• 한국자기학회지
• /
• 제7권4호
• /
• pp.180-185
• /
• 1997

비정질 리본으로 제조된 링 코아 시편의 자장중 열처리 조건에 따른 철손 및 보자력 등의 연자기 특성 변화를 BH loop tracer를 이용하여 최대인가자기유도 0.1 T를 유지하면서 10 kHz에서 측정하였다. 열처리 시간이 증가함에 따라 코아의 철손 및 보자력은 감소하여 최소값에 도달한 다음 다시 증가한다. 공기 중에서 열처리한 경우의 시료가 Ar 분위기에서 열처리한 시료 보다 우수한 연자기 특성을 나타낸다. 코아의 원주방향으로 자장을 인가한 경우에는 인가자장의 세기가 6 Oe 이상이어야 자장중 열처리 효과가 나타나 철손 및 보자력이 감소하였으며, 냉각시 Curie 온도근처에서의 냉각속도가 빠를 수록 철손과 보자력은 감소한다. 코아의 폭 방향으로 자장을 인가한 경우에는 보자력의 증가와 투자율의 감소 및 약간의 철손 증가가 나타났다.

• 공업화학
• /
• 제34권4호
• /
• pp.347-356
• /
• 2023

액정 엘라스토머 섬유는 1차원 형태로서 소프트 로봇, 생체모방 구동기 등의 다양한 분야에서 광범위하게 응용되고 있다. 액정 엘라스토머는 액체의 유동성과 고체의 질서도 그리고 고무의 탄성을 포함하며 이를 바탕으로 한 자극-응답성을 가지고 있다. 특히, 형상가변 측면에서 열, 빛, 전기장, 자기장 등의 다양한 자극에 대한 응답성을 프로그래밍하여 사용하면 높은 자유도와 더불어 물건 들어올리기, 꼬임, 회전 등 다양한 움직임을 구현할 수 있다. 따라서, 액정 엘라스토머 섬유는 인공근육, 소프트로봇, 웨어러블 기술, 센싱 기술 등 다양한 분야로의 응용가능성을 가지고 있다. 이런 액정 엘라스토머 섬유의 연구는 기존 단순 섬유를 넘어서는 다양한 기능성을 포함할 수 있는 스마트 소재로서 도래한 4차 산업에서 다양한 분야에 활용도가 높다고 평가된다. 본 총설에서는 액정 엘라스토머 섬유의 구조 및 기본 특성에 대해 소개하고, 배향 기반 제작법과 이를 이용한 인공근육, 스마트 패브릭, 소프트 로봇 등, 다양한 응용에 대해 최신 연구 동향을 소개한다.

• Journal of Magnetics
• /
• 제5권4호
• /
• pp.120-123
• /
• 2000

Co-Ni-Fe-N thin films were fabricated by a $N_2$ reactive rf magnetron sputtering method. The nitrogen partial pressure ($P_{N2}$) was varied in the range 0~10% . As$P_{N2}$ increases in this range, the saturation magnetization $B_s$ linearly decreases from 19.8 kG to 14 kG and the electrical resistivity ($\rho$) increases from 27 to 155 $\mu\Omegacm$. The coercivity $H_c$ exhibits the minimum value at 4% $P_{N2}$. The magnetic anisotropy fields ($H_k$) are in the range of 20$\sim$50 Oe. High frequency characteristics of $(Co_{22.2}Ni_{27.6}Fe_{50.2})_{100-x}N_x$ films are excellent in the range of 3$\sim$5% of $P_{N2}$. In particular, the effective permeability of the film fabricated at 4% $P_{N2}$ is 800, which is maintained up to 600 MHz. This film also shows Bs of 17.5 kG, $H_c$/ of 1.4 Oe, resistivity of 98$\mu\Omegacm$ and $H_k$ of about 25 Oe. Also, the corrosion resistance of $(Co_{22.2}Ni_{27.6}Fe_{50.2})_{100-x}N_x$ films was imp roved with increasing N concentration.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2000년도 International Symposium on Magnetics The 2000 Fall Conference
• /
• pp.492-499
• /
• 2000

Co-Ni-Fe-N thin films were fabricated by a N$\sub$2/ reactive rf magnetron sputtering method. The nitrogen partial pressure (P$\sub$N2/) was varied in the range of 0∼10%. As P$\sub$N2/ increases in this range, the saturation magnetization (B$\sub$s/) linearly decreases from 19.8 kG to 14 kG and the electrical resistivity ($\rho$) increased from 27 to 155 ${\mu}$$\Omega$cm. The coercivity (H$\sub$c/) exhibits the minimum value at 4% of P$\sub$N2/. The magnetic anisotropy (H$\sub$k/) are in the range of 20∼50 Oe. High frequency characteristics of (Co$\sub$22.2/Ni$\sub$27.6/Fe$\sub$50.2/)$\sub$100-x/N$\sub$x/ films are excellent in the range of 3∼5% of P$\sub$N2/. Especially the effective permeability of the film fabricated at 4% of P$\sub$N2/ is 800, which is maintained up to 600 MHz. This film also shows Bs of 17.5 kG, H$\sub$c/ of 1.4 Oe, resistivity of 98 $\Omega$cm and H$\sub$k/ of about 25 Oe. Also, the corrosion resistance of (Co$\sub$22.2/Ni$\sub$27.6/Fe$\sub$50.2/)$\sub$100-x/N$\sub$x/ were improved with the increase in N concentration.

• Journal of the Korean Wood Science and Technology
• /
• 제51권1호
• /
• pp.1-13
• /
• 2023

Sengon (Falcataria moluccana Miq.) tree offers a wood of low quality and durability owing to its low density and thin cell walls. This study aimed to improve the properties of sengon wood by making the wood magnetic, producing new functions, and characterizing magnetic sengon wood. Each wood sample was treated using one of the following impregnation solutions: Untreated, 7.5% nano magnetite-furfuryl alcohol (Fe₃O₄-FA), 10% nano Fe₃O₄-FA, and 12.5% nano Fe₃O₄-FA. The impregnation process began with vacuum treatment at 0.5 bar for 2 h, followed by applying a pressure of 1 bar for 2 h. The samples were then tested for dimensional stability and density and characterized using scanning electron microscopy and energy-dispersive X-ray spectroscopy (SEM-EDX), Fourier transform infrared spectrometry (FTIR), X-ray diffraction (XRD) analysis, and vibrating sample magnetometry (VSM) analysis. The results showed that the Fe₃O₄-FA impregnation treatment considerable affected the dimensional stability, measured in terms of weight percent gain, anti-swelling efficiency, water uptake, and bulking effect, as well as the density of sengon wood. Changes in wood morphology were detected by the presence of Fe deposits in the cell walls and cell cavities of the wood using SEM-EDX analysis. XRD and FTIR analyses showed the appearance of magnetite peaks in the diffractogram and Fe-O functional groups. Based on the VSM analysis, treated sengon wood is classified as a superparamagnetic material with soft magnetic properties. Overall, 10% Fe₃O₄-FA treatment led to the highest increase in dimensional stability and density of sengon wood.

• Journal of Magnetics
• /
• 제6권4호
• /
• pp.122-125
• /
• 2001

Phase relationships of the HDDR (hydrogenation, disproportionation, desorption and recombination)-treated Sm$_3$(Fe,M)$_{29}$-type alloy with chemical composition of Sm$_{9}$Fe$_{65}$ $Co_{20}$V$_{6}$ were studied by X-ray diffraction (XRD) and by thermomagnetic analysis (TMA). The alloy was disproportionated into a mixture of $SmH_{x}$ and $\alpha$-Fe at high temperature under hydrogen gas. The disproportionated material was recombined into a mixture of Sm-(Fe,M) (M = Co and/or V) and $\alpha$-Fe phases. The structure of the Sm-(Fe,M) phase was dependent upon the recombination conditions, and a detailed phase diagram showing the phase relationships in the HDDR-treated alloy has been established. The Sm-(Fe,M) phase in material recombined above $900^{\circ}C$ had the $Sm_2Fe_{17}$-type structure, and it exhibited the $SmFe_{7}$-type structure when recombined at temperatures ranging from $700^{\circ}C$ to $850^{\circ}C$. Recombination below $650^{\circ}C$ led to the $SmFe_3$-type structure of the Sm-(Fe,M) phase. Curie temperatures of the Sm-(Fe,M) phases in the recombined material were significantly higher than those of the corresponding stoichiometric phases. It was suggested that the chemical composition of the Sm-(Fe,M) phases may be significantly different from that of the corresponding stoichiometric phases. All the HDDR-treated $Sm_{9}Fe_{65}Co_{20}V_{6}$ materials showed the soft magnetic features regardless of the phase constitution.n.

• Journal of Korean Neurosurgical Society
• /
• 제53권1호
• /
• pp.46-48
• /
• 2013

Chondrosarcoma is a very uncommon malignant primary bone tumor, especially, it occurs extremely rare in the spine. A 52-year-old man was admitted to the emergency room with sudden paraplegia. Twelve hours prior to a paraplegic event, he visited an outpatient clinic with discomfort and tenderness around the medial border of the right scapular, and his neurologic status was absolutely intact. Magnetic resonance imaging showed a lobulated soft tissue mass from T3 to T5, which extended to the epidural space. Computed tomography scans showed soft tissue mass on the spinal posterior arch and osteolytic change of the adjacent bony structures. Emergent surgery was performed and the lesion was removed. Dark reddish blood and gel-like material were encountered around the dura and posterior arch during the operation. Multiple pulmonary nodules were found on a chest CT scan and a biopsy of one of them had been proven to be a metastasis of chondrosarcoma. The histologic examination showed dedifferentiated chondrosarcoma. The patient's neurologic deficit was improved slowly from ASIA A to ASIA D. Chondrosarcoma in the spine is extremely rare, even more with acute hemorrhage and sudden expansion into the epidural space. We named it chondrosarcoma apoplexy. We should consider the possibility of a hemorrhagic event when the patient's neurologic deficit worsens suddenly with spinal bone tumor.

• 한국정보통신학회논문지
• /
• 제11권10호
• /
• pp.1986-1991
• /
• 2007

본 논문에서 지구자기장을 측정하여 방위를 결정하는 자기 저항 소자의 경사각의 이상 현상에서 있어 예측할 수 없는 특성에 대해 불확실성에서의 추론을 통해 센서로서의 안정성을 확보하는데 그 목적이 있다. 따라서 퍼지 알고리즘을 적용하여 외부 환경 변화에 민감하게 변화하는 소자의 왜곡현상을 프로그래밍 적인 요소를 실험하여 센서의 왜율적인 요소에서 벗어남을 보인다. 나아가 소자의 고속, 고신뢰성을 갖는 응용에 사용할 수 있음을 보인다.

• 한국자기학회지
• /
• 제19권2호
• /
• pp.62-66
• /
• 2009

연자성 금속재료인 $Fe_{94}Si_5Cr_1$을 30시간 볼밀 한 후 주사전자현미경을 사용하여 관찰한 결과 볼밀 가공한 FeSiCr의 입자들이 구형에서 편상으로 변함을 확인하였다. FeSiCr을 실리콘 고무와 혼합하여 핸드폰용 전파흡수체를 제조하고 network analyzer을 이용하여 두께에 따른 FeSiCr-고무 전파흡수체의 전파흡수특성 및 재료정수를 측정하였으며, 그들의 상관관계를 비교 조사하였다. 그 결과 sheet형 전파흡수체 두께에 따라서 정합주파수가 낮은 주파수 대역으로 shift 됨을 알 수 있고, 1.3 mm의 두께로 제조한 전파흡수체에서는 이동통신주파수 대역인 1.86 GHz에서 -8.3 dB의 반사손실을 보여주었다.

• 한국분말재료학회지
• /
• 제16권1호
• /
• pp.33-36
• /
• 2009

In order to increase the magnetic loss for electromagnetic(EM) wave absorption, the soft magnetic $Fe_{73}Si_{16}B_7Nb_3Cu_1$(at%) alloy strip was used as the basic material in this study. The melt-spun strip was pulverized using an attrition mill, and the pulverized flake-shaped powder was crystallized at $540^{\circ}C$ for 1h to obtain the optimum grain size. The Fe-based powder was mixed with 2 wt% $BaTiO_3$, $0.3{\sim}0.6$ wt% carbon black, and polymer-based binders for the improvement of electromagnetic wave absorption properties. The mixture powders were tape-cast and dried to form the absorption sheets. After drying at $100^{\circ}C$ for 1h, the sheets of 0.5 mm in thickness were made by rolling at $60^{\circ}C$, and cut into toroidal shape to measure the absorption properties of samples. The characteristics including permittivity, permeability and power loss were measured using a Network Analyzer(N5230A). Consequently, the properties of electromagnetic wave absorber were improved with the addition of both $BaTiO_3$ and carbon black powder, which was caused by the increased dielectric loss of the additive powders.