complications such as osteomyelitis were found after treatment. Conclusion: VAC technique is recently being used in open fractures with wide skin and soft tissue defects, producing good results. A wide array of dressing materials such as silver dressing is in development. We have incorporated the VAC technique together with silver dressing materials in the treatment of open fractures and achieved complication free results.

• 대한소아치과학회지
• /
• 제25권3호
• /
• pp.539-544
• /
• 1998

저자는 열성형재료와 진공성형기를 이용하여 소아치과 임상에서 사용되는 수 종의 장치를 제작하였다. 전공성형기의 구입에 따른 경제적인 부담은 있으나, 기존의 제작법에 비해 제작이 간편하여 시간이 단축될 뿐 아니라 plate 의 두께가 균일하므로 finishing이 거의 필요하지 않으며 더욱 심미적인 장치를 제작할 수 있다. 또한 조직과 접촉하는 부위는 soft한 열성형재료를 사용하여 치아 이동에 유리할 뿐 아니라, 기존의 resin에 비해 불쾌한 맛이 적다는 장점이 있다. Monomer가 없어 조직에 자극이 적고 mutagenous potential이 없으므로 생체 적합성이 뛰어나 조직의 적응이 용이하다. 복잡하거나 특수한 기능 및 견고성이 필요한 악기능교정 장치 등에서는 그 사용이 제한된다는 한계점이 있으나, 소아치과 임상에서 사용되는 대부분의 장치를 쉽고 간편하게 제작할 수 있어 앞으로 임상에서 널리 이용될 수 있을 것으로 생각된다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.247-254
• /
• 2000

The base pressure of vacuum vessel of the KSTAR (Korea Superconducting Tokamak Advanced Research) Tokamak is to be a ultra high vacuum, $10^{-6}{\sim}10^{-7}Pa$, to produce clean plasma with low impurity containments. For this purpose, the KSTAR vacuum vessel and plasma facing components need to be baked up to at least $250^{\circ}C,\;350^{\circ}C$ respectively, within 24 hours by hot nitrogen gas from a separate baking/cooling line system to remove impurities from the plasma-material interaction surfaces before plasma operation. Here by applying the implicit numerical method to the heat balance equations of the system, overall temperature distributions of the KSTAR vacuum vessel and plasma facing components are obtained during the whole baking process. The model for 2-dimensional baking analysis are segmented into 9 imaginary sectors corresponding to each plasma facing component and has up-down symmetry. Under the resulting combined loads including dead weight, baking gas pressure, vacuum pressure and thermal loads, thermal stresses in the vacuum vessel during bakeout are calculated by using the ANSYS code. It is found that the vacuum vessel and its supports are structurally rigid based on the thermal stress analyses.