• Journal of the Korean Geotechnical Society
• /
• v.37 no.4
• /
• pp.27-37
• /
• 2021

An individual vacuum consolidation system has gained a popularity for a ground improvement of soft clayey soil. Finite element anaylses have been performed to simulate the individual vacuum consolidation system using a Plaxis 2D. The modelling procedures of the vacuum consolidation system are presented with the results of an unit-cell analysis. In addition, a case study was carried out to assess the applicability of the Plaxis 2D for simulating the consolidation behavior of soft ground subjected to the individual vacuum pressure.

• Geomechanics and Engineering
• /
• v.6 no.4
• /
• pp.377-389
• /
• 2014

The vacuum consolidation method which was proposed by Kjellman in 1952 has been studied extensively and used successfully since early 1980 throughout the world, especially in East and Southeast Asia. Despite the increased successful use, different opinions still exist, especially in connection to distribution of vacuum with depth and time in vertical drains and in soil during preloading of soft ground. Porewater pressure measurements from actual cases of field vacuum and vacuum-fill preloading as well as laboratory studies have been examined. It is concluded that (a) a vacuum magnitude equal to that in the drainage blanket remains constant with depth and time within the vertical drains, (b) as expected, vacuum does not develop at the same rate within the soil at different depths; however, under ideal conditions vacuum is expected to become constant with depth in soil after the end of primary consolidation, and (c) there exists a possibility of internal leakage in vacuum intensity at some sublayers of a soft clay and silt deposit. A case history of vacuum loading with sufficient subsurface information is analyzed using the ILLICON procedure.

• Vacuum Magazine
• /
• v.1 no.1
• /
• pp.17-20
• /
• 2014

This article introduces the basic concepts of various soft X-ray spectroscopies in the study of surface and interface electronic structures. Especially, recent results of X-ray photoelectron spectroscopy experiments on organic/inorganic thin films and a lead-free solder alloys will be discussed. Soft X-ray spectroscopies to understand the chemical and electrical properties would be of broad interest in the vacuum science communities.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.467-472
• /
• 2010

Individual vacuum pressure method is soft ground improvement technique, in which a vacuum pressure can be directly applied to the vertical drain board to promote consolidation and strengthening the soft ground. This method does not require a surcharge load, different to embankment or pre-loading method. In this study, given the inner displacement of the ground where the individual vacuum pressure is applied, this dissertation aimed to reproduce the state of stress in the ground that is subject to the constraints created by the depth of improvement area. Modified Cam Clay theory which made it possible to take into account the isotropic displacement of the ground was applied to the NAP-IVP used simulation; the conception of equivalent permeability proposed by Hird was also applied so that the 3-dimensional real construction effect of drain materials could be reflected in the analysis.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.3
• /
• pp.15-27
• /
• 2013

A vacuum pressure method has been developed to solve many problems in the conventional surcharge method such as embankments, and its application has increased in the country. Recently, to control target settlements in the field, there have been many studies on the comparison of settlements between vacuum pressure method and surcharge load method in the same conditions. In this study, the settlement characteristics of soil subjected to vacuum pressure and surcharge pressure are discussed. The results indicate that if vacuum pressure is applied to the improvement of soft ground, there will be inward lateral displacement and the vacuum pressure will induce generally less settlement than a surcharge load of the same magnitude. The range of settlement reduction ratio is 0.54~0.67 based on Hooke's law, 0.91 based on field cases, 0.81 based on laboratory oedometer tests, 0.75 based on the theory of elasticity and coefficient of volumetric compressibility and 0.77~0.93 in its recent applications to the thick soft ground.

• Geomechanics and Engineering
• /
• v.1 no.3
• /
• pp.179-191
• /
• 2009

For a two-way drainage deposit under a surcharge load, it is possible to leave a layer adjacent to the bottom drainage boundary without prefabricated vertical drain (PVD) improvement and achieve approximately the same degree of consolidation as a fully penetrated case. This depth is designated as an optimum PVD installation depth. Further, for a two-way drainage deposit under vacuum pressure, if the PVDs are fully penetrated through the deposit, the vacuum pressure will leak through the bottom drainage boundary. In this case, the PVDs have to be partially penetrated, and there is an optimum installation depth. The equations for calculating these optimum installation depths are presented, and the usefulness of the equations is studied by using finite element analysis as well as laboratory model test results.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2005.02a
• /
• pp.79-79
• /
• 2005

• Proceedings of the Korean Vacuum Society Conference
• /
• 1996.06a
• /
• pp.107-107
• /
• 1996

• Proceedings of the Korean Vacuum Society Conference
• /
• 2008.02a
• /
• pp.146-146
• /
• 2008

• Proceedings of the Korean Vacuum Society Conference
• /
• 2004.08a
• /
• pp.62-62
• /
• 2004